• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.566-574
• /
• 2015

We report for the first time highly efficient trans-reflective color filters capable of demonstrating coloration in both transmission and reflection modes by taking advantage of a multilayer stack consisting of MgF₂ and TiO₂ used respectively as the low and high index materials. In order to enable such trans-reflective performance, securing an optimal stop band assuming an appropriate bandwidth within the visible regime is pivotal, which was realized by tailoring the thicknesses and the numbers of TiO₂-MgF₂ bi-layers. Three devices were designed through rigorous simulations and developed via e-beam evaporation to demonstrate vivid blue, green, and red colors in the reflection mode, and yellow, magenta, and cyan colors in the transmission mode, featuring an enhanced efficiency exceeding 90% under normal incidence. The color performance of the filters was examined by referring to the chromaticity coordinates of the transmission and reflection spectra, alongside photographed color images. The dependence of the performance on the angle of incidence was explored with respect to incident polarization, indicating that a transmission surpassing 60% could be stably maintained up to an angle of 75°. Polarization independent transfer characteristics were especially achieved for the normal incidence. The proposed devices may be readily extended to other spectral regimes by adjusting the thicknesses of the films.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.6
• /
• pp.35-46
• /
• 2007

This paper proposes a six-color separation method of reducing unnecessary usage of colorants based on the limitation of total colorant amount and dot visibility ordering. First, the CIELAB values of input RGB image are estimated through the color-mixing model and compared with pre-calculated CIELAB values corresponding to all combination of CMYKlclm colorants with a constraint of color difference, thereby selecting initial CMYKlclm candidates. Next, the limitation on total colorant amount Is imposed on initial CMYKlclm candidates to remove the excessive amounts of colorants, and then final CMYKlclm candidates are determined by minimizing the usage of light cyan and light magenta in the dark region based on the dot visibility ordering of C, M, Y, K, lc, and lm. Through the experiment, the proposed method is shown to reduce the excessive amount of colorants with preserving good image quality.

• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.498-503
• /
• 2013

Over the past decade, the feasibility of using ink-jet printing for the decoration of porcelain tiles has been explored, and significant advances have been made regarding the technologies underlying printing system and materials. An ink-jet printing system for porcelain tiles has many advantages compared with a conventional printing system, including the following: (1) it is a digital process; (2) it uses non-contact printing; (3) it allows random image generation; (4) it is a highly efficient process (reduced production cost); (5) it offers massive and continuous production; and (6) it uses inorganic pigment colorants. For these reasons, ink-jet printing systems for porcelain tiles have been commercialized and are at present rapidly spreading toceramics-leading countries such as Spain, Italy, China and Japan. We also developed a proprietary system involving a piezo-electric drop-on-demand method and an ink-circulation step. The resolution of this system is greater than 360 dpi after a heat treatment and the maximum printable width is 600 mm, even when setting the printing head unit with four digital colors (cyan, magenta, yellow, and black). In addition, we systematically developed ceramic colorant-containing inks and tile-printing technology applicable to our ink-jet printing system.

• Genomics & Informatics
• /
• v.12 no.4
• /
• pp.195-202
• /
• 2014

Metabolic syndrome (MetS) is a complex disorder related to insulin resistance, obesity, and inflammation. Genetic and environmental factors also contribute to the development of MetS, and through genome-wide association studies (GWASs), important susceptibility loci have been identified. However, GWASs focus more on individual single-nucleotide polymorphisms (SNPs), explaining only a small portion of genetic heritability. To overcome this limitation, pathway analyses are being applied to GWAS datasets. The aim of this study is to elucidate the biological pathways involved in the pathogenesis of MetS through pathway analysis. Cohort data from the Korea Associated Resource (KARE) was used for analysis, which include 8,842 individuals (age, $52.2{\pm}8.9years$ ; body mass index, $24.6{\pm}3.2kg/m^2$). A total of 312,121 autosomal SNPs were obtained after quality control. Pathway analysis was conducted using Meta-analysis Gene-Set Enrichment of Variant Associations (MAGENTA) to discover the biological pathways associated with MetS. In the discovery phase, SNPs from chromosome 12, including rs11066280, rs2074356, and rs12229654, were associated with MetS (p < $5{\times}10^{-6}$), and rs11066280 satisfied the Bonferroni-corrected cutoff (unadjusted p < $1.38{\times}10^{-7}$, Bonferroni-adjusted p < 0.05). Through pathway analysis, biological pathways, including electron carrier activity, signaling by platelet-derived growth factor (PDGF), the mitogen-activated protein kinase kinase kinase cascade, PDGF binding, peroxisome proliferator-activated receptor (PPAR) signaling, and DNA repair, were associated with MetS. Through pathway analysis of MetS, pathways related with PDGF, mitogen-activated protein kinase, and PPAR signaling, as well as nucleic acid binding, protein secretion, and DNA repair, were identified. Further studies will be needed to clarify the genetic pathogenesis leading to MetS.

• Fashion & Textile Research Journal
• /
• v.15 no.5
• /
• pp.808-814
• /
• 2013

In this study, The mixture of three kinds of pre-treatment agents, Carboxymethyl cellulose sodium salt(CMC), Sodium alginate and Dextrin, have been prepared for the better coloration of digital textile printing. To get sharpness of outline during digital printing process, the optimal formulation is the CMC and Sodium alginate mixture 1:1 ratio by volume. Cyan, Yellow, and Black colours are excellent on the Sodium alginate mixtures. But, Magenta is excellent in the CMC and Dextrin mixture. Sharpness and printability are closely related to viscosity of the mixture. The most optimal sharpness of outline achieved with a consideration of coloring, and field operations account for production when the viscosity of the mixed pre-treatment agent approximately is 10~13 cSt. Change in shade and staining of wash fastness for all the treated samples with the mixtures rated 4-5 grade. Both dry rubbing fastness to shade change and staining are good in the treated samples, whereas wet rubbing fastness rated 2-3 grade. To improve wet rubbing fastness, the Sodium alginate and Dextrine mixture, which rated 3-4 grade for Black color, is applicable. With exception of 3 rating to black color, Light fastness is 4 rating for the remaining three colors in the regardless of treatment condition and mixing of the pre-treatment agent. Dry cleaning fastness of all samples are also 4-5 rating.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.2
• /
• pp.35-45
• /
• 2012

Need color separation process to appear number of minimum printing plate waterway maximum printing color at printing process. This time, printing plate is separated three primary colors of C(cyan), M(magenta), Y(yellow). Appear all colors of printing such three primary colors. But, three primary color ink appears 100% dark gray that is not clean as chroma is neared color to 0 because is not pure. As well as, the ink area rate that is whole by over print amount increase of three primary is expanded. As a result, influence in secondary printablity set-off growth by inaccurate color reproduction and ink dry badness, trapping efficiency decline etc.. Apply ink saving method that is replaced as K ink in consisted dark color constituent because three primary colors are over print each other adding one more K(black) plate by method to improve these problem. Therefore, can reduce extension of the total ink area rate, and help in correct color appearance control. As well as, eco-friendly printing process attains improving printablity at the same time curtailment of printing expense by reducing requirement of total ink. Usually, there are UCR(under color removal) and GCR(gray component replacement) to ink saving application method. But, the practical use limit is insufficient state to tribe of technological investigation or field application about these method in domestic printing field. Therefore, in this research, ink saving been bringing by one method of eco-friendly printing confirmed that is applicable in usual domestic printing environment. Also, searched result getting in printablity by ink saving application.

• Archives of design research
• /
• no.16
• /
• pp.225-234
• /
• 1996

The purpose of this study is to provide and suggest useful data in use of kinds of violet that is resulted from general color images of violet. The origin, history, and general images of kinds of violet were studied, and were classified vased on documcntary reviews. Findings are as follows: 1) The kinds of violet were used purple, violet, mauva, and magenta in the order of appearance of its color names and the categories of violet had been extended from dark reddish violet to affilicated colors of bright violet by development in synthetie dyestuff. 2) The kinds of violet has neutral characters due to the combination of two extreme colors, red and blue, and thereby revealing voth attreibutes in terms of symbolic, emotional, and spychological features of colors. The positive images in kinds of violet can be classified as nobleness, holiness, mysteriousness, sleep/sedation, sensuality, femininity, fragrance, and the negatibely classified images are weakness, sadness, maelancholiness, death(for example, the mourner's gard in royal families), symbols of moral corruption, and superstition.

• Textile Coloration and Finishing
• /
• v.33 no.2
• /
• pp.49-63
• /
• 2021

In this study, a convenient approach for sensitive, quick and simple detection of hazardous acids was investigated. A series of azo dyes were synthesized and applied as a chemosensor for the acid detection both on fibers and in solution. Various aniline, benzothiazole or isoxazole derivatives were used as diazo component and coupled with N-benzyl-N-ethylaniline or 2,2'-(phenylimino)bis-ethanol to give azo based dyes. The acid sensing phenomenon was observed by naked-eye and detection was further confirmed by UV-Vis spectrophotometer and hue difference(ΔH^*) evaluation. The developed sensors showed a distinct and quick color change from yellow to magenta by addition of trace amounts of the hazardous acids. The absorption maxima was shifted to a longer wavelength by 70 ~ 150nm and hue difference(ΔH^*) was 60 ~ 120°. A cotton fiber coated with Dye 1 exhibited excellent storage stability under various temperature(-30 ~ 43℃) and humidity(30 ~ 80%) conditions without discoloration and fading of the fiber sensors. Also the acid sensing properties were maintained.

• Journal of Microbiology
• /
• v.42 no.1
• /
• pp.25-31
• /
• 2004

Sf9 cells have obvious advantages for the conventional production technology of vaccine. They are useful tools for high concentration and large-scale cultures. Sf9 cells were grown to maximal concentration, 8${\times}$l0$\^$6/ cells/$m\ell$ in a 500$m\ell$ spinner flask, with a doubling time at the exponentially growing phase of 24.5 hours, using serum-free media. To explore the ability of Sf9 cells to be infected by the Japanese encephalitis (JE) virus Beijing-l strain, Sf9 cells were infected with the virus. By 4-5 days post-infection, 10-15 % of the Sf9 cells showed cytopathic effect (CPE), from granularity to the formation of syncytia and multinucleated giant cells continuously observed over a period of 35 days. Positive fluorescent reactions were detected in 30-40% of cells infected with the JE virus Beijing-l strain, and the uninfected Sf9 cells were completely negative. Virus particles, propagated in Sf9 and Vero cells, were concentrated by sedimentation on 40% trehalose cushions by ultracentrifugation, and showed identical patterns of viral morphogenesis. Complete virus particles, 40 to 50 nm in diameter, were observed, and JE virus envelope (E) proteins, at 53 kDa, were found in the western blot analysis to the anti-JE virus E protein monoclonal antibody and reacted as a magenta band in the same position to the glycoprotein staining. To evaluate whether the infectious virus was produced in Sf9 cells inoculated with the JE virus Beijing-l stain, Sf9 cells were inoculated with the virus, and sample harvested every 5 days. The titers of the JE virus Beijing-l strain rose from 1.0${\times}$l0$\^$5/ to 1.5${\times}$l0$\^$6/ pfu/$m\ell$. The infected Sf9 cells could be subcultured in serum-free medium, with no change in the plaque sizes formed by the JE virus Beijing-l strain in the plaque assay. It is suggested that the ability of the JE virus Beijing-l strain to infect Sf9 cells in serum-free media will provide a useful insect cell system, where the JE virus replication, cytopathogenicity and vaccine immunogen can be studied.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.1
• /
• pp.102-112
• /
• 2010

By understanding physiological characters of plants and the environment, plant design should decide the relationship with other plants from the designer's curiosity of the plant's color, texture, form and other aspects. There are a traditional tendency that many designers put the plant's color ahead of other aspects. This study explores 4 gardens of Gertrude Jekyll's Munstead Wood, Vita Sackvill-West's Sissinghurst, Christopher Lloyd's Grest Dixter and Lawrence Johnston's Hidcote Manner. The flower border of Munstead is started with light grey and blue at the edge and it gets stronger colors like red and orange as the line comes to the middle. It is noticeable that white an blue colors were used unlike before. Sissinghurst made use of purple color which was very seldom used before and Dixter added orange to magenta color that was already there, giving a strong visual effect and through juxtaposition it could realize the wanted effect. A strong red border line was created in Hidcote Manner. Above mentioned designers arranged various colors so that visitors can experience different spacial senses according to observer's direction. In the cognitive space the main color and the secondary color arranged leading to the fact that the observer recognizes it as a whole. In plant design time means seasonal performance which influences the main color arrangement like gradation or contrast. Moreover, space determines the color's zone when it comes to plant design.