• 한국안전학회지
• /
• 제10권4호
• /
• pp.87-96
• /
• 1995

It is only three(3) years since we applied brackets for scaffolding in the construction area. Unfortunately, there is no structural criteria on how to install those in the site so far, despite the fact that those brackets have been applied into the site by the firms already. It is shown that resistant capacity of each bracket type has been investigated, analyzed from this experimental study. Accident-concerning data on construction site analyzed by the Ministry of Labor, show temporary structure involves 18.6% of the total industrial accident, which the accidents from scafold-supporting brackets have rate of 42.5% of the ones occurred from the temporary structures. There are two main aspects to be observed : one is how much resistant capacity the brackets have themselves, the other is how exactly to install those without eccentricity. But practically, nobody does check of this bolt-installing conditions in the site and no check of tightening level of nut because there is no available tool to check torque amount for this kind of nut. We just have to rely on scaffolders experience of this tightening. This experiment involves just this variable of tightness at site. Eventually this insufficient tightness causes to collapse those scaffolding structures. The bracket might have less the one than its original capacity due to this insufficient tightness. Three(3) times of PIVOT tests show that fractured condition of two(2) row brackets has occurred mostly at lower bolt due to shear force. Therefore, tightness of bracket-installing bolt, tensile strength of the bolt, shear strength of the bolt, loading condition with equal two point or inequal two point loads, are mainly investigated as variables in this study.

• Journal of Crop Science and Biotechnology
• /
• 제10권4호
• /
• pp.223-230
• /
• 2007

Vitellaria paradoxa commonly called shea is an important agro forestry and fruit-bearing species present in four agro-ecological zones of Cameroon. The goal of this work was the morphological characterization of certain populations of V. paradoxa which will serve as a necessary step for a subsequent genetic study of the species. Morphological observations related to 20 agronomic traits, studied on 8-13 trees selected from each of the eight shea populations across four different agro-ecological zones located in four provinces of Cameroon were studied. The study showed that there was a variation between the populations, related to the traits measured on the trunk, fruit, nut, and leaf. Three shapes of the tree(ball, broom, and trained), five shapes of the fruit(round, oblong, reversed pear, ovoid, and oblong), three colors of the nut(clear brown, dark brown, and blackish brown) were identified. The principal component analysis(PCA) carried out on the quantitative characters revealed 72% of the total variance expressed on the first and second main axis. This variation was essentially explained by the traits measured on the fruits and on the nuts. The analyses showed that only the traits of the fruits and the nuts were discriminative. The shea populations studied were structured into two distinct groups using these discriminative traits.

• Coupled systems mechanics
• /
• 제6권2호
• /
• pp.175-187
• /
• 2017

This paper deals with a uniform cantilever Euler-Bernoulli beam subjected to follower and transversal force at its free end as a model for a pipe conveying fluid under electromagnetic damper force. The electromagnetic damper is composed of a permanent-magnet DC motor, a ball screw and a nut. The main objective of the current work is to reduce the pipe vibration resulting from the fluid velocity and allow it to transform into electric energy. To pursue this goal, the stability and vibration of the beam model was studied using Ritz and Newmark methods. It was observed that increasing the fluid velocity results in a decrease in the motion of the free end of the pipe. The results of simulation showed that the designed semiactive electromagnetic damper controlled by on-off damping control strategy decreased the vibration amplitude of the pipe about 5.9% and regenerated energy nearly 1.9 (mJ/s). It was also revealed that the designed semi-active electromagnetic damper has better performance and more energy regeneration than the passive electromagnetic damper.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.277-280
• /
• 1995

We had experiment using LB method that can fabricate molecular order ultra-thin film below 100${\AA}$. LB mettled has known as main technology of information society in 21C, because it is nut only free oriention and alignment of molecular but also ability of thickness control as molecular order. In this paper, the fabricated condition and physical properities of functional ultra-thin film of molecular order was investigated and highly efficient ultra-thin film capacitor was fabricated by using ultra-thin LB film for application as electronic device. Possibility of ultra-thin film capacitor was researched by analizing rind measuring electrical properties. Polyimide ultra-thin LB film capacitor was fabricated, ensured theoretically rind experimentally its possibility in range of 10Hz∼ 1MHz through its frequency characteristics.

• 대한기관식도과학회:학술대회논문집
• /
• 대한기관식도과학회 1982년도 제16차 학술대회연제순서 및 초록
• /
• pp.8.1-8
• /
• 1982

기도 이물은 이비인후와 영역에서 중요한 위치를 차지하고 있는 질환으로서, 타 질환에 비하여 그리 드문 것은 아니며 지금까지 국내외에서 많은 보고가 있어왔다. 기도 이물은 때로는 순식간에 생명을 위협하거나 중증의 합병증을 초래하기도 하며, 이물의 종류와 형태도 다양할 뿐 아니라 그 개재부위도 달라서 이물적출은 항상 낙관을 불허하는 것으로 수술적 방법을 요할때도 있다. 저자들은 최근에, 이물이 자연 객출된 1예와 기관지경술로 성공한 4예 및 외과적 수술로 제거한 2 예를 경험하였기에 문헌적 고찰과 함께 보고하는 바이다.

• 동력기계공학회지
• /
• 제15권4호
• /
• pp.19-24
• /
• 2011

The operational efficiency of domestic gas turbine is about 25% and it is now in the trend of the gradual growth in spite of the severe temperature, frequent starting and shutdown according to the environmental management and the energy-efficient use. Rotor bolts of gas turbine in power plants have been the cause of defects because these gas turbines have been operated for a long time under the high pressure and temperature environment experiencing the aging change and stress concentration of the bonded part. The connection parts of the bolt revealed various failure shape and these parts were elongated under very low pressure when operated in the relaxed condition. The cause is in the lack of the metal distribution in the bottle lack area and the cap screw of the bolt is broken totally in case that the nut is fastened in most cases. Gas turbine rotor bolts are connected to the rotor wheel and these bolts caused the vibration, the bulk accident of the rotor in the event that the coupling power among these bolts was relaxed. Therefore, we would like to evaluate the soundness of the main part of the gas turbine rotor bolt through the measurement of the inner condition change along with the mechanic deterioration and temperature, stress in the gas turbine rotor material.

• Smart Structures and Systems
• /
• 제13권3호
• /
• pp.419-434
• /
• 2014

In this paper, the electromagnetic damper (EMD), which is composed of a permanent-magnet rotary DC motor, a ball screw and a nut, is considered to be analyzed as a semi-active damper. The main objective pursued in the paper is to study the two degrees of freedom (DOF) model of the semi-active electromagnetic suspension system (SAEMSS) performance and energy regeneration controlled by on-off and continuous damping control strategies. The nonlinear equations of the SAEMSS must therefore be extracted. The effects of the EMD characteristics on ride comfort, handling performance and road holding for the passive electromagnetic suspension system (PEMSS) are first analyzed and damping control strategies effects on the SAEMSS performance and energy regeneration are investigated next. The results obtained from the simulation show that the SAEMSS provides better performance and more energy regeneration than the PEMSS. Moreover, the results reveal that the on-off hybrid control strategy leads to better performance in comparison with the continuous skyhook control strategy, however, the energy regeneration of the continuous skyhook control strategy is more than that of the on-off hybrid control strategy (except for on-off skyhook control strategy).

• 한국응용과학기술학회지
• /
• 제29권2호
• /
• pp.231-237
• /
• 2012

오미자 씨 오일의 화장품 소재로서 가능성을 평가하기 위해 GC와 GC/MSD를 사용하여 안정성 평가 및 성분 분석을 실시하였다. 그 결과 주요성분은 팔미틱산과 올레익산으로 나타났다. 오미자 씨 오일은 열에 의한 성분변화가 없고, 소재 자체의 안정성이 뛰어난 것으로 나타났다. 또한, DPPH(1,1-Diphenyl-2-picrylhydrazyl) 라디칼 소거능 실험을 통하여 항산화 효능을 측정한 결과 오미자 씨 오일이 마카다미아 오일과 올리브 오일에 비하여 높은 항산화 효능을 나타내었다. 콜라겐 합성능 또한 뛰어난 것으로 평가되었다. 따라서, 오미자 씨 오일은 화장품 소재용으로 유용하게 활용될 수 있는 가능성을 가진 것으로 평가되었다.

• 한국정밀공학회지
• /
• 제14권11호
• /
• pp.42-49
• /
• 1997

The extent of absorption and transmitance of the light that passes through some material is changed as the wavelength of the light varies, and which makdes it possible to estimate characteristics of the material. Spectrometer is a measurement system that can analyze the characteristics of material by using this principle. Its application field is so wide that it can be applied to all the arease that are concerned with analyzing materials : biological, environmental, medical and chemical area etc. This study is focused on developing precision sine drive mechanism for grating monochromator which is the most important part of the spectrometers. It is designed to be simple in struicture. It is achieved to derive basic principles to manipu- late precision sine drive mechanism : it should be aligned with a condition that .beta. , the angle between grat- ing normal and grating rod should be the same as .gamma. , the one between moving nut's normal and sliding guide. And also, it's found that the mis-alignments of the grating and mirrors are not the main factor in guaranteeing the linearity of sine drive mechanism. Performance evaluation is achieved by a standard sample by comparing experimental results with standard values. It results in wavelength accuracy of .+-. 0.5nm and resolution of 1nm. Conclusively, it can be verified that the sine drive mechanism developed in this study is not only simple in structure, but also stable and excellent in performanes.

• 한국표면공학회지
• /
• 제32권6호
• /
• pp.647-657
• /
• 1999

Due to the inherently poor adhesion strength of Cu-based leadframe/EMC (Epoxy Molding Compound) interface, popcorn cracking of thin plastic packages frequently occurs during the solder reflow process. In the present work, in order to enhance the adhesion strength of Cu-based leadframe/EMC interface, black-oxide layer was formed on the leadframe surface by chemical oxidation of leadframe, and then oxidized leadframe sheets were molded with EMC and machined to form SDCB (Sandwiched Double-Cantilever Beam) and SBN (Sandwiched Brazil-Nut) specimens. SDCB and SBN specimens were designed to measure the adhesion strength between leadframe and EMC in terms of critical energy-release rate under quasi-Mode I ($G_{IC}$ ) and mixed Mode loading ($G_{C}$ /) conditions, respectively. Results showed that black-oxide treatment of Cu-based leadframe initially introduced pebble-like X$C_2$O crystals with smooth facets on its surface, and after the full growth of $Cu_2$O layer, acicular CuO crystals were formed atop of the $Cu_2$O layer. According to the result of SDCB test, $Cu_2$O crystals on the leadframe surface did not increase ($G_{IC}$), however, acicular CuO crystals on the $Cu_2$O layer enhanced $G_{IC}$ considerably. The main reason for the adhesion improvement seems to be associated with the adhesion of CuO to EMC by mechanical interlocking mechanism. On the other hand, as the Mode II component increased, $G_{C}$ was increased, and when the phase angle was -34$^{\circ}$, crack Kinking into EMC was occured.d.