• EDISON SW 활용 경진대회 논문집
• /
• 제2회(2013년)
• /
• pp.382-386
• /
• 2013

본 연구에서는 Main Rotor Blade Tip 형상 변화에 따른 후류해석을 통해 와류 생성 및 주변 유동을 분석하여 블레이드 팁 형상의 변화가 와류 간섭을 감소시키는지의 여부를 확인하였다. EDISON CFD를 이용하여 블레이드 Blade Tip 형상에 따라 유동이 어떻게 나타나며, Blade 후류의 압력과 점성의 변화를 분석하여 와류의 양상을 해석하였다. 비교 Blade 형상은 2세대 긴 직사각형 모형, KUH 수리온의 Blade, 유로콥터사의 'Blue Edge'로 비교적 최근에 개발된 대표적인 Blade Tip 형상 3개로 정하였다. 결과를 토대로 블레이드 뒷전의 와류흐름 양상을 확인하여 블레이드 와류 간섭현상의 감소를 확인하였다.

• 한국정보전자통신기술학회논문지
• /
• 제10권5호
• /
• pp.389-395
• /
• 2017

본 논문은 주 블레이드 각도와 보조 블레이드 각도를 변화 주어서 ANSYS 유동해석 시뮬레이션 프로그램을 이용하여 최적의 조건을 찾고자 하였다. $45^{\circ}$로 주 블레이드 각도를 변경한 Shape 4는 주 블레이드 각도를 $0^{\circ}$로 한 Shape들 보다 효율은 110% ~ 250% 증가하고, 출력은 157.2% ~ 263.2% 증가했다. 그리고 주 블레이드의 Fin 크기를 2배 크게 변경한 Shape 5의 출력은 Shape 4에 비해 27.5%, Shape 1에 비해 70.8% 증가하였다. Case 구조에서 주 블레이드 형상이 Shape 1로서 동일한 경우에는 Case 1은 Case 2보다 효율은 15.4%, 출력은 13.3% 증가하였다. 그리고 $45^{\circ}$로 보조 블레이드 각도를 한 경우, 주 블레이드 형상이 핀 형태보다 벤디드 형태가 우수하였다. Case 4는 Case 1보다 47%, Case 3보다 13.6% 출력이 증가하였고, 효율은 Case 1보다 46.7%, Case 3보다 15.8% 증가하였다.

• 품질경영학회지
• /
• 제47권3호
• /
• pp.401-415
• /
• 2019

Purpose: When the SURION Aircraft operated in the fields, cracks are found in PU(polyurethane) Strip on main rotor blade. This study has been conducted to explain PU(polyurethane) Strip crack phenomenon of SURION main rotor blade and to propose useful solution of it by experimental method. Methods: This study considered a lot of factor because the SURION is operated at severe environment. This study investigated the influence of temperature, thermal shock, paint and primer process, PU Strip material, primer material. Results: The results of this study are as follows; The primer process was most excellent influence. The Application of primer having a brittleness caused by a crack of PU Strip. Other factors have influenced on the PU Strip, but they can not be controlled because they are related to the SURION's operating environment. Conclusion: The Quality of PU Strip on SURION main rotor blade was improved through removing the primer process. Finally, the reliability of main rotor blade was guaranteed through improving the quality of PU Strip.

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.158-162
• /
• 2017

This paper did basic study on the vertical-axis wind turbine. Namely, This paper was try to find the optimum conditions by using the ANSYS CFX simulation program through the changes of the main-blade angle and sub-blade angle. Main-blade Shape #4 angle $45^{\circ}$ compared to others Shape angle $0^{\circ}$ was increased by 157.2[%] to 263.2[%] in the power output and was increased by 110[%] to 250[%] in the power coefficient. Also, when the Shape #5 Fin length of main-blade doubles, because the power output was 70.8[%] compared to Shape #1 and 27.5[%] compared to Shape #4, and the power coefficient was 60[%] compared to Shape #1 and 28.6[%] compared to Shape #4, the power output and the power efficiency were rather reduced. The output current of Shape #4 was increased 109.9[%] compared to Shape #1 and increased 250[%] compared to Shape #5, and The output voltage of Shape #4 was increased 22.5[%] compared to Shape #1 and increased 3.7[%] compared to Shape #4.

• 한국항공우주학회지
• /
• 제46권2호
• /
• pp.159-166
• /
• 2018

본 연구에서는 소형민수헬기(Light Civil Helicopter, LCH)의 풍동시험에 필요한 축소 로터 블레이드에 대해 내부 구조설계와 동특성 및 하중해석을 수행하였다. 축소로터 풍동시험은 로터 시스템의 공력성능과 소음 특성을 평가하기 위해 수행되므로, 실제 크기의 로터시스템과 동일한 공력 특성을 모사할 수 있도록 축소 블레이드 설계 시 마하 스케일(Mach-scale) 기법을 적용하였다. 마하 스케일 블레이드는 실물 블레이드의 끝단속도(blade tip speed)와 동일한 값을 유지할 수 있도록 로터의 회전속도를 증가시켜야 하며, 블레이드 중량, 단면강성 및 고유진동수 등은 특정한 축소계수(${\lambda}$, scaling factor)를 통해 조정된다. 블레이드 내부의 주요 구성품인 스킨, 스파, 토션박스 등을 설계하기 위해 탄소섬유와 유리섬유 계열의 복합소재를 적용하였으며, 국내에서 수급이 가능한 프리프레그(prepreg) 형태의 복합소재를 적용하였다. 내부구조 설계가 완료된 블레이드에 대해 단면강성을 평가하기 위해 KSec2D 프로그램을 사용하였으며, 회전익 항공기의 통합해석 프로그램인 CAMRADII를 이용하여 축소 블레이드의 하중 분포와 동역학적 특성을 검토하였다.

• 한국정보전자통신기술학회논문지
• /
• 제11권5호
• /
• pp.565-571
• /
• 2018

본 논문은 주 블레이드를 V 형태로 설계하고 주 블레이드와 보조 블레이드의 매수를 변화시켜 최상의 설계조건을 확인하고자 한다. 출력과 효율은 주 블레이드 매수가 증가할수록 증가되었다. sample 2는 sample 1과 비교하면 출력이 50% 상승하였다. sample 3은 92.8%, sample 4는 114.2% 정도 상승하였으며, 효율은 sample 1과 비교하여 sample 2는 38.4%, sample 3과 sample 4는 각각 92.3%, 107.7% 상승하였다. 보조 블레이드 매수를 증가 할수록 출력과 효율이 증가되었다. sample 6은 sample 5와 비교하면 출력이 33.3% 증가하였고. sample 7은 42.1% 증가하였다. 효율은 sample 5와 비교하여 sample 6은 35.3%, sample 7은 47.1% 정도 증가되었다. 보조 블레이드와 주 블레이드를 각각 30매로 하였을 때(sample 8) 가장 높은 출력과 효율이 측정되었다. sample 8은 sample 4와 비교하면 출력은 5.6% 및 효율은 3.7% 증가하였다. sample 7과 비교하면 sample 8은 효율이 12% 및 출력이 17.3% 증가되었다.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권2호
• /
• pp.190-199
• /
• 2011

Unsteady flow simulations of complete helicopter configurations were conducted, and the flow fields and the aerodynamic interferences between the main rotor, fuselage, and tail rotor were investigated. For these simulations, a three-dimensional flow solver based on unstructured meshes was used, coupled with an overset mesh technique to handle relative motion among those components. To validate the flow solver, calculations were made for a UH-60A complete helicopter configuration at high-speed and low-speed forward flight conditions, and the unsteady airloads on the main rotor blade were compared to available flight test data and other calculated results. The results showed that the fuselage changed the rotor inflow distribution in the main rotor blade airloads. Such unsteady vibratory airloads were produced on the fuselage, which were nearly in-phase with the blade passage over the fuselage. The flow solver was then applied to the simulation of a generic complete helicopter configuration at various flight conditions, and the results were compared with those of the CAMRAD-II comprehensive analysis code. It was found that the main rotor blades strongly interact with a pair of disk-vortices at the outer edge of the rotor disk plane, which leads to high pulse airloads on the blade, and these airloads behave differently depending on the specific flight condition.

• Journal of Welding and Joining
• /
• 제19권3호
• /
• pp.298-304
• /
• 2001

Turbine blade is subject to force of three types ; the torsional force by torsional mount, the centrifugal force by the rotation of rotor and the cyclic bending force by steam pressure. The cyclic bending force was a main factor on fatigue strength. SEM fractography in root of turbine blade showed micro-clack width was not dependent on stress intensity factor range. Especially, fatigue did not exist on SEM photograph in root of turbine blade. To clear out the fracture mechanism of turbine blade, nanofractography was needed on 3-dimensional crack initiation and crack growth with high magnification. Fatigue striation partially existed on AFM photograph in root of turbine blade. Therefore, to find a fracture mechanism of the torsion-mounted blade in nuclear power plant, the relation between stress intensity factor range and surface roughness measured by AFM was estimated, and then the load amplitude ΔP applied to turbine blade was predicted exactly by root mean square roughness.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.448-448
• /
• 2009

A new blade has been developed to apply to Doosan 3MW offshore wind turbine named as WinDS3000TM. The 3MW blade has been designed by the concept of slim external shape and optimized structure. High-performance glass fiber reinforced epoxy composites were used as the main material of the blade. The blade was manufactured using vacuum infusion process in order to increase the fiber volume fraction and to reduce micro-porosities. The blade has successfully passed the full-scale blade static test for certification. During the test, micro-failure signal and strain change of the blade were measured using acoustic emission sensors and strain gages. The blade has robust structure and weighs lighter compared to conventional blade since the new blade was designed by optimization process. The 3MW blade will be commercially applied to WinDS$3000^{TM}$ in 2010.

• International Journal of Fluid Machinery and Systems
• /
• 제4권4호
• /
• pp.396-409
• /
• 2011

Water turbines have been used in electricity generation for well over a century. Hydroelectricity now supplies 19% of world electricity. Many hydro power plants are operated with Pelton turbines, which is an impulse turbine. The main reasons for using impulse turbines are that they are very simple and relatively cheap. As the stream flow varies, water flow to the turbine can be easily controlled by changing the number of nozzles or by using adjustable nozzles. Scientific investigation and design of turbines saw rapid advancement during last century. Most of the research that had been done on turbines were focused on improving the performance with particular reference to turbine components such as shaft seals, speed increasers and bearings. There is not much information available on effects of blade friction on the performance of turbine. The main focus in this paper is to analyze the performance of Pelton turbine particularly with respect to their blade friction.