• 한국주거학회논문집
• /
• 제23권2호
• /
• pp.89-98
• /
• 2012

As the construction of multi-family housings, especially apartments, has been increased since 1970s, the multi-family housing becomes one of the main housing types in Korea. With the increase of multi-family housings, managing them becomes an important issue. Since 2010, the government has made a lowest price award system by a competitive bid compulsory to promote the development of housing management systems. Although competitive bids were implemented, the maintenance company was finally selected by the price without any other consideration. Consequently, the quality of management service was not enhanced. The purpose of this study is to suggest the improvement scheme of multi-family housing management system. In this study, the bidding data of "K-apt", the bidding method and the successful tendered price are analyzed. The results of analyzing bidding materials, the proportion of applying a lowest price system was 67.7%. Also many diverse ways to select the best management company were used, but most of these ways were violate the law and guidelines of Ministry of Land, Transport and Maritime Affairs. It meant that the lowest price award system was not implemented by strict standards and didn't correspond with the needs of residents of apartment. This condition made the housing maintenance quality low and deteriorated the management industry development. To enhance this condition, a new standard to select the management company, which are included contents of quality of managing quality, management expenses and companies' soundness, is necessary.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권3호
• /
• pp.138-144
• /
• 2017

전 세계 적으로 이산화탄소 배출 저감을 위한 노력으로 시멘트 산업에서는 비소성 결합재인 석회석을 시멘트에 첨가하여 콘크리트를 제조하고 있다. 특히, 유럽에서는 석회석을 시멘트의 35%까지 치환하여 사용하기도 한다. 국내에서는 2013년에 KS L 5201을 개정하여 석회석을 보통 포틀랜드 시멘트에 5%까지 혼합하여 사용할 수 있도록 하였으며, 아직 석회석 혼합 시멘트에 대한 규격은 전무한 상태이다. 본 연구에서는 비소성 결합재인 석회석을 활용하여, 석회석 혼입량에 따른 콘크리트의 역학적 특성 및 내구특성에 대한 영향을 살펴보았다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권5호통권57호
• /
• pp.133-141
• /
• 2009

50년 이상 경과된 조적조 건축물은 석회모르타르로 시공되었으나 보수공사 시 시멘트모르타르를 사용하여 기존 재료와의 상이함으로 인한 문제가 다수 발생하였다. 또한, 조적조 건축물의 보수공사 시 참고할 수 있는 석회모르타르에 대한 객관화된 자료의 부족과 상세기준이 없으며, 미숙련 조적공의 시공으로 인하여 건축물의 객관적인 구조성능을 평가하기가 어렵다. 조적조 건축물의 원형을 보존하기 위해서는 해당 건물의 재료와 기법에 대한 기술사적 연구가 중요하다. 그러므로 본 연구는 석회모르타르의 배합비, 배합재료, 양생기간 및 조건 등에 따른 압축강도 실험을 행하고, 이를 토대로 시멘트모르타르와 석회모르타르를 비교분석하여 석회모르타르의 구조적 특성을 정리한다.

• Structural Monitoring and Maintenance
• /
• 제2권1호
• /
• pp.35-48
• /
• 2015

The main objective of this study is to evaluate the long-term performance of various concrete composites in natural marine environment prevailing in the Gulf region. Durability assessment studies of such nature are usually carried out under aggressive environments that constitute seawater, chloride and sulfate laden soils and wind, and groundwater conditions. These studies are very vital for sustainable development of marine and off shore reinforced concrete structures of industrial design such as petroleum installations. First round of testing and evaluation, which is presented in this paper, were performed by standard tests under laboratory conditions. Laboratory results presented in this paper will be corroborated with test outcome of ongoing three years field exposure conditions. The field study will include different parameters of investigation for high performance concrete including corrosion inhibitors, type of reinforcement, natural and industrial pozzolanic additives, water to cement ratio, water type, cover thickness, curing conditions, and concrete coatings. Like the laboratory specimens, samples in the field will be monitored for corrosion induced deterioration signs and for any signs of failureover initial period ofthree years. In this paper, laboratory results pertaining to microsilica (SF), ground granulated blast furnace slag (GGBS), epoxy coated rebars and calcium nitrite corrosion inhibitor are very conclusive. Results affirmed that the supplementary cementing materials such as GGBS and SF significantly impacted and enhanced concrete resistivity to chloride ions penetration and hence decrease the corrosion activities on steel bars protected by such concretes. As for epoxy coated rebars applications under high chloride laden conditions, results showed great concern to integrity of the epoxy coating layer on the bar and its stability. On the other hand corrosion inhibiting admixtures such as calcium nitrite proved to be more effective when used in combination with the pozzolanic additives such as GGBS and microsilica.

• 한국산업융합학회 논문집
• /
• 제26권1호
• /
• pp.95-103
• /
• 2023

The domestic remanufacturing industry is concentrated in auto parts, so it is necessary to expand into various industries. In the domestic aluminum industry, the extrusion process accounts for more than 40% of the total, but the old and management of the extrusion equipment is not done properly. In particular, the extruder has a structure in which equipment is not replaced until major parts are damaged or worn, so there are problems such as lower process precision, productivity and production efficiency compared to new equipment, and high maintenance costs. In this study, the old extruder was remanufactured for major high-risk parts through Failure Mode and Effect Analysis(FMEA), and the process level and performance of the extruder were evaluated before and after remanufacturing. Compared to the existing extruder, the standard deviation of the remanufacture extruder was reduced by 93.5%, 57.9%, and 70.0%, respectively, in major process control items such as container temperature, billet temperature, and ram speed, keeping performance constant. In addition, it was possible to produce products with complex shapes that could not be produced before due to problems such as dimensional deviation within tolerances. In this study, remanufacturing guidelines were presented by analyzing the effect of failure modes of the old extruder, and the performance improvement of the extruder was confirmed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권3호
• /
• pp.103-110
• /
• 2019

다양한 원인에 의한 포장체에 손상이 발생하면 신속한 통행재개를 위한 급속보수가 필요하게 된다. 산화마그네슘인산염복합체의는 경화시간이 짧고, 조기 강도발현이 가능하여 급속보수재료로 적합한 특성을 갖고 있다. 연구에서는 경소마그네시아와 제1인산칼륨을 결합하여 보수재료로 개발하기 위하여 물-결합재(W/B)비, 마그네슘-인산염(M/P)비 등의 배합비를 조정하면서 경화와 강도특성을 평가하고자 하였다. 그리고 현장 적용시의 작업성을 확보하기 위하여 표준사와 일반모래에 따른 거동차이와 지연제별 특성을 평가하였다. 실험결과 물-결합재비는 35%내외와 마그네슘-인산염비는 1.0~1.2 내외가 강도측면에서 가장 적합한 것으로 분석되었다. W/B비 0.35, M/P비 1.2 변수에서 1일 강도 25.0MPa 이상 발현되어 조기 보수재료로서 활용가능성이 충분한 것으로 분석되었다. 작업시간 확보를 위해서는 붕산을 지연제로 사용하는 것이 적합한 것으로 나타났으며, 산화마그네슘의 순도는 90~95%내외가 경화시간 확보를 위해 효과적인 것으로 나타났다.

• 한국전통조경학회지
• /
• 제41권1호
• /
• pp.21-34
• /
• 2023

본 연구는 13개 마을 옛 담장의 국가등록문화재 지정 당시 사용된 재료와 축조법을 파악하고, 현장조사를 중심으로 정비에 따른 옛 담장의 구조별 변화 양상을 고찰하였다. 연구의 결과는 다음과 같다. 첫째, 옛 담장은 토석담 10개소와 돌담 5개소로 구성되었으며, 지정 당시 자연석 메쌓기로 막쌓은 돌담은 비슷한 형태를 유지하는 비율이 높았지만, 토석담은 사용한 돌과 줄눈 및 맞댄 면 축조법에 따라서 담장별로 다양하게 변형되었다. 둘째, 옛 담장의 정비로 인해서 변화된 구간을 추출하고 재료의 대체와 첨가, 축조법의 변형 양상을 파악하였다. 지붕부는 내구성과 가격의 효율이 높은 시멘트 기와나 석면 슬레이트로 대체되고, 우수 유입을 막고자 한식 기와에 와구토가 첨가되었다. 벽체부의 자연석은 시공 편의에 따른 발파석, 마름돌, 가공 석재로 대체되고, 보수에 시멘트 블록, 시멘트 벽돌이 사용되었으며, 시멘트 모르타르가 도포되었다. 토석담의 막쌓기가 빗쌓기로 변형되고 찰쌓기는 메쌓기로 바뀌어 경관적, 구조적 문제를 야기하였다. 또한 기초부에 시멘트 모르타르층이 시공되어 자연석 메쌓기로 유도했던 우수의 흐름을 막아버렸다. 셋째, 이러한 정비 양상은 주거공간에 배치된 옛 담장의 속성상 소유주가 일상적 훼손에 대한 비전문적 보수를 반복하고, 문화재 지정으로 인하여 정비를 담당한 수리업체가 지역 재료를 수급하기 어려우며, 옛 담장에 대한 차별성있는 수리시방서가 적용되지 않는 환경에서 기인한다고 판단된다.

• 한국기계가공학회지
• /
• 제13권5호
• /
• pp.21-27
• /
• 2014

Currently, wind power has become a major research field in the area of sustainable development. As one important component of a wind turbine transmission system, most instances of downtime due to a gearbox failure are caused by bearing failures. Gearboxes for wind turbines must have the highest levels of reliability over a period of approximately 20 years, withstanding high dynamic loads. At the same time, a lightweight design and cost minimization efforts are required. These demands can only be met with a well-thought-out design, high-quality materials, a high production quality and proper maintenance. In order to design a reliable and lightweight gearbox, it is necessary to analyze methods pertaining to the bearing rating lifetimes of the standard and of different companies, also including calculation methods for modification factors. This can determine the influence of the bearing lifetime.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.113-117
• /
• 2005

The ceramic metal resin paints for waterproof and anti corrosion is not long history in development of materials even many actual result. So far, no standard have been given to construction and maintenance method, Quality and property, it is real state that cannot afford to proper quality control in job site or production. This study has been test for the ceramic metal resin paints for water and anti corrosion, as the result, it have proper performance of job site and mechanical performance of compare to other existing. In particular, tensile strength indicates more high about $14.1N/mm^2$ than epoxy resin paints, and in elongation per unit length is more high It is shows having better adhesive strength than epoxy resin paint for crack on the concrete structure. Moreover, The ceramic metal paint for water and corrosion proofing have to have main performance is watertightness and resistance for external impact, chloride ion permeation, drinkable water elution.

• 한국농공학회논문집
• /
• 제48권6호
• /
• pp.113-124
• /
• 2006

The feasibility of the up- and down-flow constructed wetland was examined fur rural wastewater treatment in Korea. Many constructed wetland process was suffered from substrate clogging and high plant stresses because of long term operation. The up- and down-flow constructed wetland process used porous granule materials (charcoal pumice : SSR=10:20:70) for promoting intake rate of nutrient to plant, and especially flow type was designed continuously repeating from up-flow to down-flow. $BOD_5$ and SS was removed effectively by the process with the average removal rate being about 75% respectively. The wetland process was effective in treating nutrient as well as organic pollutant. Removal of TN and TP were more effective than other wetland system and mean effluent concentrations were approximately 7.5 and $0.4mg\;L^{-1}$ which satisfied the water quality standard for WWTPs. The treatment system did not experience any clogging or accumulations of pollutants and reduction of treatment efficiency during winter period because constructed polycarbonate glass structure prevented temperature drop. Considering stable performance and effective removal of pollutant in wastewater, low maintenance, and cost-effectiveness, the up- and down-flow constructed wetland was thought to be an effective and feasible alternative in rural area.