• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.11a
• /
• pp.153-156
• /
• 2002

본 연구는 스포츠웨어용 나일론 직물의 소리가 심한 소음으로 작용하여 착용자 뿐 만 아니라 상대방에게도 불쾌함을 주므로 이를 줄이기 위한 방향 모색의 하나로, 소리 자극에 대한 생리반응 중 근전도(Electrodiagnosis)와 소리에 대한 주관적 감성을 측정하여 의복 소음이 미치는 영향을 고찰하였다. 근전도는 상완이두근과 전완근에서 측정하였고, 주관적 평가는 FMME(Free Modulus Magnitude Estimation)를 이용하여 실시하였다. 직물 소리에 대한 상완이두근의 근전도 값은 직물별로 유의한 차이를 보였으나, 전완근에서는 대부분 비슷한 값을 보였다. 직물의 소리가 부드럽고 유쾌할수록 근전도값은 무자극시보다 감소하는 경향을 보였으나, 직물의 소리가 시끄럽고 날카로울수록 근전도값은 무자극시보다 증가하였다. 이로서, 직물의 소리는 상완이두근의 근전도 값에만 영향을 미치며, 직물 소음의 크기, 날카로움 등과 정적인 관계를 보이는 것을 볼 수 있었다.

• Journal of Biomedical Engineering Research
• /
• v.24 no.3
• /
• pp.141-149
• /
• 2003

This paper proposes a method of measuring and imaging the stiffness of human soft tissue to diagnose cancers or tumors which have been difficult to detect in ultrasound B-mode imaging systems. To measure the soft tissue stiffness, sinusoidal vibrations are applied to it, and the magnitude of its mechanical vibration is determined by estimating the temporal variation of speckle pattern brightness in ultrasound B-mode images. It is verified by simulation and experiment that the proposed method can estimate the relative tissue stiffness from B-mode images with a relatively small amount of computation.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.620-622
• /
• 1998

This paper presents a method for estimating parameters of high frequency transient signals when noise is added. The parameters to be estimated are the magnitude, frequency, and decay rate of the signals. An approach based on only the extended Kalman filter (EKF) is highly dependent on choosing a correct value of variance of noise. The proposed method adopts an adaptive Kalman filter (AKF). Having very little information of the noise, This method avoids deterioration of the filter performance caused by choosing an inaccurate variance of the noise. The dependence of the EKF method upon the noise variance and the efficiency of the AKF method are shown.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1998.04a
• /
• pp.31-38
• /
• 1998

In this study, statistical analyses implemented in the EPRI EQHAZARD programs were employed to estimate the sismicity parameters in the Korean peninsula based upon an combined Korean earthquake catalog. The combined earthquake catalog was prepared by performing earthquake clustering analysis on the collected earthquake catalogs provided by experts of the seismic panel during the PSA for Yonggwang Units 1 & 2. The duplicate earthquake events and secondary events in earthquake clusters have been successfully screened. The resultant earthquake catalog was analyzed to quantitatively assess the incompleteness of the earthquake catalog for specified earthquake magnitudes and time periods. The result shows that the earthquake catalog of the Korean peninsula is complete for the times periods of 1392 ~ 1750 and 1905 ~ 1989 (AD) and earthquake magnitude above 4.5. The PSHA methodology of EQHAZARD features the estimation of inhomogeneous a-and b-values within a seismic source. This study shows various results of a-and b-value is well constrained lying between o.6 and 1.0. Also the confidence of estimated a-and b-value for a specifed location was assessed by quantifing the uncertainty of these parameters using bootstrap simulation.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.456-463
• /
• 2002

Nowadays. risk management in the enterprise is considered as the important activity. Risk management ran be defined as the activity which is the analysis of risk factors related to damages, the estimation of the magnitude of risk, and the determination of investment to protect damage in a company. Initially, risk management was originated in financial areas. But the concept of risk has been expanded in the enterprise. Most companies have extended their activities in various areas. In this tendency, most activities must be considered in supply chain So, risk management must be ronsidered as the concept in the viewpoint of supply chain. The framework of risk management in supply chain and the related mathematical model are represented in this paper. Risk management in supply chain ran provide a positive opportunity not only to protect various damages, but also to improve the relationship between partners.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.605-612
• /
• 2002

The objective of this study is to investigate the behavior of Visco-Elasto-Plastic materials of Silicate Grouted Sands due to external load. Uniaxial compression strength of silicate grouted sands was increased accordingly with curing time, but it was almost unchanged after 7days. A series of uniaxial compression creep tests were peformed for $\sigma$/$\sigma$$\sub$f/ = 8%,16% and 24%. The tested Silicated Grouted Sands exhibits three types of strains : elastic, plastic, viscoelastic. It is seen that the magnitude of the instantaneous recoverable strains $\varepsilon$$\sub$r/(o) is approximately independent of the unloading time. In this tests, The total creep strains( elastic, plastic, viscoelastic) are proportional to the stress level. Based on the constant creep test results, relationships between the time and the creep compliance are developed.

• IE interfaces
• /
• v.10 no.3
• /
• pp.197-208
• /
• 1997

In workplace design, an ergonomic solution should ensure low postural stress in the operator during his/her work. Stress caused by awkward working postures of the trunk, shoulders and legs can result in fatigue, discomfort, musculo-skeletal disorders and nerve entrapment syndromes. Since discomfort and musculo-skeletal disorders are both related to exposure to biomechanical load on the musculo-skeletal system, minimization of discomfort will contribute to reduction of the risk for musculo-skeletal disorders as well. Therefore, in this study, perceived discomfort on the human body joints was measured in the standing postures using the magnitude estimation in order to have a standardized numerical scale for joint discomfort. Nine healthy graduate students participated voluntarily in the laboratory study. The results revealed that perceived discomfort of all the joints increased as the joints deviated from neutral position. Especially, it showed drastic increment on perceived discomfort when deviation from neutral position in each human body joint increased from 75% to 100%. in terms of relative range of motion(R0M). On the basis of these experimental results, a preliminary ranking for assessment of stressfulness of non-neutral postures around the human body joints was suggested.

• Journal of the Ergonomics Society of Korea
• /
• v.16 no.2
• /
• pp.73-82
• /
• 1997

Daily exposure to constrained body postures and deviations from neutral postures over a long period may result in discomfort as well as pains and aches in the muscles, joints, tendons, and other soft tissues. Furthermore, it was known that poor body postures are a major cause of musculoskeletal disorders in industry. Therefore, in this study, comfort ranges of joint motions were obtained as a criterion for evaluating body postures and designing workplaces ergonomically, which were bases on subjects' perceived discomfort level estimated by magnitude estimation. Nineteen healthy male subjects participated in the laboratory study. They results showed that comfort ranges of joint motions occurred in the wrist, elbow, neck, and ankle were little less than their normal range of joint motions, but those in the back(L5/S1) and hip joint were much less than their normal ones. This fact implies that the back and jip movements are more stressful than the other joints movements. It is expected that comfort ranges of joint motions can be used as a valuable guideline when designing and evaluating workplaces.

• Journal of the Korean Society for Railway
• /
• v.4 no.2
• /
• pp.39-46
• /
• 2001

In this paper, train running test and lateral resistant force test are conducted before and after sprinkling the ballast stabilizer in order to investigate the dynamic behaviors and parameters of the railroad track. The measured results are used to confirm the effect of the stabilizer and to validate the numerical results. From this paper, it is known that the stabilizer used in this study has excellent effect on increasing the vertical rigidity and the lateral resistance, and some correction factors should be considered on masses and rigidities of the track components in order to calculate the vibration magnitude reasonably due to running train.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.3
• /
• pp.67-71
• /
• 2016

This paper addresses a problem of defocus map recovery from single image. We describe a simple effective approach to estimate the spatial value of defocus blur at the edge location of the image. At first, we perform a re-blurring process using Gaussian function with input image, and calculate a gradient magnitude ratio with blurring amount between input image and re-blurred image. Then we get a full defocus map by propagating the blur amount at the edge location. Experimental result reveals that our method outperforms a reliable estimation of depth map, and shows that our algorithm is robust to noise, inaccurate edge location and interferences of neighboring edges within input image.