• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.2
• /
• pp.267-275
• /
• 2023

As aged infrastructures have been increased, the importance of accurate maintenance costs and proper budget allocation for infrastructure become prominent under limited resources. This study proposed a mapping algorithm between representative defects, repair methods, and the estimated maintenance costs for concrete bridges. In this regard, using BMS (Bridge Management System) data analysis, bridge repair methods were classified and matched with defects according to their locations, types, and sizes. In addition, the maintenance costs were estimated based on the amount of work-load and quantity per unit using CSPR (Cost Standard Production Rate). As a result, the level of accuracy was an average of 85.1 % compared with the actual bill of quantity for Seoul bridge maintenance. The accuracy of maintenance costs is expected to be enhanced by considering the various site conditions such as pier height, extra charge conditions, additional equipment, etc.

• Journal of Cadastre & Land InformatiX
• /
• v.53 no.2
• /
• pp.39-52
• /
• 2023

Cadastral maps are important official documents that affect property rights and have experienced issues due to over 100 years of usage. The accuracy of these old cadastral maps has decreased due to damage, wear, and the accumulation of errors during the rewriting process. These errors have persisted into the digitalization process, creating difficulties in map management. A nationwide project to revise cadastral and forest maps is underway, but there are technical and legal challenges in making corrections. This study addresses the technical aspects of map maintenance and proposes a method to reduce errors and improve maintenance rates by preceding with boundary adjustments. The results show that by preceding with boundary adjustments, the average distance discrepancy decreases from 22.56cm to 8.12cm, and the maintenance rate increases by more than 10%.

• Journal of Sensor Science and Technology
• /
• v.1 no.1
• /
• pp.77-83
• /
• 1992

A primary standard of ac current at low frequency is derived from the standard of dc current by ac-dc transfer instrument. A set of 15 thermal current converters(TCCs) have been constructed as the primary current standards from 5 mA to 20 A at the frequency range of 10 Hz to 100 kHz. It is evaluated that the uncertainties for the maintenance and dissemination of ac current standard are less than 52 ppm up to 20 mA and 20 kHz, 60 ppm up to 100 mA and 20 kHz, and rising to 200 ppm at higher currents and frequencies.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.964-968
• /
• 2005

The standardization of information communication is doing a Internal each other connection and each other characteristic stability operation security in objective. From the low-speed network of the subway operation beginning currently it changes with the superhigh speed digital information transmission communication service environment which is a quality service, the hazard which plans the quality improvement of the efficient communication service use which hits to here and passenger service the standardization of the technical standard which stands and the improvement which hits to an engineering standard and facility must come to accomplish. The facility which existing is been old or the enclosure communication equipments which are insufficient. it improves, establishment itexpands efficiently, like this facilities it is stabilized and it is economic and rationally use maintenance it manages with the plan for the inside and outside of the country information communication relation technical standard and engineering standard service feature improvement and future expandability and economical efficiency, the possibility of having a pliability in order to be, rational technical standard and standard it takes a triangular position, efficient characteristic security of information communication service there is a place objective which promises the rational development of course city railroad communication system with character. Function improvement of enclosure communication base equipment, against an improvement and standardization plan it described trom the prosecution which it sees.

• Journal of Environmental Health Sciences
• /
• v.32 no.5 s.92
• /
• pp.387-397
• /
• 2006

This study was performed to investigate the characteristics of indoor air quality(IAQ) in 91 public facilities from September 2004 to March 2005 in the Honam province(Chonnam, Gwangju). The measured air pollutants are $PM_{10}$, formaldehyde(HCHO), CO, $CO_{2}$ and total suspended bacteria(TSB), the maintenance standard materials of IAQ management law established by ministry of environment in Korea(MOE). We also surveyed establishment and operation of ventilation equipment. It was measured $1.2m{\sim}1.5m$ on the floor between 8 o'clock AM and 7 o'clock PM. As the result, $PM_{10}$ and CO was showed the highest concentration, $188.89{\mu}g/m^{3}$, 8.67 ppm, at the indoor parking. The concentration of HCHO was the highest in large store and steamer room. The concentration was respectively $118.70{\mu}g/m^{3}\;and\;113.21{\mu}g/m^{3}$. The concentration of $CO_{2}$ was the highest at the reading room of the library on the condition of natural ventilation. The concentration of $CO_{2}$ was 1,816 ppm and higher than the IAQ standards established by MOE. The TSB was just measured in the hospital and silver town. It was the highest at the admission room of hospital. The concentration of TSB was $766CFU/m^{3}$. The public facilities of this study were not exceed each maintenance standards except $CO_{2}$ but it was surveyed that the management will be needed about some air pollutant according to target facilities.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.4
• /
• pp.79-91
• /
• 2008

Modern society as an information society, a lot of information is communicated in on-line. Specially, mobile environment based on radio communication has a characteristic of flexibility compared with wire communication and is developed rapidly. However, the more mobile technology is developed the more security for sensitive information is needed. Therefore, MTM(Mobile Trusted Module) is developed and promoted by TCG(Trusted Computing Group), which is an industry standard body to enhance the security level in the mobile computing environment. MTM, hardware security module for mobile environment, offers user's privacy protection, platform integrity verification, and individual platform attestation. On the other hand, secure migration scheme is required in case secret data or key is transferred from one platform to the other platform. In this paper, we analyze migration schemes which were described in TCG standard and other papers and then propose security maintenance scheme for secret data using USIM(Universal Subscriber Identity Module).

• Land and Housing Review
• /
• v.7 no.1
• /
• pp.43-51
• /
• 2016

The long-term repair program is significant as the execution standard for apartment in repair construction, and provides the basis for effective facility management through appropriation reserve and preventive maintenance. Considering its importance, the government legislates the items, cycle, and ratio for long-term repair. However, the frequent changes, controversies on repair, and difficulties in using appropriation reserve are caused as the items have not been revised on time reflecting up-to-date construction technologies. In order to resolve these problems, it is required to improve the standard by evaluating the appropriateness of repair items throughout the analysis of actual conditions. This study aims to suggest the revision plan for the criteria with the major items based on the status identified by the actual long-term repair programs and historical repair construction data. To do this, the adoption ratios of items to program are reviewed by collecting the real cases of the long-term repair programs. Developing improvement plan was approached in two ways such as "exclusion method" deleting minimum unnecessary items and "selection method" sorting out items with high adoption ratio and evidence of repair in a positive manner. Aa a result, the major items were identified as 118 items and 73 items by exclusion method and selection method respectively from the current 147 items. The outcomes of this study are expected to contribute enhancing the practicality of the standard in that the regulation for long-term repair program should periodically reflect the status of currently applied construction methods and materials.

• IE interfaces
• /
• v.23 no.3
• /
• pp.213-220
• /
• 2010

As the market becomes increasingly globalized and competition among companies increases in severity, various specialized organizations are participating across the process plant lifecycle, including the stages of design, construction, operation and maintenance, and dismantlement, in order to ensure efficiency and elevate competitiveness. In this regard, it is an important technical issue to develop services or information systems for sharing process plant data among participating organizations. ISO 15926 is an international standard for integration of lifecycle data for process plants including oil and gas facilities. ISO 15926 Part 7, a part of the ISO 15926 standard, specifies an implementation method called a facade that uses Web Services and ontology technologies for constructing plant data repositories and related services, with the aim of sharing lifecycle data of process plants. This paper discusses the ISO 15926-based prototype facade implemented for storing equipment data of nuclear power plants and servicing the data to interested organizations.

• International Journal of Highway Engineering
• /
• v.18 no.4
• /
• pp.63-68
• /
• 2016

PURPOSES : The nonlinear model of fatigue cracking is typically used for determining the maintenance period. However, this requires that the model parameters be known. In this study, the particle filter (PF) method was used to determine various statistical parameters such as the mean and standard deviation values for the nonlinear model of fatigue cracking. METHODS : The PF method was used to determine various statistical parameters for the nonlinear model of fatigue cracking, such as the mean and standard deviation. RESULTS : On comparing the values obtained using the PF method and the least square (LS) method, it was found that PF method was suitable for determining the statistical parameters to be used in the nonlinear model of fatigue cracking. CONCLUSIONS : The values obtained using the PF method were as accurate as those obtained using the LS method. Furthermore, reliability design can be applied because the statistical parameters of mean and standard deviation can be obtained through the PF method.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.3
• /
• pp.84-91
• /
• 2010

New aircraft category such as Light Sport Aircraft is introduced to prevent Ultralight Vehicle accidents and to promote aviation sports. Therefore, a new rule for airworthiness standard, certification, operation and maintenance of light sport aircraft is being created. The present study deals with LSA concept, development trend of LSA, airworthiness standards and certification policy. In particular, an aircraft type analysis of FAA certified LSA is conducted to establish performance requirements of Light Sport Aircraft designs.