• The korean journal of orthodontics
• /
• v.21 no.3
• /
• pp.673-683
• /
• 1991

This research was performed to find out the adaptation patterns of maxillary and mandibular posterior teeth to the changes in relationships of vertical skeletal components, which constitute the skeletofacial complex. For this research, 61 adult malocclusion patients were chosen as subjects according to the Hellman's dental age with normally ranged FMN-A-B angle. These subjects were divided into 4 groups in maxilla and 3 groups in mandible according to mesiodistal inclinations of teeth. Following results were obtained after studying the relationships of the vertical skeletal components between each group. 1. Inspire of the fact that the FMN-A-B angle was within a normal range, the degree of mesiodistal inclinations of maxillary and mandibular posterior teeth showed differences in relation to the anteroposterior relationships of maxilla and mandible. In case where the FMN-A-B angle was large, the mesial inclinations of maxillary posterior teeth showed more increase from the posterior to the anterior, whereas in mandible it showed overall decrease. 2. The degrees of mesial inclinations of mandibular posterior teeth were increased when the angulations of lower facial height, occlusal plane angle and mandibular plane angle were greater. 3. The patterns of mesial inclinations of maxillary posterior teeth were varied according to the angulation of lower facial height. If relatively large, it showed more increase from the posterior to the anterior and it was decreased nearly consistent when the angulation was small. 4. The degrees of mesial inclinations of maxillary posterior teeth were decreased as the lower facial height, palatal plane angle, occlusal plane angle and the mandibular plane angle became greater.

• The korean journal of orthodontics
• /
• v.34 no.2 s.103
• /
• pp.153-163
• /
• 2004

The purpose of this study was to evaluate the postretention change of class II malocclusion treatment and to examine which factors were related to the relapse. Seventy-eight treated cases were divided into two groups according to the stability of treatment results. Various measurements in pre-treatment and post-treatment lateral cephalograms were evaluated and comparisons were drawn between the stable and relapse group by t-test and correlation analysis. 1. There were only a row differences in the skeletodental relationship in the pre-treatment phase between the stable and the relapse group. 2. Mandibles in the stable group were repositioned mote anteriorly than those in the relapse group. 3. Mandibular incisors were more uprighted to the basal bone and maxillary incisors were less lingualized in the stable group than in the relapse group. 4. Occlusal plane was inclined forward and downward in the relapse group.

• The korean journal of orthodontics
• /
• v.46 no.5
• /
• pp.280-289
• /
• 2016

Objective: The aim of this study was to analyze tooth movement and arch width changes in maxillary dentition following nonextraction treatment with orthodontic mini-implant (OMI) anchorage in Class II division 1 malocclusions. Methods: Seventeen adult patients diagnosed with Angle's Class II division 1 malocclusion were treated by nonextraction with OMIs as anchorage for distalization of whole maxillary dentition. Three-dimensional virtual maxillary models were superimposed with the best-fit method at the pretreatment and post-treatment stages. Linear, angular, and arch width variables were measured using Rapidform 2006 software, and analyzed by the paired t -test. Results: All maxillary teeth showed statistically significant movement posteriorly (p < 0.05). There were no significant changes in the vertical position of the maxillary teeth, except that the second molars were extruded (0.86 mm, p < 0.01). The maxillary first and second molars were rotated distal-in ($4.5^{\circ}$, p < 0.001; $3.0^{\circ}$, p < 0.05, respectively). The intersecond molar width increased slightly (0.1 mm, p > 0.05) and the intercanine, interfirst premolar, intersecond premolar, and interfirst molar widths increased significantly (2.2 mm, p < 0.01; 2.2 mm, p < 0.05; 1.9 mm, p < 0.01; 2.0 mm, p < 0.01; respectively). Conclusions: Nonextraction treatment with OMI anchorage for Class II division 1 malocclusions could retract the whole maxillary dentition to achieve a Class I canine and molar relationship without a change in the vertical position of the teeth; however, the second molars were significantly extruded. Simultaneously, the maxillary arch was shown to be expanded with distal-in rotation of the molars.

• The korean journal of orthodontics
• /
• v.50 no.3
• /
• pp.216-226
• /
• 2020

Root resorption can be caused by several factors, including contact with the cortical bone. Here we report a case involving a 21-year-old female with Angle Class II, division 1 malocclusion who exhibited significant root resorption in the maxillary right central incisor after orthodontic treatment. The patient presented with significant left-sided deviation of the maxillary incisors due to lingual dislocation of the left lateral incisor and a Class II molar relationship. Cephalometric analysis demonstrated a Class I skeletal relationship (A point-nasion-B point, 2.5°) and proclined maxillary anterior teeth (upper incisor to sella-nasion plane angle, 113.4°). The primary treatment objectives were the achievement of stable occlusion with midline agreement between the maxillary and mandibular dentitions and appropriate maxillary anterior tooth axes and molar relationship. A panoramic radiograph obtained after active treatment showed significant root resorption in the maxillary right central incisor; therefore, we performed cone-beam computed tomography, which confirmed root resorption along the cortical bone around the incisive canal. The findings from this case, where different degrees of root resorption were observed despite comparable degrees of orthodontic movement in the bilateral maxillary central incisors, suggest that the incisive canal could be an inducing factor for root resorption. However, further investigation is necessary to confirm this assumption.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.2
• /
• pp.311-316
• /
• 2006

A scissors bite in the posterior teeth occurs when the upper teeth are positioned totally or unilaterally buccal to the lower teeth in centric occlusion. This malocclusion can result from either excessive width of maxilla, deficient width mandible, or combination of both. The malocclusion can lead to hindered growth of jaws or to asymmetry between the jaws, Besides, the severe lingual inclination of the mandibular posterior teeth prevents adequate mastication. Thus, the scissors bite is in need of immediate interceptive orthodontic intervention. The common treatments of the scissors bite is to expand the mandibular arch: fixed or removable appliances. In our clinic, we made a success in treatment of the scissors bite using the Schwarz appliance. We treated the scissors bite using the lower Schwarz appliance for a mean observation period of 21 months. The subjects were 2 boys, aged 4 years.

• Archives of Craniofacial Surgery
• /
• v.15 no.2
• /
• pp.53-58
• /
• 2014

Background: Maxillomandibular fixation (MMF) is usually used to treat double mandibular fractures. However, advancements in reduction and fixation techniques may allow recovery of the premorbid dental arch and occlusion without the use of MMF. We investigated whether anatomical reduction and microplate fixation without MMF could provide secure immobilization and correct occlusion in double mandibular fractures. Methods: Thirty-four patients with double mandibular fractures were treated with open reduction and internal fixation without MMF. Both fracture sites were surgically treated. For bony fixations, we used microplates with or without wire. After reduction, each fracture site was fixed at two or three points to maintain anatomical alignment of the mandible. Interdental wiring was used to reduce the fracture at the superior border and to enhance stability for 6 weeks. Mouth opening was permitted immediately. Results: No major complications were observed, including infection, plate exposure, non-union, or significant malocclusion. Five patients experienced minor complications, among whom the only one patient experienced a persistant but mild malocclusion with no need for additional management. Conclusion: This study showed that double mandibular fractures correction with two-or three-point fixation without MMF simplified the surgical procedure, increased patient comfort, and reduced complications, due to good stability and excellent adaptation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.3
• /
• pp.291-299
• /
• 1991

We retrospectively reviewed 334 inpatients who sustained a total of 518 mandibular fractures and who ewer treated in our department between l980-1990. This results were obtained as follows : 1. In respect of incidence, there were the highest frequency in July, and the lowest frequency in May. The number of patients has not been increased year after year due to competition with other department in our hospital. 2. The age frequency was the highest in the 2nd decade(38.9%) and the ratio of man to women was 4.9 : 1. 3. The most frequent cause of mandibular fracture was traffic accident(43.4%), and the next was fall down(24.3%), fist blow(71%), industrial accident(21%) and others in order. In the traffic accident, autobicycle accident was 14.1%. 4. The most common location of mandibular fracture was symphysis(38.8%), condyle(20.7% ), angle(19.9%) and body(15.1%) were next in order of frequency. The classification by location of fracture, the frequency of single fracture was 54.8%. 5. In 334 patients of mandibular fracture, the frequency of associated injuries was facial laceration(58.4%), teeth injuries(37.7%), extremity injuries(13.2%) were next in order of frequency. 6. The patients arrived in hospital immediately within 24 hours after accident wee 61.4% of all. In respect of treatment, open reduction was 68.7% of all. 7. Complications including infection were present 11.1% of patient. Other complications inclued delayed healing malocclusion, malocclusion and neurologic problem.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.1
• /
• pp.91-96
• /
• 2007

Amelogenesis imperfecta (AI) is a hereditary disease that affects enamel formation. The patients with AI have esthetic and functional problems due to damage of multiple teeth. So most AI patients resolve these problem through the conservative and prosthodontic treatments. In our case, It was difficult to obtain good results in means of conservative and prosthodontic treatments, because the AI patient had skeletal Class III malocclusion. Moreover, because of vertical dimension loss due to severe dental caries and maxillofacial skeletal disharmony, the ordinary prosthodontic treatment was troublesome. So we planned orthognathic surgery to resolve these problems. After the endodontic treatment, temporary restoration was delivered for stable post-operative occlusion. Then orthognathic surgery was done, and final restoration was delivered in stable period. We obtained satisfactory results in esthetic and functional aspects through multidisciplinary management(conservative treatment, prosthodontics and orthognathic surgery).

• The korean journal of orthodontics
• /
• v.49 no.3
• /
• pp.161-169
• /
• 2019

Objective: To evaluate the effectiveness of the Frog appliance in three dimensions by using cone-beam computed tomography (CBCT) images. Methods: Forty patients (21 boys and 19 girls), averaged 11.7 years old, with an Angle Class II division 1 malocclusion were included in our study. They had either late mixed dentition or early permanent dentition, and the maxillary second molars had not yet erupted. All patients underwent CBCT before and after the treatment for measuring changes in the maxillary first molars, second premolars, central incisors, and profile. Paired-samples t-test was used to compare the mean difference in each variable before treatment and after the first phase of treatment. Results: The maxillary first molars were effectively distalized by 4.25 mm (p < 0.001) and 3.53 mm (p < 0.05) in the dental crown and root apex, respectively. The tipping increased by $2.25^{\circ}$, but the difference was not significant. Moreover the teeth moved buccally by 0.84 mm (p < 0.05) and 2.87 mm (p < 0.01) in the mesiobuccal and distobuccal cusps, respectively, whereas no significant changes occurred in the root apex. Regarding the anchorage parts, the angle of the maxillary central incisor's long axis to the sella-nasion plane increased by $2.76^{\circ}$ (p < 0.05) and the distance from the upper lip to the esthetic plane decreased by 0.52 mm (p = 0.01). Conclusions: The Frog appliance effectively distalized the maxillary molars with an acceptable degree of tipping, distobuccal rotation, and buccal crown torque, with only slight anchorage loss. Furthermore, CBCT image demonstrated that it is a simple and reliable method for three-dimensional analysis.

• The korean journal of orthodontics
• /
• v.49 no.3
• /
• pp.170-180
• /
• 2019

Objective: The purpose of this study was to investigate the relationship between the facial skeletal patterns and the shape of the mandibular symphysis in adults with malocclusion by using a structural equation model (SEM). Methods: Ninety adults who had malocclusion and had records of facial skeletal measurements performed using cone-beam computed tomography were selected for this study. The skeletal measurements were classified into three groups (vertical, anteroposterior, and transverse). Cross-sectional images of the mandibular symphysis were analyzed using generalized Procrustes and principal component (PC) analyses. A SEM was constructed after the factors were extracted via factor analysis. Results: Two factors were extracted from the transverse, vertical, and anteroposterior skeletal measurements. Latent variables were extracted for each factor. PC1, PC2, and PC3 were selected to analyze the variations of the mandibular symphyseal shape. The SEM was constructed using the skeletal variables, PCs, and latent variables. The SEM showed that the vertical latent variable exerted the most influence on the mandibular symphyseal shape. Conclusions: The relationship between the skeletal pattern and the mandibular symphysis was analyzed using a SEM, which showed that the vertical facial skeletal pattern had the highest effect on the shape of the mandibular symphysis.