• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.204-207
• /
• 2001

An optimization process for the design of groundwater remediation is developed by simultaneously considering the well location and the pumping rate. This process uses two independent models: simulation and optimization model. Groundwater flow and contaminant transport are simulated with MODFLOW and MT3D in simulation model. In optimization model, the location and pumping rate of each well are determined and evaluated by the genetic algorithm. In a homogeneous and symmetric domain, the developed model is tested using sequential pairs for pumping rate of each well, and the model gives more improved result than the model using sequential pairs. In application cases, the suggested optimal design shows that the main location of wells is on the centerline of contaminate distribution. The resulting optimal design also shows that the well with maximum pumping rate is replaced with the further one from the contaminant source along flow direction and that the optimal pumping rate declines when more cleanup time is given. But the optimal pumping rate is not linearly proportional to the cleanup time and the minimum total pumping volume does not coincide with the optimal pumping rate.

• Journal of Ocean Engineering and Technology
• /
• v.1 no.2
• /
• pp.93-100
• /
• 1987

Corrosion fatigue cracking of the austenitic stainless steel(bese metal & heat affected zone by TIG weld) was studied experimentally under the environments of various specific resistance and air. The characteristics of corrosion fatigue crack growth rate and the environmental constants of paris' rule were investigated for SUS 304 weldments in the various specific resistance. The influences of stress intensity factor range and corrosion on the crack growth rate were compared. The characteristics of corrosion fatigue cracking for the weldments were inspected from mechanical, electrochemical and microstructural point of view. Main results obtained are as follows: 1) As the specific resistance decreases, the environmental constant C of paris'rule increases(hence the corrosion fatigue crack growth rate is rapid), but the environmental constant m decreases, so the effect of corrosion to the crack growth rate is more susceptible than thet of stress intensity factor range. 2) As the stress intensity factor range decreases, the corrosion fatigue crack growth rate of heat affected zone is more susceptible than that of the base metal. 3) The corrosion fatigue crack growth rate of the heat affected zone is more rapid than that of the base metal, because of the phenomenon of softening and the less noble potential coused by wedlding heat cycle. 4) The corrosion fatigue cracking of SUS 304 weldment appears transgranular fracture.

• East Asian Economic Review
• /
• v.17 no.3
• /
• pp.281-310
• /
• 2013

The aim of this paper is to estimate the degree of RMB misalignment from its equilibrium exchange rate by applying the Behavioral Equilibrium Exchange Rate (BEER) approach. We employ monthly data with reference to China's top 20 trading partners covering the period of 1997 to 2012. We find that the RMB was slightly overvalued before 2001 and significantly undervalued by up to 20 per cent in the end of 2006. There is evidence showing that the RMB approached to its equilibrium level from 2007 to 2008. However, the global financial crisis interrupted the trend of declining misalignment of RMB exchange rate. The RMB's total misalignment increased to around 25 per cent in the mid-2011 mainly because the RMB was re-pegged to the US dollar and some currencies of China's main trading partners depreciated during the period of crisis. More recently, the degree of RMB misalignment slightly declined since 2012 when the RMB proceeded to appreciate and China's ratio of current account surplus to GDP dropped considerably. Our findings prove that there is a trend of the RMB approaching to its equilibrium exchange rate since 2007 except for the period of crisis.

• Korea Trade Review
• /
• v.44 no.1
• /
• pp.17-30
• /
• 2019

This study is to investigate the effect of real exchange rate on bilateral trade balance between Korea and ASEAN 10 countries. Using quarterly data from 1991 to 2017 the paper analyzes whether or not the real depreciation of Korea's won could improve the trade balance in the short and long term. Based on Autoregressive Distributed Lag(ARDL) model, the empirical results show that trade balance, GDP, and real exchange rate are all cointegrated, representing the long-run relationship among variables. In the consideration of long-run relationship, the increases in ASEAN countries' GDP could have a negative impact and Korea's GDP positive impact on trade balance between Korea and ASEAN countries unexpectedly. For the main variable, the paper did not find the long-term effect of real exchange rate on the trade balance, for the short-term effect of the real exchange rate it was found that there exists the J-curve effect only in the case of Vietnam and Brunei. Therefore, these results imply that the intended policy concerning the exchange rate in the free-floating exchange rate system could be limited to improve the trade balance between Korea and ASEAN countries.

• Steel and Composite Structures
• /
• v.47 no.3
• /
• pp.355-363
• /
• 2023

The main purpose of this study is to characterize the size-dependent strain rate sensitivity in structural steel using the continue stiffness measurement (CSM) indentation. A series of experiments, such as CSM indentation and optical microscope examination, has been performed at the room temperature at different rate conditions. The results indicated that indentation hardness, strain rate, and flow stress showed size-dependent behavior. The dependency of indentation hardness, strain rate, and flow stress on the indentation size was attributed to the transition of the dislocation nucleation rate and the dislocation behaviors during the indentation process. Since both hardness and strain rate showed the size-dependent behavior, SRS tended to depend on the indentation depth. The results indicated that the SRS was quite high over 2.0 at the indentation depth of 240 nm and quickly dropping to 0.08, finally around 0.046 at large indents. The SRS values at large indentations strongly agree with the general range reported for several types of low-carbon steel in the literature (Chatfield and Rote 1974, Nguyen et al. 2018b, Luecke et al. 2005). The results from the present study can be used in both static and dynamic analyses of structures as well as to assess and understand the deformation mechanism and the stress-state of material underneath the indenter tip during the process of the indentation testing.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.8
• /
• pp.1083-1090
• /
• 1998

A kind of three-way check valve, so called hydraulic calve was proposed for the substitute of the density lock of passive reactor such as SPWR (System-Integrated Pressurized Water Reactor). The function of the valve are the separation of the borated water from main coolant loop for normal operation and the insurge of the water into the loop for shutdown and the removal of the decay power when the main coolant flow rate is not enough. To verify the operability and the characteristics of the valve, experimental works were executed with 1/3 scale model calve. Also a diffuser model was proposed for the theoretical analysis of the valve.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.685-691
• /
• 1993

This paper introduces a PC-based image data processing unit that is composed of preprocessor board and main processor board; The preprocessor contains Inmos A110 processor and efficient H/W architecture for fast mask/logic operations at the speed of video signal rate. It is controlled by the main processor which communicates with the host PC. The main processor board contains TI TMS320C31 digital signal processor, and can access the frame memory of the processor for extra S/W tasks. We test 3*3, 5*5 masks and logic operations on 386/486/DSP and compare the result with that of the proposed unit. The result shows ours are extremely faster than conventional CPU based approach, that is, over several hundred times faster than even DSP.

• Journal of The Korean Astronomical Society
• /
• v.29 no.spc1
• /
• pp.415-418
• /
• 1996

Space Solar Telescope (SST) is a space project for solar research, its main parameters are that total weight 2.0T, sun synchronous polar circular orbit, altitude of the orbit 730KM, 3 axis stabilized attitude system, power 1200W, telemetry of the downlink rate 30Mb/s, size $5{\ast}2{\ast}2\;M^3$, mission life 3 years. It is expected it will be launched in 2001 or later. The main objective is structure and evolution of solar vector magnetic field with very high spatial resolution. The payloads are consisted of 6 instruments: Main optical telescope with 1-M diameter and diffraction limited resolution 0.1 arc second, EUV imaging telescope with a bundle of four telescopes and 0.5 arc second resolution, spectrometric optical coronagraph, wide band spectrometer, H-alpha and white light telescope and solar and interplanetary radiospectrometer. An assessment study between China and Germany is under operation.

• Journal of applied mathematics & informatics
• /
• v.33 no.1_2
• /
• pp.77-87
• /
• 2015

Parallel lines are often used to increase production rate in many manufacturing systems where the main line splits into several lines in parallel, and after some operations, they merge into a main line again. Queueing networks with finite buffers have been widely used for modeling and analyzing manufacturing systems. This paper provides an approximation technique for multi-server two-stage networks with merge configuration and blocking which will be a building block for analysis of general manufacturing systems with parallel lines and merge configuration. The main idea of the method is to decompose the original system into subsystems that have two service stations with multiple servers, two buffers and external arrivals to the second stage are allowed. The subsystems are modeled by level dependent quasi-birth-and-death (LDQBD) process.

• Journal of Industrial Technology
• /
• v.18
• /
• pp.399-404
• /
• 1998

The purposes of this research were constructed the database, based on graphing the present water pollution in Han-river due to livestock wastewater(LSW). The LSW was below 1% in respect to quantity but about 7% in respect to pollutants loading in overall Han-river. The ratio of untreated LSW is 18% to 28%, which was higher compared to the municipal and industrial wastewater. In other words, LSW was about 0.05 times of municipal wastewater in respects to quantity but 2 times in respect to the ratio of untreated wastewater. So, it was necessary for treating LSW. The pollutants loading due to livestock wastewater of the South Han-river, North Han-river and main stream were 19.7%, 19.4% and 4.0%, respectively. This was about 7% in overall Han-river. We separated the Han-river into upper, mid and down stream. As a result, we found that the livestock wastewater is the main water pollution source of upper Han-river.