• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.212-214
• /
• 1994

At recent time, superconducting technology makes it possible to develop various devices using strong magnetic fields. As increasing with devices using high magnetic fields, magnetic shielding technology is essential in order to get high efficiency. Therefore it is necessary to establish production method and clear characteristics of suitable shielding materials. Usually, ferromagnetic metal has been used for shielding of high magnetic fields up to the present time. Instead of heavy ferromagnetic metal, we can acquire better upgraded shielding system by using of very light superconducting thin film that has a perfect diamagnetism. We would like to study basic characteristics of NbTi thin film produced by RF sputtering, investigated morphology and crystal structure of NbTi thin film by SEM and XRD, identified superconductivity measuring by critical current.

• 전자공학회논문지
• /
• 제51권1호
• /
• pp.211-218
• /
• 2014

본 논문에서는 NFC 나 핸드폰, 컴퓨터 등의 정보통신기기에 사용하기 위한 높은 주파수 대역의 전자파 차폐 필름을 개발하기 위하여, 주로 자계를 차폐할 수 있는 니켈 및 실리콘과 철의 합금의 연자성 특성을 연구함에 있어 최적의 합금조성으로 Fe-Si-Cr 합금과 Fe-Ni-Cr 합금의 자성특성에 대하여 연구하였고, 그 결과에 의하여 결정된 합금의 조성비에 따라 각 합금을 용융상태에서 수분산시켜 원형 편상의 연자성 합금분말을 만들었으며, 그들을 수지에 함침시키고 가열 회전 롤러를 이용한 캘린더 가공법으로 두께 0.1 mm 및 1 mm 의 필름을 만든 다음, 저주파에서부터 10GHz 마이크로파대역까지의 전자파에 대한 투자율과 차폐율에 대하여 연구하였다. 또한 본 논문에서는 합금 분말입자의 제조에 앞서, 합금의 투자율을 예측할 수 있는 식을 제안하였으며, 그 식의 합리성을 증명하기 위해 MATLAB을 이용하여 기 발표된 합금들의 투자율과 주파수 특성을 비교적 정확하게 기술하고 있음을 보였고, 그로부터 가장 이상적인 합금의 조성비를 결정하고, 분말입자가 수지에 함침된 필름의 투자율 역시 계산하였다. 전자파 차폐 수지 필름의 차폐율(Shielding Effectiveness)에 대한 시뮬레이션은 HFSS를 이용하였다.

• Carbon letters
• /
• 제27권
• /
• pp.90-97
• /
• 2018

Electromagnetic interference (EMI) shielding is an important issue in modern daily life due to the increasing prevalence of electronic devices and their compact design. This study estimated EMI-shielding effect (EMI-SE) of small ($8-14{\times}17mm$) Hanji (Korean traditional paper) doped with carbon nanotubes (CNTs) and compared to Hanji without CNT using $^2H$ (92.1 MHz) and $^{23}Na$ (158.7 MHz) nuclear magnetic resonance (NMR) peak area data obtained from 1 M NaCl in $D_2O$ samples in capillary tubes that were wrapped in the Hanji samples. The simpler method of using the variation of reflected power and tuning frequency by inserting the sample into an NMR coil was also tested at 242.9, 158.7, and 92.1 MHz. Overall, EMI shielding was relatively more effective at the higher frequencies. Our results validated that NMR methods to be useful to evaluate EMI-SE, particularly for small, flexible shielding materials, and demonstrated that EMI shielding by absorption is dominant in Hanji mixed with CNT.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권4호
• /
• pp.166-171
• /
• 2005

Shielding methods on ELF(Extremely Low Frequency) magnetic fields may include the use of induced currents, modification of magnetic field flux patterns using high permeability and/or high conductivity materials, and others. The magnetic shielding properties of enclosures can be utilized to reduce the magnetic field of current carrying conductors. In this paper, to get a more practical understanding of shielding phenomena, we have investigated the magnetic field reduction by means of 3 dimensional numerical analysis and experiments. We found copper could reduce flux density more then permalloy in both cases of box shield and cylindrical shield. Iron under l0$\mu$T of 1 phase could reduce flux density about $20\%$ more than silicon steel, but both of them under 50$\mu$T has a similar reduction rate of $10\%$. The 3 phase horizontal model gave the highest reduction rate and the 1mm thickness iron under 10$\mu$T of 3 phase lines did lowest.

• 마이크로전자및패키징학회지
• /
• 제23권2호
• /
• pp.57-63
• /
• 2016

We developed a flexible and micro-thick electromagnetic interference (EMI) shielding nanofabric layer that also functions as a water resisting and heat sinking material. Electrospinning followed by a simple heat treatment process was carried on to produce the EMI-shielding Ni/C hybrid nanofibers. The ambient oxygen partial pressure ($pO_2$ = 0.1, 0.7, 1.3 Torr) applied during the heat treatment was varied in order to optimize the effectiveness of EMI-shielding by modifying the size and crystallinity of the magnetic Ni nanoparticles distributed throughout the C nanofibers. Permittivity and permeability of the nanofibers under the electromagnetic (EM) wave frequency range of 300 MHz~1 GHz were measured, which implied the EMI-shielding effectiveness (SE) optimization at $pO_2$ = 0.7 Torr during the heat treatment. The materials' heat diffusivity for both in-plane direction and vertical direction was measured to confirm the anisotropic thermal diffusivity that can effectively deliver and sink the local heat produced during device operations. Also, the nanofibers were aged at room temperature in oxygen ambient for water resisting function.

• 한국전자파학회논문지
• /
• 제20권7호
• /
• pp.639-647
• /
• 2009

본 연구에서는 자기장 차폐를 위하여 3상 전력 케이블을 얇은 자성 판재로 둘러싸는 방법을 제안한다. 두꺼운 상용 뮤-메탈, 방향성 및 무방향성 규소 강판을 출발 재료로 하여 두께 0.1 mm의 차폐재 3종류를 제조하였다. 3상 전류일 때, 차폐재 위치의 자기장이 100 ${\mu}T$ 정도이면 뮤-메탈이 (SF<0.1) 가장 효과적이었고, 500 ${\mu}T$ 이상 이면 규소 강판이 (SF 0.3${\sim}$0.4) 더 효과적이었다. 또한, 안쪽에 방향성 규소 강판, 바깥쪽에 뮤-메탈을 함께 둘러쌀 경우 500 ${\mu}T$까지도 SF 를 0.1 이하로 할 수 있었다. 한편, 단상 전류에서는 고 투자율 소재의 적용은 오히려 자기장을 증가시키는 결과를 보였다. 이상의 결과는 자기장 강도 H의 크기에 따라 각 소재의 투자율 우열이 서로 다른 점과 이로 인해 차폐재 내에 유도되는 자기장 벡터와 원래의 자기장 벡터의 상호 상쇄 및 중첩 작용으로 설명할 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.609-612
• /
• 2001

To investigate the magnetic field distribution of power line, we used amorphous wire sensor. And we discuss extremely low frequency magnetic field distribution dependent upon arrangement of power line and shielding pipe made from iron or alumimum materials by both measurement and FEM(Finite Element Method) analysis. Appling current of single phase 60 [Hz] 15 [A] is supplied to copper wire coated enamel resign. As the results, we confirmed that linear characteristics of amorphous wire sensor is very excellent and measurement value agrees with FEM calculation. Magnetic field distribution due to shielding materials is changed by permeability and conductivity.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1241-1242
• /
• 2006

Electromagnetic properties of $CeO_2$ doped and undoped YBaCuO superconductors were evaluated to investigate the effect of pinning center on the magnetization and magnetic shielding. The variation $\DeltaM$ with doping was maximum for 3% doping and decrease with further doping. The magnetic shielding was evaluated by measuring the induced voltage in secondary coil and the voltage initially set to 0.5V, decreased to 0.17V and 0.28V respectively for the undoped and 3% $CeO_2$ doped sample. The much less change in the induced voltage for the 3% doped sample is attributed to the increased flux shielding by shielding vortex current. The $CeO_2$ was converted to fine $BaCeO_3$ particles which were trapped in YBaCuO superconductor during the reaction sintering. The trapped fine particles, $BaCeO_3$ may be acted as a flux pinning center.

• Journal of Magnetics
• /
• 제18권1호
• /
• pp.9-13
• /
• 2013

Shielding effects in conductive and magnetic materials were investigated as a function of properties, thickness and diameter. In this work, evaluations on passive conductive and magnetic shield specimens were achieved through experimentation set-up using 50 Hz single and three phase induction field sources. Analysis on material microstructure properties and characteristics of shielding specimens were performed with the use of vibrating sample magnetometer (VSM) and field emission scanning electron microscopy (FESEM). An induction field at $136{\mu}T$ of single phase system and $50{\mu}T$ of three phase systems were observed to the shield specimens with the thickness ranged of 0.2 mm to 0.4 mm. It is observed that shield specimen efficiency becomes inversely proportionate to the increment of induction fields. The decrease was attributed to the surface structure texture which relates to the crystallization and non-crystallization geometrical effects.

• 한국콘텐츠학회논문지
• /
• 제21권2호
• /
• pp.431-436
• /
• 2021

본 연구는 자기공명검사실 내 전자기파가 나오는 부속장치를 대상으로 새로운 차폐방법을 적용하여 전자기파로 인한 인공물의 발생을 방지하고자 하였다. 연구방법은 차폐 기술이 적용되지 않은 환자 감시용 CCTV에 metal plating fiber 섬유로 제작된 새로운 차폐체를 적용하여, CCTV의 전원을 차단한 경우(type I)를 기준으로 전원을 차단하지 않은 경우(type II)와 차단하지 않은 상태에서 새로운 차폐 기술을 적용한 경우(type III)를 noise map을 획득하여 비교평가 하였다. 연구 결과, 유의한 차이가 존재하는 집단이 하나 이상 존재함을 알 수 있었으며 이를 바탕으로 사후분석을 시행한 결과 type I과 type III는 집단 1로 type II는 집단 2로 나타나 기준인 CCTV의 전원을 차단한 경우와 새로운 차폐 기술을 적용한 경우가 동일집단 임을 알 수 있었다. 결론적으로 검사실 내에서 추가적인 부속장치로 인해 전자기파가 발생할 경우 본 연구가 제시한 차폐체를 적용한다면 noise가 발생하지 않는 type I과 동일한 상태를 만들 수 있어 전자기파로 인한 인공물의 발생을 방지할 수 있으리라 판단된다.