• KIEAE Journal
• /
• v.14 no.5
• /
• pp.5-12
• /
• 2014

Building has been deteriorated gradually owing to geographic, physical complex and other factors. School living condition has a key role to improve the learning ability, life attitude and qualifications to adopt to social life. Therefore, it is important for school environment to keep the living condition. Repair time and scope of school facilities are required to maintain the function and performance to plan the long term repair. But there are little information about the school maintenance such as repair time and function. In this paper, it aimed at providing the service life to suggest the repair time and scope in the roof-proofing and floor finishing which used the three estimation method in probabilistic approach. The service life has a key role to decide the repair time and to make the plan for the repair maintenance. Results of this study are as follows ; First, the 1st repair time were taken through three methods in probabilistic and deterministic functions to eliminate the estimation bias. Second, the service life is suggested 36 years of an elementary school, 34 years of a middle school and 41 years of a high school. Third, the service life of a floor finishing is 43 years of an elementary, 39 years of a middle school and 41 years of a high school. The above study could not include the detailed information about the materials and repair works. Therefore it needs a further study to reflect the detailed information and to make a repair strategy.

• Nuclear Engineering and Technology
• /
• v.56 no.4
• /
• pp.1472-1479
• /
• 2024

Cyber-Physical Energy Systems (CPESs) integrate cyber and hardware components to ensure a reliable and safe physical power production and supply. Renewable Energy Sources (RESs) add uncertainty to energy demand that can be dealt with flexible operation (e.g., load-following) of CPES; at the same time, scenarios that could result in severe consequences due to both component stochastic failures and aging of the cyber system of CPES (commonly overlooked) must be accounted for Operation & Maintenance (O&M) planning. In this paper, we make use of Deep Reinforcement Learning (DRL) to search for the optimal O&M strategy that, not only considers the actual system hardware components health conditions and their Remaining Useful Life (RUL), but also the possible accident scenarios caused by the failures and the aging of the hardware and the cyber components, respectively. The novelty of the work lies in embedding the cyber aging model into the CPES model of production planning and failure process; this model is used to help the RL agent, trained with Proximal Policy Optimization (PPO) and Imitation Learning (IL), finding the proper rejuvenation timing for the cyber system accounting for the uncertainty of the cyber system aging process. An application is provided, with regards to the Advanced Lead-cooled Fast Reactor European Demonstrator (ALFRED).

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.7 no.3
• /
• pp.171-177
• /
• 2002

The metabolic flux pattern for L-histidine production was analyzed when glucose and/or acetate were used as carbon sources. Total L-histidine production was enhanced when mixed substrate (glucose and acetate) was used, compared wish that when either glucose or acetate was used as the sole carbon source. Theoretical maximum carbon fluxes through the main pathways for L-histldine production, cell growth, and ATP consumption for cell maintenance were obtained by the linear programming (LP) method. By comparison of the theoretical maximum carbon fluxes tilth actual ones, it was found that a large amount of glucose was actually used for maintenance of cell viability. On the other hand, acetate was used for cell growth. After depletion of acetate in the mixed substrate culture, the flux for glucose to L-histldine synthesis was markedly enhanced. A strategy for effective L-histidine production using both carbon sources was proposed.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.847-852
• /
• 2004

The virtual engineering technologies have been broadly used for the design, testing, manufacturing and maintenance works of industrial product. Recently many VR systems with walk through navigation and web databases; such as design and installation database. load history database, maintenance history database et al. are developed. However, the virtual engineering in railroad industry is not well developed compared to other industries like automobile, air, shipbuilding. In this paper, we explain the strategy that we have applied the virtual engineering technology to the design works of rolling stock and our plan to build the virtual testing laboratory(VTL) in the Korea Railroad Research Institute.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.277-278
• /
• 2009

The building that supply tidal and splash zone was constructed near Seamangeum Gate Bridge. The specimens that will be tested for maintenance of gate bridge were exposed on the tidal and splash zone, totally about 650(Fig. 1). The characteristics of strength, salt penetration profile, field application of surface repair material and section recover material will be acquired by periodical test. The program was developed to obtain optimal maintenance strategy of gate bridge as a marine concrete structure and to deposit experimental data, lab. test result, field test result, on its D/B. On this paper, we hope to introduce two years exposure data as compressive strength, the modulus of elasticity, the modulus of dynamic elasticity, field adoption of repair and recover materials. As briefly speaking the results, possion's ratio, elasticity, strength was general, but the recover materials have some problems. There was crack between concrete and recover material and delamination figures.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.50 no.6
• /
• pp.61-71
• /
• 2008

An advanced model for assessing life cycle cost of the facility containing several subdivisions has been proposed with systems engineering approach. This model evaluates the maintenance cost in the sphere of the safety as well as in that of its functionality. The proposed approach has been shown to be more reasonable and practical than existing models. The serviceability and reasonability have been proved through evaluating life cycle cost of the reservoir which is a representative agricultural facility. In addition, the proposed method is helpful to make a maintenance strategy using the survival probability in the point of safety and functionality.

• Journal of Information Technology Applications and Management
• /
• v.10 no.1
• /
• pp.61-70
• /
• 2003

Many enterprises have implemented packaged enterprise resource planning (ERP) solutions rather than system development on the promises of feasible strategic benefits. Typical feasible benefits include adoption of global standards and processes through a proven integrated system, continuous version upgrading by vendors, and thus the easiness of system maintenance. The objectives of this research are to identify what makes a post-implementation success of ERP system and to figure out the critical issues and factors for the successful upgrade of packaged ERP systems. This case study was conducted based on five different organizations that have experienced system upgrade implementation. Success factors of ERP system upgrade include (1) clear statement of upgrade goals, (2) good coordination and communication among the implementation partners, (3) thorough management of customization and maintenance history including documentation, (4) Planning of system requirements of higher version, and (5) redefinition of role between business departments and IT department.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.2
• /
• pp.67-78
• /
• 2015

The purpose of the establishment of corporation's Business Continuity Plan(BCP) is to maintain corporations' own business and establish the response plan in order to resume operation in a short time period when crisis situations occur due to natural disaster and human error. This study has presented all types of procedures and criteria which are needed to establish the airport crisis response system in order to maintain the business continuity by utilizing BCP technique. Basically the risk response procedures must be established in the process of (1) preparation stage, (2) plan development stage, (3) documentation stage, (4) test & maintenance stage. The guideline has been suggested that each stage must be carried out in the sequence of Policy & Planning Responsibility, Business Impact Analysis, Recovery Strategy & Plans, Emergency Plan & SOP, Training Awareness and Maintenance & Review

• Journal of Aerospace System Engineering
• /
• v.8 no.4
• /
• pp.7-17
• /
• 2014

Objective of this paper is to introduce a new technology known as prognostics and health management (PHM) which enables a real-time life prediction for safety critical systems under extreme loading conditions. In the PHM, Bayesian framework is employed to account for uncertainties and probabilities arising in the overall process including condition monitoring, fault severity estimation and failure predictions. Three applications - aircraft fuselage crack, gearbox spall and battery capacity degradation are taken to illustrate the approach, in which the life is predicted and validated by end-of-life results. The PHM technology may allow new maintenance strategy that achieves higher degree of safety while reducing the cost in effective manner.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.493-496
• /
• 2008

In case of collapsed or damaged Servicing infrastructure, such as a bridge, tunnel, dam, a severe loss may have to be incurred. Therefore, infrastructure should not be designed and constructed properly but also maintained impeccably. This paper tried to build an intelligent bridge maintenance system that warn the people on bridge and control traffic in the danger. For the purpose, diverse wireless sensor fields are composed and structure's database is established. Also the paper develops a bridge maintenance program. Developed programme is regarded as a good tool to provide the utmost bridge management scenario, which is exactly correspondent with the demand and restraint by improving the present bridge management strategy.