• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.291-292
• /
• 2006

Currently A demand of high precision workpiece is increasing in industry. At present, roundness measuring machine using Air bearing, coordinate measuring machine that are used from measurement station. but these machines will not be able to apply to In-line process. because of like these machine's price are very expensive and measurement time is long. also, the complexity of conventional roundness measurement method based on fourier transform, it makes difficult to development analysis program. This work present new architecture of a Out-diameter measuring system fur analysis of roundness of product. In this system, the influence of table motion errors is minimize by using two LVDT sensor and knife edge contact tip. We are produce a test machine and make an experimenter on Out-diameter of test bearing. The measurement result compared with roundness measuring machine.

• Journal of the Korean Society of Safety
• /
• v.11 no.1
• /
• pp.121-128
• /
• 1996

Estimating the cost of injuries and "accidents" to an organization is very important to figure out about how much well each organization has run his company and how much efficiently he has got the results using a certain amount of the expense for safety. Despite the potential usefulness to management of information as to the cost of a company's "accidents", it is not customary accounting practice to make these data available. Of the two general kinds of costs forced on a company by its occupational injuries and "accidents", the insurance cost and uninsured cost, -the former is by far the easier to find out. But actually, this uninsured cost should be figured out at each company. Authors have designed the generalized model to figure out the above problem costs to establish its efficient safety control. One construction company has been a pilot for this study. It is found that efficient safety control cost should be 1.2%~l.3% of total selling amount by analyzing actual data for three years.g actual data for three years.

• Journal of Acupuncture Research
• /
• v.21 no.1
• /
• pp.119-135
• /
• 2004

Objective: The purpose of this study is to investigate the mechanism and effect of moxibustion with salt objectively, to be used as the quantitative data through the measurement of temperature, and to grasp the thermodynamic characteristics of moxibustion with salt. Methods: We have selected of the moxibustion with salt of indirect moxibustion. We make a comparative study of the thermodynamic characteristics of moxibustion with salt as a kind of the 4 salt. We examined combustion times, temperatures, temperature gradients in each period during a combustion of moxa. Results: 1. We make out that it is not significantly change the time of thermal conduction of moxibustion with salt as a kind of 4 salt. 2. The heating period of Refined Salt was long and that of Sun-dried Salt was a short time respectively. The heating period of maximum tamperature is high Sun-dried Salt, Mechanical Salt and Refined Salt orderly. Maximun heating speed in the heating period was $0.151{\sim}0.184^{\circ}C/sec$ and at the same tendency of the maximum temperature in the heating period. 3. The retaining period was shorter than the heating period respectively, that is 15~24% of the combustion time of in the heating period. We make out that it is not significantly different the time of the retaining period as a kind of 4 salt. The mean temperature of retaining period was $43.2{\sim}48.1^{\circ}C$, that was extraordinarily high temperature. 4. We make out that it is not significantly different the time of the cooling period as a kind of 4 salt. The cooling period was measured 223~233sec. Beacuse the same density and size of moxa combustion was made an experiment. 5. The effective combustion time of Refined Salt is longer(259sec) than that of Sun-dried Salt(173sec). It is significantly different the time of the combustion time as a kind of 4 salt. 6. It is significantly different the Sample deviation of the combustion time as a kind of 4 salt because of the water content of the 4 salt individually. Conclusions: As the base on this study, we obtained the conclusion as the follows. The salt of moxibustion with salt was fitted for Sun-dried Salt due to making to Mechanical Salt recently. The Refined Salt is composition rate to another and small size comparatively. So It was fitted for the salt of moxibustion with salt. It is necessary to study continuously about the more suitable moxibustion with salt and quantitative analysis about the moxibustion with salt.

• Journal of the Korean Magnetics Society
• /
• v.11 no.6
• /
• pp.278-284
• /
• 2001

Recently patented rights affect the competitive power of each country. Specially the situation of that country will be superiority if one country has lots of basic invention patents in advanced technology. In the near future, research results in universities or research institutes should be involved with patent application so that the investment of research funds improves our technology. Alloy is used to adjust magnetic characteristic in invention for magnetic recording medium. In this case there must be cautious in make out the patent claims of invention about such alloys. The patent for alloy invention is considered with following standard. (1) composition range and structure aspect according to the need of a composition metal (2)characteristics of the alloy and for use.

• Culinary science and hospitality research
• /
• v.11 no.4 s.27
• /
• pp.102-117
• /
• 2005

It was maintained that successful establishment and accomplishment of outsourcing might be possible only when those eating-out companies re-establish their concept of management strategy, identify core competencies through value-chain analysis, make a through cost analysis, select cooperative companies via overall screening, expand the area of outsourcing, enhance partnership to improve service quality, harmonize bilateral organization culture, remove the ambiguity of contract terms, protect core competencies of the rest area, continue with evaluation and control, and spinoff or invest to a new specialized business. Then, it was suggested that highway rest area business construct the core competencies and introduce outsourcing from a future-oriented viewpoint so that they can concentrate the competencies to competitive area and expand outsourcing scope to professional area such as finance and accounting, general affairs, personnel affairs, logistics, marketing, and R&D. They need to make out the problem of productivity reduction resulted from many years working employee's old age, refine human resource, and maintain the standards of skill so that they can improve service quality of the rest area, streamline each organization currently having so a large manpower, reduce manpower, and improve the productivity.

• Journal of the Korean Society of Safety
• /
• v.19 no.2
• /
• pp.125-129
• /
• 2004

In masive concrete placement, cracking problem due to hydration heat is frequently encountered. One of measure to solve this problem is to make a construction joint. However, it is cumbersome to make it by chipping the surface of joint. In this study, push-out test for 18 specimens was conducted to compare the interface shear strength of consturction joints whose surfaces were prepared with three methods; chipping, rib-lath, folded rib-lath. Compared to the specimens made with conventional surface chipping, those with rib-lathe showd excellent preformance increasing shear resistance capacity and the role of shear key conceived by folding rib-lath played important role in enhancing shear resistance.

• Journal of Applied Reliability
• /
• v.16 no.2
• /
• pp.134-146
• /
• 2016

Purpose: Many domestic companies have to make out quantitative evaluation table in their proposal when they conduct the software R&D project. However, most of companies have a difficulty to select the evaluation items and criteria, also to derive a quantitative results. Therefore, we propose a method to derive the quantitative evaluation index by utilizing the ISO/IEC 9126-2. Methods: Analyzing ISO/IEC 9126-2, and we classify the quality metrics as high-classification and sub-classification for Web/App software, Embedded software and Installation software. Next, Conduct the metrics selection survey depending on importance and necessity. Then, carry out the case study. Verify the correspondence between evaluation items and criteria from original suggestion of company and from outcome by utilizing the ISO/IEC 9126-2 quality metrics. Results: It is possible to classify into two metrics, one for common software or one another for only special software. Furthermore, there is quality metrics that is more important and more necessary depending upon characteristics of the software. Conclusion: ISO/IEC 9126-2 quality metrics can be used to make an evaluation items and criteria for quantitative evaluation table of software product.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.91-94
• /
• 2004

Preform design techniques have been investigated in efforts to reduce die wear and forming load and to improve material flow, filing ratio, etc. In hot forging processes, a thin deformed part of a workpiece, known as a flash, is formed in the narrow gap between the upper and lower tools. Although designers make tools that generate a flash intentionally in order to improve flow properties, excessive flash increases die wear and forming load. Therefore, it is necessary to make a preform shape that can reduce the excessive flash without changing flow properties. In this paper, a new preform design technique is proposed to reduce the excessive flash in a metal forging process. After a finite element simulation of the process is carried out with an initial billet, the flow of material in the flash region is traced from the final shape to the initial billet. The region belonging to the flash is then easily found in the initial billet. The finite element simulation is then carried out again with the modified billet from which the selected region has been removed. In several iterations of this technique, the optimal preform shape that minimizes the amount of flash without changing the forgeability can be obtained.

• Journal of the Korean Institute of Navigation
• /
• v.17 no.2
• /
• pp.57-73
• /
• 1993

Subject : The Practical Use of UN Standard Message for cargo flow EDI Writer : Park, Nam Kyu and Lee, Tae Woo It's necessary to prepare standard message which is agreed on among trading partners for EDI in container transport industry. Now KMPA is carrying out the EDI Project for establishing Korea Logistics Network. It is important to make standard message of documents using in transport industry to succesfully accomodate EDI. The objective of this study is to find out the method of UN standard message utility in Korea. For this study, the UN message guideline is primarily reviewed, and the process that Shipping Request being used in Hanjin Shipping Co. Ltd. is applied to UNSMs as case study. Generally the data format of EDIFACT is so complex and broad for inter-industry standard that the abstract of data format is usually used. Therefore, it is necessary to make the subset of standard message for Shipping Request in ocean industry. In the result of this study, that the ocean industry can use the subset of IFTMBF for Shipping Request is proved, and the subset is suggested. This thesis will contribute toward showing the practical way of standardrization of 350 documents using in trade, customs and transport sectors.

• KIEAE Journal
• /
• v.6 no.4
• /
• pp.11-16
• /
• 2006

This work has carried out some preliminary studies for the utilization of a solar mini-dish system capable of concentrating solar rays to higher densities. A typical mini-dish system considered employs an array of solar mini-dishes where major components are light and compact. It consists of small mini-dishes, optical fiber bundles and diffusers at the end. Each mini-dish (typically has a 20 to 30 cm in diameter) is designed with a simple parabolic profile, concentrating sunlight (after the glass glazing cover to avoid dust deposition on the reflector and facilitate cleaning) onto a centrally-located small mirror which is placed on the bottom side of the transparent glass cover. The focused sunlight is reflected by the mirror surface onto a focal point where the receiving aperture of a homogenizer is located. Optical fibers are used to carry high-density solar rays to the other end where diffusers are mounted for indoor illumination. The proposed high density mini-dish system could make an efficient daylighting system as it excludes large moving parts and expandable if necessary. Each component of the system could be made from the off-the-shelf technology and thus, make the generic unit inexpensive to manufacture. Depending on spatial demand or characteristics, the amount of introducing daylight could be controlled. Preliminary tests have been carried out for a trial system to check any functional problems when in operation. Suggestions are also made to improve the design enhancing its performance and applicability.