• Korean Chemical Engineering Research
• /
• 제47권4호
• /
• pp.470-475
• /
• 2009

본 연구에서는 유화중합을 이용한 수분산성 아크릴계접착제의 최적의 합성조건을 구하기 위하여 주단량체로 2-EHA(2-ethylhexyl acrylate), n-BA(n-butyl acrylate), MMA(methyl metacrylate), 기능성단량체로 2-HEMA(2-hydroxylethylmethacrylate), AAc(acrylic acid), 유화제로는 음이온성 유화제인 SLS(Sodium Lauryl Sulfate), 그리고 개시제로 APS(Ammonium persulfate)를 사용하여 전환율, 입자 크기, 박리강도, 유리전이온도에 대한 유화제, 개시제, 단량체 함량의 영향을 고찰하였다. 반응온도 $82^{\circ}C$, 유화제(SLS/monomer) 3.75%, 개시제(APS/monomer) 0.612%에서 95% 이상의 전환율을 얻을 수 있었고, 유화제나 개시제의 양이 너무 많을 때는 박리접착강도가 감소하는 경향을 보였으며, 65% 2-EHA/monomer, 20% BA/monomer, 10% MMA/monomer에서 최대 전환율과 최대 박리접착강도를 얻을 수 있었다.

• Macromolecular Research
• /
• 제12권5호
• /
• pp.519-527
• /
• 2004

Stable poly(methyl methacrylate-co-divinylbenzene) (poly(MMA-co-DVB)) microspheres were prepared by precipitation polymerization using acetonitrile as the main medium under various polymerization conditions, including modifications of the agitation speed, monomer and initiator concentrations, DVB content in the monomer mixture, and the use of various cosolvents. Gentle agitation was required to obtain smooth spherical particles. The individually stable microspheres were obtained at monomer concentrations of up to 15 vol% in an acetonitrile medium. The number-average diameter increased linearly with respect to increases in the monomer and initiator concentrations. We found, however, that the uniformity of the microspheres was independent of the variation of the polymerization ingredients because nuclei formation was solely influenced by the crosslinking reaction of the monomers. We obtained higher yields for the polymerization at higher concentrations of monomer and initiator. The concentration of DVB in the monomer mixture composition played an important role in determining not only the size of the microspheres but also the yield of the polymerization. In addition, although we employed various cosolvents as the polymerization medium, we found that acetonitrile/2-methoxyethanol was the only system that provided spherical particles without coagulation. This finding indicates that the precipitation polymerization is strongly dependent on the solvent used as the medium.

• 공업화학
• /
• 제28권4호
• /
• pp.485-489
• /
• 2017

Polyethylene terephthalate (PET)는 화학적 안정성과 높은 기계적 강도를 가지고 있어 식품, 의류 등 다양한 분야에서 사용되고 있으며, 이로 인해 PET는 주요 폐플라스틱 폐기물 중 하나이다. 본 연구에서 PET를 재활용하기 위해 ethylene glycol (EG)와 glycolysis의 반응을 이용하여 단량체 회수에 관한 연구를 수행하였다. 마이크로 튜빙 반응기를 사용하여 EG/PET비율 1~4, 반응시간 15~90 min, 반응온도 $250{\sim}325^{\circ}C$에서 망간, 구리 촉매 조건하에서 연구를 진행하였다. 10 wt% $Cu/{\gamma}-Al_2O_3$ 촉매에서 반응온도, 시간과 EG/PET의 비가 각각 $300^{\circ}C$, 30 min와 1 : 2였을 때 가장 높은 89.46%의 bis (2-hydroxyethyl) terephthalate monomer (BHET) 수율을 나타내었다.

• Bulletin of the Korean Chemical Society
• /
• 제28권9호
• /
• pp.1493-1498
• /
• 2007

In this work, alkyl methacrylate-based microgels were synthesized by an experimental design method, and their sebum absorption characteristics were investigated. The results of fractional factorial experimentation indicated that the cross-linking agent content, solvent content, and stirring speed were the main parameters in the synthesis of the microgels. The suitable synthesis conditions were determined by the response surface design method. Through a study of the monomer and solvent effects, it was confirmed that the microgel shows the highest sebum absorption ratio when t-butyl methacrylate is used as a monomer or when acetone is used as a solvent. The optimal microgel synthesis conditions for cosmetic application were determined, and the resulting microgel had a mean particle size of 4.7 μm and a sebum absorption ratio of 435%.

• Journal of the Korean Wood Science and Technology
• /
• 제25권3호
• /
• pp.75-82
• /
• 1997

To improve the quality of coated paper, the continuous research to the coating components and development of alternative latices is required. Recently, amphoteric latex is getting a great concern due to their changable properties of surface charge through controlling pH and some methods have been tried to prepare amphoteric latices. This study was carried out to synthesize amphoteric latex using seeding polymerization method with low concentration emulsifier. Styrene was used as a main monomer in addition to acrylonitrile for a hydrophilic comonomer. acrylic acid for a anionic comonomer and N,N-dimethylaminoethyl methacrylate for a cationic comonomer. Particle size and viscosity of latex were greatly affected by addition of acrylic acid and ammonium persulfate as an initiator. Negative charge of latex in alkali condition was changed to zero to positive charge in around pH 4.

• 한국재료학회지
• /
• 제32권4호
• /
• pp.193-199
• /
• 2022

In this study, lenses are fabricated using various nanomaterials as additives to a silicone polymer made with an optimum mixing ratio and short polymerization time. In addition, PVP is added at a ratio of 1 % to investigate the physical properties according to the degree of dispersion, and the compatibility with hydrophobic silicone and the possibility of application as a functional lens material are confirmed. The main materials are SIU as a silicone monomer, DMA, a hydrophilic copolymer, EGDMA as a crosslinking agent, and 2H2M as a photoinitiator. Holmium (III) oxide, Europium (III) oxide, aluminum oxide, and PVP are used. When Holmium (III) oxide and Europium (III) oxide are added based on the Ref sample, the characteristics of the lens tend to be similar overall, and the aluminum oxide shows a tendency slightly different from the previous two oxides. This material can be used as a silicone lens material with various nano oxides and polyvinylpyrrolidone (PVP) acting as a dispersant.

• Elastomers and Composites
• /
• 제47권1호
• /
• pp.75-81
• /
• 2012

주단량체로 에틸 아크릴레이트, 부틸 아크릴레이트, 메톡시에틸 아크릴레이트, 가교 단량체로 글리시딜 메타아크릴레이트를 유화중합하여 아크릴고무를 제조한 후, 가교제로써 2,2-bis[4-(4-aminophenoxy)phenyl]propane를 첨가하여 고무컴파운드를 제조하였다. 주단량체의 조성에서 에틸 아크릴레이트의 함량이 증가하면 내열성이 증가하는 경향을 보였는데 이는 아크릴고무의 유리전이온도가 감소되었기 때문이다. 또한 에틸 아크릴레이트의 에스테르 그룹 농도가 3개의 주단량체 중 가장 높기 때문에 에틸 아크릴레이트 함량이 증가할수록 내유성이 향상되었다. 2,2-Bis[4-(4-aminophenoxy)phenyl]propane의 함유량에 따른 영향은 2 phr 첨가까지 인장강도와 신장율은 증가하지만, 그 이상의 첨가에서는 가교밀도의 증가에 따른 점성과 탄성이 감소하여 그 값들이 감소하였다.

• Elastomers and Composites
• /
• 제54권2호
• /
• pp.128-134
• /
• 2019

Many scientific approaches have been developed for the preparation of alternative crosslinker system of amino resins and isocyanate prepolymers. Herein, copolymerization of trimethoxy silane with N-butoxymethyl acrylamide was performed, and the product was reacted with hydroxyl groups in the alkyl main chain without the need for an additional crosslinker. For the crosslinker synthesized herein, the molecular weight, glass transition temperature, and viscosity increased with increasing content of N-butoxymethyl acrylamide.

• Elastomers and Composites
• /
• 제48권3호
• /
• pp.195-200
• /
• 2013

본 연구의 주요 목적은 신발 겉창 재료로 사용하기 위하여 열가소성 폴리우레탄 (TPU)의 내마모성과 습윤시의 내슬립성을 에틸렌-프로필렌-디엔 고무 (EPDM) 또는 폴리부타디엔 고무 (BR)를 블렌드하여 향상시키는 것이다. 10 wt%의 EPDM 또는 BR이 TPU에 투입되었을 때 TPU/EPDM과 TPU/BR 블렌드는 TPU보다 우수한 NBS 내마모도, 인장 물성 그리고 습윤 내슬립성을 보였다. 10 wt% 이상 투입될 때는 내마모도와 인장 물성 모두 감소하였다. 10 wt% 투입시의 내마모도와 인장물성 상승은 TPU의 상분리도 증가에 기인하는 것으로 보인다.

• 접착 및 계면
• /
• 제17권2호
• /
• pp.56-61
• /
• 2016

본 연구에서는 아크릴 접착제의 물성에 대한 주 모노머의 영향을 비교하기 위하여 2-ethylhexyl acrylate 대신에 butyl acrylate를 사용하여 acrylic acid와 2-hydroxyethyl methacrylate의 공중합체를 합성하고 2종의 경화제를 이용하여 접착 물성을 연구하였다. 선형의 측쇄사슬을 가진 butyl acrylate계 점착제는 가지형태의 측쇄를 가진 2-ethylhexyl acrylate계 접착제에 비해 낮은 접착특성을 보였다. 경화제의 경우 가교점이 많고 가교반응을 통해 유연한 ether나 ester그룹을 생성하는 epoxy형 경화제에서 우수한 물성을 보였고 관능기인 산의 농도가 높을수록 접착특성이 향상되는 것을 관찰하였다.