• Computers and Concrete
• /
• v.31 no.5
• /
• pp.433-442
• /
• 2023

This study presents the visually observed behavior of fibers embedded in concrete samples that were subjected to a flexural bending test. Three types of fibers such as macro polypropylene, macro polyethylene, and the hybrid of steel and polyvinyl alcohol were mixed with cement by a designated mix ratio to prepare a total of nine specimens of each. The bending test was conducted by following ASTM C1609 with a net deflection of 2, 4, and 7 mm. The X-ray computed tomography (XCT) was carried out for 7 mm-deflection specimens. The original XCT images were post-processed to denoise the beam-hardening effect. Then, fiber, crack, and void were semi-manually segmented. The hybrid specimen showed the highest toughness compared to the other two types. Debonding based on 2D XCT sliced images was commonly observed for all three groups. The cement matrix near the crack surface often involved partially localized breakage in conjunction with debonding. The pullout was predominant for steel fibers that were partially slipped toward the crack. Crack bridging and rupture were not found presumably due to the image resolution and the level of energy dissipation for poly-fibers, while the XCT imaging was advantageous in evaluating the distribution and behavior of various fibers upon bending for fiber-reinforced concrete beam elements.

• Journal of Animal Science and Technology
• /
• v.65 no.3
• /
• pp.479-489
• /
• 2023

Livestock production depends on the utilization of nutrients, and when this is accomplished, there is accelerated momentum toward growth with a low cost-to-feed ratio. Public concern over the consumption of pork with antibiotic residues in animals fed antibiotic growth promoters (AGP) has paved the way for using other natural additives to antibiotics, such as herbs and their products, probiotics, prebiotics, etc. Numerous feed additives are trending to achieve this goal, and a classic example is vitamins and minerals. Vitamins and minerals represent a relatively small percentage of the diet, but they are critical to animal health, well-being, and performance; both play a well-defined role in metabolism, and their requirements can vary depending on the physiological stage of the animals. At the same time, the absence of these vitamins and minerals in animal feed can impair the growth and development of muscles and bones. Most commercial feeds contain vitamins and trace minerals that meet nutrient requirements recommended by National Research Council and animal feeding standards. However, the potential variability and bioavailability of vitamins and trace elements in animal feeds remain controversial because daily feed intake varies, and vitamins are degraded by transportation, storage, and processing. Accordingly, the requirement for vitamins and minerals may need to be adjusted to reflect increased production levels, yet the information presented on this topic is still limited. Therefore, this review focuses on the role and function of different sources of minerals, the mode of action, the general need for micro and macro minerals in non-ruminant diets, and how they improve animal performance.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.4
• /
• pp.471-477
• /
• 2010

Although the roles of calcium in plant are widely known, little is known about on an antagonistic effect of macro elements, oxalate biosynthesis and main shape of crystal in cucumber plant organs. Seeds of cucumber (Cucumis sativus cv. Ijoeunbackdadagi) were germinated in perlite tray supplied with distilled-deionized water. Seedlings were transplanted into aerated containers with a half strength of Ross nutrient solution. Ca levels treated in media were as follows; No-Ca, $Ca(NO_3)_2$ 0.25, 1.25 and 2.5 mmol $L^{-1}$, and $Ca(NO_3)_2$ 2.5 mmol $L^{-1}$ + $CaCl_210$, 25 and 50 mmol $L^{-1}$. Ca-deficient and -excessive conditions severely reduced cucumber growth, as compared to the control, and adversely affected an accumulation of macro elements (N, P, K, and Mg). Calcium favorably induced oxalate (acid-soluble) synthesis in leaves and roots of cucumber plant, but not in stem. Acid-soluble oxalate contents in leaves proportionally increased with Ca supply levels (0.91, P<0.001), however, this pattern was not observed in stem and roots. Ca-oxalate crystal formation and compositional analysis were examined using SEM-EDS technique in cucumber leaves. The main type of crystal revealed a prismatic crystal and main components were Ca, Na and Cl.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.5
• /
• pp.358-364
• /
• 2001

To obtain information for the proper fertilization management of cut-flower roses, the amount of macro and micro elements absorbed by cut-flower roses from soil for a year was investigated. Three cut-flower rose cultivars which are called 'Grandgara', 'Nobless', and 'Centina' were transplanted to a sandy loam soil, N-P-K standard fertilization was applied to the soil, and drip irrigation was done at the level of 10 kPa soil moisture tension. There was not significantly different in the harvest amount of cut-flower rose between 'Grandgara' and 'Nobless', but the harvest yield of 'Centina' was about 63% level when compared to that of 'Grandgara'. Considering seasonal changes in the content of nutrients in plant, parts, the uptake of untrients was higher in winter season than that in spring and summer seasons. Except for 'Centina', the nutrient amount removed from plant parts of 'Grandgara' and 'Nobless' increased with the sequence of floral part < stem < leaf, indicating that it is more dependent on biomass yield than on the content of nutrients in each plant part. The ratio of N/K amount absorbed by 'Nobless' and 'Centina' was 1.13 and 1.28. respectively, lower than 1.68 of 'Grandgara', showing that the requirement for K is greater in 'Nobless' and 'Centina' than in 'Grandgara'. The use efficiency of nutrients by cut-flower roses ranged from 39 to 64% in nitrogen, 5 to 9% in phosphorus, and 37 to 67% in potassium. It suggests that the requirement for P in cut-flower roses is very low.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.1
• /
• pp.15-22
• /
• 2010

These investigations were conducted to standardize several chemical and physical environments affecting in vitro propagation of gametophytes of Climacium japonicum. Propagation of this moss species was established on basal medium containing Knop macro salts and Nitsch and Nitsch trace elements. Primary cultures were initiated from apical shoots of gametophytes. Gametophyte production was accessed using chopped gametophytes, apical shoots and basal shoots. Seven ty pes of culture media and four concentrations of total nitrogen and five strengths of sucrose were tested for in vitro gametophyte production. Light and temperature factors were also evaluated. Apical shoots were the greatest among three types explants used for gametophyte propagation. Medium containing Knop macro salts and Nitsch and Nitsch trace elements was more effective than other types of media. Higher sucrose concentrations showed a positive effect on the elongation and multiplication of gametophytes. Both nitrogen deficiency and excessiveness inhibited gametophyte growth. Light intensity variation showed highly significant changes in numbers, length and fresh weight of gametophytes. Optimum light intensity for gametophyte growth seemed to be around 3000-4000 lx. Both lower and higher temperature had a negative effect on gametophyte propagation and production. This study will provide large scale and high quality propagules, and effective moss propagation system.

• Horticultural Science & Technology
• /
• v.28 no.5
• /
• pp.836-844
• /
• 2010

This study was carried out to investigate plant characteristics and nutritional components of the genetically modified (GM) Chinese cabbage and its control line grown in the central and northern parts of Korea in order to establish the evaluating protocol and standard assessment. The GM and non-GM Chinese cabbage was planted with normal and concentrated density at two locations in spring and fall of 2008 and 2009. From the statistic analysis on plant characteristics and nutritional components, there were not many significant differences between GM and non-GM Chinese cabbage. Only few differences in the plant characteristics were found between the dense and normal planting. In the dense planting, there was no significant difference between GM and non-GM Chinese cabbages except for three out of 18 plant traits, such as leaf shape, hairiness and midrib length. On the other hand, nine plant traits including leaf length, leaf width, leaf color, leaf shape, fresh weigh of ground part, number of leaf, midrib length, midrib width and root diameter were slightly different between GM and non-GM Chinese cabbage in the normal planting. In case of leaf length, midrib length, midrib width and fresh weigh of ground part, there were significantly differences not only between two lines, but also between two locations. From nutritional component analysis, only five fatty acids were identified in the Chinese cabbage: palmitic acid, oleic acid, stearic acid, linoleic acid and linolenic acid. Except linoleic acid, four fatty acids in one gram of dried sample from GM line were little higher than those from non-GM line. However, there were no significant differences in total contents of fatty acids not only between GM and non-GM Chinese cabbage line, but also between northern and central cultivating areas in the normal and dense planting. According to the composition of inorganic elements identified in the samples from both lines, there were six macro-elements, such as N, P, Ca, K, Mg and Na, and four micro-elements, Cu, Fe, Mn and Zn. Based on the result from PCA analysis, specific clusters were not found between GM Chinese cabbage and the control line, but found between two regions.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.3
• /
• pp.173-177
• /
• 2006

Terminal buds and young leaves of Kalopanax pictus are in a great demand as a edible vegetable. Its bark of stems and roots have been used as the resources of folk medicine in Korea. Recently, attempts to cultivate the plant have being tried in farms and mountain villages. This study was conducted to determine effect of inorganic elements on seedlings growth of K. pictus. Levels of inorganic elements in the leaves were variable based on macro and micro inorganic elements. Among the inorganic elements in the leaves of K. pictus seedlings, level of N was high, while other ions were low in the order of K, Ca, P, Mg, Mn, Fe and Zn. A highly significant correlations between the seedling growth and the level of N, P, K, and Na in the leaves, while a low positive significant correlations between the growth and the level of either Mg or Mn and no significant correlations between the growth and the level of Ca, Fe, Cu, and Zn. The most affecting inorganic ion on the seedling growth was N, and followed by the order of K, P, Mg, Mn and Na.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.1
• /
• pp.57-71
• /
• 2007

While a concept on biotop or the urgency of its classification systems have been under discussion recently, this study aims to examine outdoor biotop classification systems for environment-friendly community. To this end, the feasibility of creating a biotop in the community and application elements were generated and biotops were classified and categorized. Then, elements that can be applied in consideration of traditional Korean techniques were generated and biotop classification systems and specific components in residential areas were reviewed. As for the result of this study, based on a preliminary draft prepared through literature review, considerations for biotop classification systems were taken into account. Then, based on classification criteria for biotop formats, biotop functions and biotop types, a second-tier classification system was developed. Criteria for biotop formats included surfaces, lines and points while criteria for biotop functions were large cores, small bases, corridors, stepping stones and ecological islands. Criteria for habitat types were divided to include natural forest, developed green areas, lacustrine wetland, palustrine wetland, shrubs, grasslands, linear habitats, vacant plots and practical green areas, which were sub-categorized. As for the biotop classification system, macro-classification divided biotops into three types-space, line and point-based on biotop formats. Meso-classification had five groups and micro-classification had 21 groups based on habitat types. Future studies should focus on the ecological features of each biotop categories generated in this study and their creation and management techniques to find many practical methods to create, protect and manage outdoor biotop for environment-friendly community.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.1
• /
• pp.87-95
• /
• 2012

In recent years, laser-arc hybrid welding has begun to be adopted for assembly welding of automotive bodies and parts, because the hybrid welding process can weld lapped steel sheets having a larger gap than is possible with laser welding. In this paper, to predict the twist deformation by the hybrid welding when brackets are welded in B pillar of a passenger car, the residual stress using CAE is analyzed and the deformation result of CAE is compared with the measured deformation. First of all, after modeling heat source as intended to be expressed with laser-arc hybrid welding method, heat source fitting is done with welding conditions and a section of welding part obtained through specimen test. In case of heat source functions, laser used conical source and arc used double ellipsoid source. Through the local model analysis, elements which are located in the center of the model are selected. The elements are called WME(Welding Macro Element). This WME is extruded in the welding lines and welding phenomenon of complex parts is accomplished. The deformation amount after hybrid welding is got through a simulation, the validity of simulation is verified by measuring the panel and comparing with the simulation result.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.2
• /
• pp.179-186
• /
• 1995

In the present study, nutritional status of some minerals in sheep grazed on native pasture was investigated in dry area, Ningxia district, of the People's Republic of China. Samples of some forages and blood of sheep were collected for two seasons, dry (March) and rainy (August) seasons. The Ca contents of forages (wheat straw, green-pea straw and some wild grasses) were relatively high as compared with that required ordinarily as standard, but on the contrary, the P content was much lower than that of standard. Consequently, Ca/P ratio was very high in cost of the roughages sampled in the region. Trace elements, Cu and Zn, content of forage samples were fairly low, and the contents of Mo and Fe were fairly high, particularly in some wild grasses, when the values were compared with that required normally. The Ca level in blood of sheep was in a range accepted as normal, and the other macro minerals(Mg and P) were contained at relatively high levels as compared with the values observed ordinarily, but not at a toxic level. With trace minerals, the plasma Fe level was extremely high as compared with the standard level, although there were no disorders due to toxicity, and Mo level in plasma was a little lower than the lower limit described as a normal. The plasma levels of other trace elements (Cu, Zn and Se) in all the animals were within the range accepted as normal. There would be no clear differences in mineral nutrition of sheep between dry and rainy seasons. These results could suggest that there is no severe unbalance and/or imbalance, and grazing sheep in the Ningxia area of midland China have no problems relating to the nutritional status of minerals.