• The Research Journal of the Costume Culture
• /
• v.10 no.2
• /
• pp.200-212
• /
• 2002

The purpose of this study is to make the internet website on the order-made fashion design so as to do meet the need of netizen in the 21st century. It made the consumer do the design which he or she wants by the combination of the compositions that do select the pattern of the skirt design to fit his or her size and body shape. For the set-up of website, the elements of composition must be considered, and also the planning and design must be done fur the order-made fashion design. With the internet website, it's possible to do reach the below points; first, it can make the consumer do the design which he or she wants by himself or herself; second, it can provide him or her the information of measuring his or her body shape to buy the design pattern which he or she wants. Third, it can be contributed to make the brand more active by improving his or her satisfaction with the design and pattern which he or she wants. Also it can bring up the effects as fellows; first, lashing power of the design can be increased by the order-made fashion design to attract his or her interest, and also it can make him or her more satisfied. Second, the competitiveness can be strengthened by the differentiation of the fashion site between the existing design and the order-made fashion design. Third, the production of design can be higher and also its expense can be reduced even for the small and medium-sized clothes maker or merchants. Finally, it is able to enlarge the applicable field into the design of small articles, home fashion, and textile which they want to sell the differentiated and order-made products.

• Fibers and Polymers
• /
• v.7 no.4
• /
• pp.398-403
• /
• 2006

Dimensional constants (k values) of single jersey fabrics made from $LincLITE^{(R)}$ and conventional yams are calculated under dry, steam, full relaxation treatments. Fabrics were made under different tightness factors such as high, medium and low with different twist factors, twist directions and feeder blending. $LincLITE^{(R)}$ yarns made to get soft and bulkier effects with yam count of 39 tex and conventional yams made into 39 tex and 48 tex yam counts. Various effects on K values are analysed using correlation coefficients. K-values are increased with relaxation progression and have shown some differences between in $LincLITE^{(R)}$ and conventional fabrics, and feeder blended fabrics. Loop shape factor is highly affected by tightness factor, relaxation and feeder blending in $LincLITE^{(R)}$ fabrics, whereas twist factor not significantly effects on loop shape factor in conventional fabrics. Stitch density significantly increases with relaxation in conventional fabrics and no significant effect shows with $LincLITE^{(R)}$ fabrics.

• Journal of Korea Multimedia Society
• /
• v.7 no.12
• /
• pp.1657-1664
• /
• 2004

We propose a method that classifies images into two object types man-made and natural objects. A central object is extracted from each image by using central object extraction method[1] before classification. A central object in an images defined as a set of regions that lies around center of the image and has significant color distribution against its surrounding. We define three measures to classify the object images. The first measure is energy of edge direction histogram. The energy is calculated based on the direction of only non-circular edges. The second measure is an energy difference along directions in Gabor filter dictionary. Maximum and minimum energy along directions in Gabor filter dictionary are selected and the energy difference is computed as the ratio of the maximum to the minimum value. The last one is a shape of an object, which is also represented by Gabor filter dictionary. Gabor filter dictionary for the shape of an object differs from the one for the texture in an object in which the former is computed from a binarized object image. Each measure is combined by using majority rule tin which decisions are made by the majority. A test with 600 images shows a classification accuracy of 86%.

• Journal of the Korean Society of Visualization
• /
• v.12 no.1
• /
• pp.30-34
• /
• 2014

Bluff bodies under the external periodic force vibrate at their own natural or forced frequency. Rectangular bodies or similar structures such as high-rise towers and apartments, and recently a well-cited application - offshore floating bodies, usually needs to reduce these vibrations for stability and the mode control. Therefore, this study is aiming to reduce or control the vibration of a structure by a passive control method, i.e., TLCD (Tuned Liquid Column Damper). Controlling a moving body with a TLCD based on a variety of the orifice shape has been preliminary studied. In order to get a proper control, an optimized study is made on the design of the orifice shape, which has internal plates with the holes. The results show the force acting on the body due to the periodic movement highly depends on the number of holes on the plate and the height of the water level. Therefore, the optimum shape of the orifice and the height of the water level should be confirmed by a series of experiments.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.8
• /
• pp.449-456
• /
• 2002

3D Equivalent magnetic Circuit Network Method (EMCNM) is comparatively the easy way that analyzes 3D models of Electric Machine by using permeance as a distributive magnetic circuit parameter under the existing magnetic equivalent circuit method and Numerical Method. The existing 3D EMCNM could not correctly describe the shape of an analysis target when using rectangular shape element or fan shape element, so it made errors when calculating permeance. Therefore, this paper proposes the trapezoidal element contained rectangular element, fan-shape element, and quadrilateral element to express a shape. The proposed method in this research was confirmed as a useful and an accurate method through comparing with the analysis result of SRM model that is sufficiently guaranteed by 2D-Analysis.

• International Journal of Aeronautical and Space Sciences
• /
• v.8 no.1
• /
• pp.66-78
• /
• 2007

A multi-point aerodynamic shape optimization technique has been developed for helicopter rotor blades in hover based on a continuous adjoint method on unstructured meshes. The Euler flow solver and the continuous adjoint sensitivity analysis were formulated on the rotating frame of reference. The 'objective function and the sensitivity were obtained as a weighted sum of the values at each design point. The blade section contour was modified by using the Hicks-Henne shape functions. The mesh movement due to the blade geometry change was achieved by using a spring analogy. In order to handle the repeated evaluation of the design cycle efficiently, the flow and adjoint solvers were parallelized based on a domain decomposition strategy. A solution-adaptive mesh refinement technique was adopted for the accurate capturing of the wake. Applications were made to the aerodynamic shape optimization of the Caradonna-Tung rotor blades and the UH-60 rotor blades in hover.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.1
• /
• pp.101-107
• /
• 2005

The objective of this study is structural analysis and optimum shape of rope brake. The finite element model was implemented to compute the stress, strain and friction force for rope brake. The ANSYS code was used for this analysis. Structural analysis are effected by position and height of reinforcement figure. The structural safety was examined by an establishment angle of the rope brakes which made apply to housing of the most suitable shape. The optimum shape of the rope brake was decided after stress and strain results were compared and examined.

• International Journal of Aeronautical and Space Sciences
• /
• v.4 no.1
• /
• pp.45-52
• /
• 2003

A three-dimensional aerodynamic shape optimization technique in inviscid compressible flows is developed by using a parallel continuous adjoint formulation on unstructured meshes. A new surface mesh modification method is proposed to overcome difficulties related to patch-level remeshing for unstructured meshes, and the effect of design sections on aerodynamic shape optimization is examined. Applications are made to three-dimensional wave drag minimization problems including an ONERA M6 wing and the EGLIN wing-pylon-store configuration. The results show that the present method is robust and highly efficient for the shape optimization of aerodynamic configurations, independent of the number of design variables used.

• ETRI Journal
• /
• v.26 no.2
• /
• pp.122-135
• /
• 2004

Although frame-based MPEG-4 video services have been successfully deployed since 2000, MPEG-4 video coding is now facing great competition in becoming a dominant player in the market. Object-based coding is one of the key functionalities of MPEG-4 video coding. Real-time object-based video encoding is also important for multimedia broadcasting for the near future. Object-based video services using MPEG-4 have not yet made a successful debut due to several reasons. One of the critical problems is the coding complexity of object-based video coding over frame-based video coding. Since a video object is described with an arbitrary shape, the bitstream contains not only motion and texture data but also shape data. This has introduced additional complexity to the decoder side as well as to the encoder side. In this paper, we have analyzed the current MPEG-4 video encoding tools and proposed efficient coding technologies that reduce the complexity of the encoder. Using the proposed coding schemes, we have obtained a 56 percent reduction in shape-coding complexity over the MPEG-4 video reference software (Microsoft version, 2000 edition).

• Korean Journal of Community Nutrition
• /
• v.3 no.2
• /
• pp.308-316
• /
• 1998

This study was made to find out the relationship between the eating attitude influenced by an eating disorder and nutritional knowledge among 441 female college students. A self-report questionnaire was used, and the summary of the results are as follows : Almost all of the surveyed female college students were in criteria of standard weight, however they regard themselves more obese than what their actual body shape normally shows. The correlation between perceived body shape and the eating attitude influenced by an eating disorder turned out to be high(p<0.001). The significant level of correlation between the perceived body shape and the eating attitude test-26(EAT-26) scores showed much higher than that obtained between actual shape, degree of obesity and eating attitude test-26(EAT 26) scores(p<0.001). There was no significant level of correlation between the defree of obesity and the average score of nutritional knowledge obtained out of the total questionnaire, however it showed significant level of correlation between macronutrient and roughage(p<0.05), fat and calorie requirement(p<0.01). There was significant correlation among perceived body shape, actual weight and eating attitude influenced. by an eating disorder. Thus the correct perception of body shape turned out to be an important factor in obtaining the desirable eating attitude and adequate nutritional knowldege.