• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1993년도 제1차 학술발표초록집
• /
• pp.73-74
• /
• 1993

• 청정기술
• /
• 제19권4호
• /
• pp.393-400
• /
• 2013

본 연구에서는 고밀도 폴리에틸렌 제조 공정에서의 부산물인 폴리에틸렌 왁스를 대상으로 무수말레인산(MAH)을 도입하여 솔루션 그라프트 반응을 수행 하였고, 반응 효율에 영향을 끼치는 반응 인자들과 MAH 기능기의 가수분해의 영향에 대해서 조사하였다. 측정 결과, MAH 단량체의 농도가 증가 할수록 그라프트 율은 증가하지만, 전환율은 감소하여 MAH 단량체의 농도가 15 wt% 정도에서 최대 효율을 나타냄을 알 수 있었다. DCP (dicumyl peroxide)와 DTBP (di-tert-butyl peroxide)를 개시제로 사용하여 농도에 따라 그라프트 반응한 결과, 약 0.5 wt%에서 그라프트 율이 최대값에 도달함을 볼 수 있었고, 가교반응은 2% 이하의 낮은 수치를 보임을 확인하였다. 반응온도에 따른 그라프트 율은 반응온도가 높아짐에 따라 증가하는 경향을 보이며, 최대 반응시간은 2 h 내외가 됨을 알 수 있었다. 폴리에틸렌 왁스에 그라프트 된 MAH 기능기는 주로 고리열린 상태로 존재하지만 그라프트 율이 5%이상에서는 고리가 닫힌 상태가 생성되었고, 이에 대한 가수분해 측정결과, 언하이드라이드(anhydride)기가 카르복실(carboxylic acid)기로 전환되는 율이 약 10% 정도로 측정되어, 저분자량 폴리에틸렌 왁스(polyethylene wax, PEW)-g-MAH 물성에 영향을 주는 인자로 여겨졌다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.94-99
• /
• 1995

Naphthalene sulfonated condensatd(NSF) has been widely using for the superplasticizing of ement and concrete. But NSF has a very large mobility loss with elapsed tiom. To retain mobility of NSF during a certain time, maleic anhydride and acrylic acid copolymer(MA) was polymerized and mixed with NSF in order to perpare admixture holding mobility-retention property of cement. By applying this admixture for ement paste, we examined the fluidity and mobility retention property as a function to elapsed time and measured the compressive strength of mortar with curing time. As a result, NSF containing 20wt% of MA showed very excellent fluidity and mobility-retention property. These properties were affected by the added amount of admixture and the ratio of water to cement.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.211-214
• /
• 1998

DC breakdown characteristics and formation of space charge at the interfaces of crosslinked polyethylene (XLPE) /ethylene propylene diene terpolymer (EPDM) laminates were studied. Effects of silicone grease and some chemicals such as crosslinking coagent on the interfacial charge were also studied. Interfacial charge develops at the interface of XLPE/EPDM laminates, which changes depending on heat treatment conditions and types of chemicals coated at the interface. Some chemicals such as maleic anhydride reduce the accumulation of interfacial charge in the XLPE/EPDM laminates. Breakdown strength of EPDM/XLPE laminate through the interface was highest when silicone oil was pasted in the interfaces. Interfacial breakdown strength decreased with the increase of MAH content.

• Elastomers and Composites
• /
• 제18권4호
• /
• pp.135-139
• /
• 1983

Scanning electron microscopy studies were conducted to examine the surface treatment effects of treating agents the proposed in the previous studies on various vulcanizates. Fracture surfaces of the vulcanizates compounded with kaolin treated with sodium polyphosphate of poly(maleic anhydride) presented favorable results as expected from the results of the previous studies. In other words, treating agents such as sodium polyphosphate and poly(maleic anhydride) show considerable reinforcing effects on the vulcanizates.

• 대한화학회지
• /
• 제16권3호
• /
• pp.142-148
• /
• 1972

IMO 이론을 naphthalene, phenanthrene 및 1,2-benzanthracene 과 maleic anhydride 와의 Diels-Alder 반응에 적용하였다. Alternant hydrocarbon 에서 열적 부과반응이 일어 나리라 예상되는 위치가 실험결과와 잘 일치하였다. 계산된 안정화 에너지로부터 부가생성률 중의 이성체들의 상대적양이 설명되었으며 또 Brown 의 paralocalization 에너지와 안정화에너지 사이에 좋은 직전성이 있음을 알았다.

• Elastomers and Composites
• /
• 제51권3호
• /
• pp.233-239
• /
• 2016

Polyethylene (PE) and maleic anhydride-grafted PE (PE-g-MAH) were pyrolyzed, and their pyrolysis products were analyzed using gas chromatography/mass spectrometry (GC/MS) to investigate the influence of MAH grafted onto PE on pyrolysis behaviors. Major pyrolysis products of PE and PE-g-MAH were n-alkanes, 1-alkenes, ${\alpha},{\omega}$-alkadienes, and aromatic compounds. 1-Alkenes were more formed than n-alkanes, ${\alpha},{\omega}$-alkadienes, and aromatic compounds. Butadiene was more produced from PE than PE-g-MAH, whereas toluene and ethyl benzene were more generated from PE-g-MAH than PE. Difference in the pyrolysis behaviors between PE and PE-g-MAH were explained by initial decomposition of MAH moiety.

• Elastomers and Composites
• /
• 제52권1호
• /
• pp.59-68
• /
• 2017

The effect on the hydrolysis resistance properties by the addition of maleic anhydride grafted EMDM (MA-g-EPDM) and PP (MA-g-PP) to a PA66/GF composite was investigated with respect to the mechanical properties, thermal properties, and morphology. The degree of hydrolysis of the PA66/GF composite was measured using py-GC/MS analysis. When compared to the PA66/GFcomposite in MEG/water solution, the composites where MA-g-EPDM and MA-g-PP were added to PA66/GF showed a higher degree of hydrolysis resistance, impact strength, and thermal properties, whereas their tensile strength, tensile modulus, flexural strength and flexural modulus decreased. As immersion time in the solution increases, the rate of tensile strength drop of the MA-g-PP added composite appeared lower than that of the PA66/MA-g-EPDM/GF and PA66/GF composites. The py-GC/MS analysis confirmed the formation of PA66 hydrolysis reaction by products such as carboxylic acid and alkylamine with increasing immersion time.

• Korea-Australia Rheology Journal
• /
• 제19권3호
• /
• pp.133-139
• /
• 2007

Low density polyethylene nanocomposites were prepared by melt intercalating maleic anhydride grafted polyethylene and montmorillonite clay. It has been found that maleic anhydride has promoted strong interactions between polyethylene and montmorillonite, leading to the homogeneous dispersion of clay layers. Rheological experiments revealed that prepared nanocomposites exhibited shear thinning behaviour. Polyethylene nanocomposites exhibited an increase in steady shear viscosities compared to virgin polyethylene owing to strong polymer clay interactions. The tensile strength of nanocomposites was improved but elongation at break decreased considerably. Also, barrier properties improved significantly with montmorillonite content.

• Elastomers and Composites
• /
• 제51권2호
• /
• pp.106-112
• /
• 2016

Maleimidopropyltriethoxysilane grafted natural rubber (MISNR) was prepared by reaction of maleic anhydride grafted natural rubber and 3-aminopropyl triethoxysilane. MISNR was used as the compatibilizer of natural rubber/silica composites. The composites were prepared by two-step mixing procedures. The final mixtures were cured with optimum cure condition, which was established by a rheometer. Effects of the amounts of compatibilizer in the composites on the cure characteristics, morphology, thermal stability, and physical and mechanical behaviors were investigated. The composites having MISNR had shown cure characteristics and physical and mechanical properties superior to those without MISNR. Silica particles in the former appeared to be more uniform and reduced in size compared with the latter. The effects of the types of silica were also evaluated.