• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.181-191
• /
• 2019

Most of the reservoirs in South Korea are fill dam, and overflow and piping phenomena have been detected as the main causes of failure of fill dam. In this study, an operating ◯◯ reservoir located in Gongju-si is modeled in centrifuge model test to study the behavior of reservoir during water level rise and overflow conditions. In order to simulate seepage and overflow in the real reservoir, the model was constructed in 1/50 scale, and deteriorated and reinforced conduits were installed. After modeling the reinforced and deteriorated conditions of the conduits, LVDTs, pore pressure gauges were installed and centrifuge model tests were carried out with water level rise and overflow conditions in order to analyze the reservoir behavior according to the reinforcement methods. The results of centrifuge model test in water level rise condition show that deteriorated conduit has adverse effects in the stability of the reservoir body, and the conduit which is reinforced by the inverse lining method has enhanced stability of the reservoir body. Moreover, installation of water spillway is seen to prevent the scour and erosion of the reservoir body. The study provides a basic data required for the reinforcement of conduit and water spillway in the reservoir.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.3 s.151
• /
• pp.407-411
• /
• 2006

This study was carried out to investigate the physiological responses of obese children after a short-term wear training and education. A ten-week program was conducted on thirteen obese elementary school children of six boys and seven girls in the 4th to the 6th grade. During the program, the children were instructed to measure daily ambient temperature and weight of their clothing. Physiological responses of the sedentary children in 100$\%$ cotton short sleeved t-shirt (0.13clo) and T/C short pants(0.09clo) were observed in the climatic chamber of 23.0$\pm$0.5$^{circ}C$ and 50$\pm$5$\%$RH before and after program. During the experiment, internal ear temperature ($T_{ear}$), seven site skin temperatures, systolic blood pressure, diastolic blood pressure, heart rate, and subjective responses of thermal comfort and thermal sensation were measured every 5minutes. Mean skin temperature($T_{sk}$) and mean arterial pressure(MAP) were calculated. Obtained data are statistically analyzed and main results are as follows. There was highly significant correlation between the ambient temperature and the total clothing weight. $T_{ear}$ and MAP were reduced in the post-program compared to the pre-program. The obese girls felt slightly warmer than the obese boys and the girls were likely to prefer lower ambient temperature in the post-program than the pre-program. It was concluded that the 10 week wear training is apt to be more applicable to the obese girls than the obese boys. However, a more comprehensive study including. diverse measurements of deep body temperature with a long-term training would be needed to clarify the improvement of temperature adaptability in the obese children.

• The Journal of Korean Physical Therapy
• /
• v.16 no.1
• /
• pp.85-123
• /
• 2004

Back ground : Subcutaneous fat area is the main factor involved in replacement disease and arteriosclerosis. Simple weight control is the appropriate medical treatment. It's understood that weight reduction does not only reduce the fat concentrations in blood but also reduces blood pressure, improves glucose levels in diabetes patients and reduces incidents of heart disease. there are several methods for reducing fat in the abdominal region but their effectiveness is not folly understood. one method is electrical stimulation of the problem areas. Method : From May 1st 2002 to October 31st. The 15 subjects who received medical examination were aged between 25 and 53 and were of mixed gender. The subjects were divided into two groups one to received functional electrical stimulation and the other a control group. Using Broca's criterion for judging fat grades. I analysed the differences between the two groups before and after the treatment. Subjects received functional electrical stimulation on the abdominal muscle intensity 50Hz. They received this treatment 4 days a week for 40 minutes a day. In the case of aerobic exercise, at the Treadmill, we used it with the intensity of $75\%$ maximum heart rate (220-age). Result 1)After functional electrical stimulation in the case of male subjects, the weight was reduced 1.93kg, obesity $2.60\%$, fat mass 2.73kg, Percent body fat $4.40\%$, waist circumference 6.53cm, circumference of hips 5.53cm. On the other side, the quality of muscle was increased at the rate of 1.03kg, but it's not attentional level. The subcutaneous fat area was reduced by $26.63cm^2$, the visceral fat area was reduced by $43.00cm^2$, In the female subjects, we can see the reduction of fat grade by $26.63cm^2$, the quantity of body fat by 1.5kg, percent body fat by $1.77\%$, circumference of waist by 4.02cm, circumference of hips by 3.67cm, weight by 1.40kg but was increased 0.72kg at the quantity of muscles. We can see the reduction also in the subcutaneous fat area $24.03cm^2$, the visceral fat area by $25.36cm^2$. 2)After aerobic exercise, on the male subjects, we can see reduction of weight by 3.36kg, obesity by $4.00\%$, fat mass by 2.83kg and we can see increase at the soft lean mass by 2.96kg, but we can see reduction, the percent body fat by $3.03\%$, fat distribution by $0.023\%$, circumference of waist by 3.10cm, circumference of hips by 2.23cm. The female subjects show a reduction in the weight by 2.48kg, percent body fat by $2.20\%$, show an increase in the soft lean mass by 1.54kg. We can see a reduction in the quantity of fat mass by 2.32kg, the percent body fat by $2.80\%$, the circumference of waist by 2.16cm, the circumference of hips by 2.68cm, the fat distribution by $0.016\%$, the subcutaneous fat area by $15.25cm^2$ the visceral fat area by $11.52cm^2$. After aerobic exercise, we can't see the attentional change at the total cholesterol, triglyceride, high density lipoprotein cholesterol, low density lipoprotein cholesterol. 3)After the application of functional electrical stimulation and aerobic exercise, in result of measurement on the body ingredient, we could see the weight reduction and increase the quantity of muscle with the male group who exercised aerobic. We can see the attentional rate on the electrical stimulation about abdominal fat rate, circumference of waist, circumference of hips. The other hand, I couldn't see the attentional differences between the two groups in the rate of fatness and quantity of body fat and the rate of body fat. There isn't any attentional difference in the area of fat under skin, on the contrary, There is attentional difference in the fat in the internal organs area at the electrical stimulation site. We can't see the attentional change of total cholesterol, triglyceride, high density lipoprotein cholesterol, low density lipoprotein cholesterol between electrical stimulation and aerobic exercise. 4)After execution of functional electrical stimulation and aerobic exercise, in result of measurement on change of body ingredient among female objects, We could see weight reduction, increase at muscle quantity in the aerobic exercise group. We could see the attentional differences in the rate of fatness, the rate of abdominal region, the circumference which received electrical stimulation. But, we couldn't see the attentional differences between two groups in the quantity of body fatness, the circumference of hips. The subcutaneous fat area doesn't show the attentional differences. On the Contrary, we could see lots of differences in the visceral fat area of the electrical stimulation group. Conclusion The results show that functional electrical stimulation and aerobic exercise have insignificant differences when if comes to total cholesterol, triglyceride, high density lipoprotein cholesterol, low density lipoprotein cholesterol. Though there is affirmative change in body ingredient after both electrical stimulation and aerobic exercise. Functional electrical stimulation is more effective on the subcutaneous fat area and in changing visceral fat area. There fore. It is concluded that the physical therapy is more effective in the treatment of abdominal fatness.

• Journal of Veterinary Clinics
• /
• v.27 no.6
• /
• pp.735-739
• /
• 2010

An 8 month old female Maltese (body weight 3.6 kg) was referred with primary complaints of dyspnea and exercise intolerance. Diagnostic imaging studies revealed marked cardiomegaly and prominent main pulmonary trunk dilation on thoracic radiography, abnormally arisen aortic roots (toward right ventricle) with left-to right shunted perimembraneous ventricular septal defect located underneath of aortic root, aortic root was located to predominantly to the right ventricle and pulmonary regurgitation (peak velocity 4.7 m/s, pressure gradient ~88 mmHg) from pulmonary over-circulation and hypertension on echocardiography, indicating double outlet right ventricle (DORV). The dog was treated with furosemide (1 mg/kg, BID) for reducing volume overload at right ventricle, spironolatcone (1 mg/kg) and enalapril (0.5 mg/kg) for minimizing deleterious cardiac remodeling, and sildenafil (1 mg/kg) for lessening pulmonary over-circulation and hypertension. The clinical condition of this dog was improved after 1 week of medical treatment. The dog is currently survived and regularly monitored.

• Journal of Chest Surgery
• /
• v.25 no.3
• /
• pp.289-295
• /
• 1992

We evaluated the correlationship between the predicted defect size at preoperative examination and the actual defect size at operation room, by examining 69 cases of ventricular septal defect operated at the deparment of Thoracic and Cardiovascular surgery, Kyungpook University Hospital from January 1988 to December 1990. We excluded cases associated with other cardiac anomalies. Of the 69 cases, 39 are male and 30 female, forming 1.3:1 sex ratio in males favor. Their age range from 6 months to 16 year, and 4.3 on the average Their body weights are from 6 to 45kg and 15 on the average. According to Soto`s classification, perimembranous type costitutes 42 cases[61%], doubly committed subarterial type 23 cases[33%], and muscular type 4 cases[6%]. The average diameter of defect size is 8.0$\pm$3.5mm measured in 2D-echocardiogram, 5.6$\pm$3.4mm in angiogram, and 7.4$\pm$4.4mm in operative field. There is statistically significant correlation between the size from 2D-echocardiogram and actual defect size[p=0.001], and no significant difference between the two. Especially in the cases without anurysmal formation, they are nearly the same. Cardiothoracic ratio, pulmonary to systemic flow ratio, pressure ratio and resistance ratio also have statistically significant correlation. Main pumonary artery to descending aorta diameter ratio is correlated with the actual defect size. There is statistically significant correlation between the size from angiogram and actual defect size with some difference.

• Journal of Pharmacopuncture
• /
• v.18 no.4
• /
• pp.59-62
• /
• 2015

Objectives: A previous study showed that bee venom (BV) could cause anaphylaxis or other hypersensitivity reactions. Although hypersensitivity reactions due to sweet bee venom (SBV) have been reported, SBV has been reported to be associated with significantly reduced sensitization compared to BV. Although no systemic immediate hypersensitive response accompanied by abnormal vital signs has been reported with respect to SBV, we report a systemic immediate hypersensitive response that we experienced while trying to use SBV clinically. Methods: The patient had undergone BV treatment several times at other Oriental medicine clinics and had experienced no adverse reactions. She came to acupuncture & moxibustion department at Semyung university hospital of Oriental medicine (Je-cheon, Korea) complaining of facial hypoesthesia and was treated using SBV injections, her first SBV treatment. SBV, 0.05 cc, was injected at each of 8 acupoints, for a total of 0.40 cc: Jichang (ST4), Daeyeong (ST5), Hyeopgeo (ST6), Hagwan (ST7), Yepung (TE17), Imun (TE21), Cheonghoe (GB2), and Gwallyeo (SI18). Results: The patient showed systemic immediate hypersensitive reactions. The main symptoms were abdominal pain, nausea and perspiration, but common symptoms associated with hypersensitivity, such as edema, were mild. Abdominal pain was the most long-lasting symptom and was accompanied by nausea. Her body temperature decreased due to sweating. Her diastolic blood pressure could not be measured on three occasions. She remained alert, though the symptoms persisted. The following treatments were conducted in sequence; intramuscular epinephrine, 1 mg/mL, injection, intramuscular dexamethasone, 5 mg/mL, injection, intramuscular buscopan, 20 mg/mL, injection, oxygen ($O_2$) inhalation therapy, 1 L/minutes, via a nasal prong, and intravascular injection of normal saline, 1 L. After 12 hours of treatment, the symptoms had completely disappeared. Conclusion: This case shows that the use of SBV does not completely eliminate the possibility of hypersensitivity and that patients who received BV treatment before may also be sensitized to SBV. Thus, a skin test should be given prior to using SBV.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.4
• /
• pp.33-38
• /
• 2003

The Physics of the Plume-induced shock and separation Particularly at a high Plume to exit pressure ratio and supersonic speeds up to Mach 3.0 with and without a passive control method, porous extension, were studied using computational techniques. Mass-averaged Navier-Stokes equations with the RNG $\kappa$-$\varepsilon$ turbulence model were solved using a fully implicit finite volume scheme and a 4-stage Runge-Kutta method. The control methodology for plume-afterbody interactions is to use a perforated wall attached at either the nozzle exit or the edge of the missile base. The Effect of porous wall length on plume interference is also investigated The computational results show the main effect of the porous extension on plume-afterbody interactions is to restrain the plume from strongly underexpanding during a change in flight conditions. With control, a change in porous extension length has no significant effect rut plume interference.

• Journal of Chest Surgery
• /
• v.27 no.6
• /
• pp.435-443
• /
• 1994

Surgical procedures to relieve congenital right ventricular outflow tract[RVOT] obstruction of heart were performed on 125 patients from September 1985 to August 1992. There were 65 males and 60 females. Ages ranged from 7 months to 33 years with a mean age of 8 years. All the patients were divided into three main groups[I, II, III] depending on the presence or absence of cyanosis and combined anomalies. The patient were classified into two groups; A and B according to the outcome after surgical repair. Group A included the patients who had a good postoperative outcome with or without mild complications such as wound disruption, or hydrothorax. Group B included the patients who had a poor outcome including hospital death and significant postoperative complications such as heart failure, low output syndrome, respiratory failure, hepatic failure and others. And the results were summarized as follows. 1. There were no significant differences in age, body surface area and aortic dimension among the group I, II, and III, but there were significant differences among groups in pulmonary arterial dimension, ACT[aortic cross clamping time], TBT [total bypass time], preoperative and postoperative ratio of systolic pressure of right and left ventricles [pre PRV/RV and post PRV/LV], and the size of Hegar dilator which passed through the RVOT postoperatively [p<0.05]. 2. In the group A and B, there were significant differences in pulmonary arterial dimension [group A:1.6$\pm$0.5 cm, group B:1.9$\pm$0.6 cm], ACT [group A:102.3$\pm$ 46.0 minute, group B:76.1$\pm$46.1 minute], TBT [group A:133.9$\pm$56.6 minute, group B:94.9$\pm$51.9 minute], pre PRV/LV [group A:1.06$\pm$0.24, group B:0.8$\pm$0.32], post PRV/LV [group A:0.58$\pm$0.18, group B:0.43$\pm$0.16].It has been concluded that postoperative prognosis of RVOT obstruction was influenced by pulmonary arterial dimension, ACT, TBT, severity of RVOT obstruction [pre PRV/LV] and post PRV/LV.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.2
• /
• pp.110-115
• /
• 2010

This study was conducted to estimate the feasibility using thermal image measurement that is applicable to internal leak diagnosis for the power plant valve. Abnormal heating of valve surface associated with high temperature steam f10w toward valve outlet side in the condition of low temperature is a primary indicator of leakage problems in high temperature and pressure valves. Thermal imaging enables to see the invisible thermal radiation that may portend impending damage before their condition becomes critical. When steam flow in valve outlet side in the condition of low temperature is converted into heat transmitted through the valve body due to the internal leakage in valve. The existence of abnormally increasable leakage rate in the valve will result in abnormally high levels of heat to be generated that can be quickly identified with a thermal image avoiding energy loss or damage of valve component. From the experimental results, it was suggested that the thermal image measurement could be an effective way to precisely diagnose and evaluate internal leak situation of valve.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.7
• /
• pp.84-90
• /
• 2022

The purpose of the cover housing component of a car door is to protect the terminals of the plug housing that connects the electric control unit on the door side to the car body. Therefore, for a smooth assembly with the plug housing and to prevent contaminants from penetrating into the gaps that occur after assembly, the warpage of the cover housing should be minimized. In this study, to minimize the warpage of the cover housing, optimization was performed for design factors related to the mold and processes based on the injection molding simulation. These design factors include gate location, gate diameter, injection time, resin temperature, mold temperature, and packing pressure. To optimize the design factors, Taguchi's approach to the design of experiments was adopted. The optimal combination of the design factors and levels that minimize warpage was predicted through L₁₈-orthogonal array experiments and main effects analysis. Moreover, the warpage under the optimal design was estimated by the additive model, and it was confirmed through the simulation experiment that the estimated result was quite consistent with the experimental result. Additionally, it was found that the warpage under the optimal design was significantly improved compared to both the warpage under the initial design and the best warpage among the orthogonal array experimental results, which numerically decreased by 36.9% and 23.4%, respectively.