• Composites Research
• /
• 제34권1호
• /
• pp.70-75
• /
• 2021

본 논문은 단섬유 칩으로 구성된 Sheet Molding Compound(SMC) 복합재료를 실험적으로 관찰된 특징들을 바탕으로 메소스케일(meso-scale) 대표체적요소(RVE: Representative Volume Element)를 재구성하는 새로운 알고리즘을 제시한다. 전산해석을 이용하여 SMC 복합재료의 비등방성 거동의 정확한 예측은 어려운 문제이다. 이를 극복하기 위해, SMC 복합재료를 위한 일련의 이미지 프로세싱 기술과 재구성 알고리즘 및 유한요소(FE: Finite Element) 생성기로 구성된 SMC RVE 모델을 개발하였다. 첫째, micro-CT 이미지 프로세싱은 SMC 물성에 직접적인 상관관계를 가지는 섬유칩의 배향 및 분산의 확률적 분포를 평가한다. 둘째, 해당 통계적 분포를 바탕으로 섬유칩 간의 겹침효과를 고려한 섬유칩 팩킹 재구성 알고리즘을 개발한다. 마지막으로, SMC 복합재료 멀티스케일 해석을 이용하여 매크로스케일(macro-scale)에서의 거동을 파악하고 실험데이터를 통해 검증을 수행한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.276-279
• /
• 2004

Concrete is one of the principal materials for the structure and it is widely used all over the world. but it shows extremely brittle failure under bending and tensile load. Recently to improve such a poor property. High Performance Fiber Reinforced Cementitious Composites (HPFRCC) have been developed. and it are defined by an ultimate strength higher than their first cracking strength and the formation of multiple cracking during the inelastic deformation process. This study is to develop the hybrid HPFRCC with high ductility and strain capacity in bending and tensile load. and the three-point bending test on hybrid HPRFCC reinforced with micro and macro fibers is carried out in this paper. As the results of the bending tests. hybrid HPFRCCs reinforced with PVA40+SF and PVA100+PVA660 showed the high ultimate bending stress, multiple cracks and displacement hardening under bending load.

• Computers and Concrete
• /
• 제7권4호
• /
• pp.303-315
• /
• 2010

In this paper, we present a new finite Timoshenko beam element with a model for ultimate load computation of reinforced concrete frames. The proposed model combines the descriptions of the diffuse plastic failure in the beam-column followed by the creation of plastic hinges due to the failure or collapse of the concrete and or the re-bars. A modified multi-scale analysis is performed in order to identify the parameters for stress-resultant-based macro model, which is used to described the behavior of the Timoshenko beam element. The micro-scale is described by using the multi-fiber elements with embedded strain discontinuities in mode 1, which would typically be triggered by bending failure mode. A special attention is paid to the influence of the axial force on the bending moment - rotation response, especially for the columns behavior computation.

• 펄프종이기술
• /
• 제31권2호
• /
• pp.86-91
• /
• 1999

A new test method has been developed for a quantitative evaluation of macro-stickies in recycled pulps. The method uses a fine slot screen to separate a sticky particles form fiber in the pulp samples. The obtained sticky particles were spread on filter paper and covered with silicon carbide powder in order to make the stickies area with sufficient contrast between stickies and background. The stickies are then counted by a scanner-based image analysis system. The validity of this evaluation method of stickies of KOCC, ONP and white ledger wastepaper recycling plants respectively. It is shown that this method can be applied for a quantitative determination of stickies content in various recycled pulp samples. With this testing method, reproducible and reliable data were obtained for the actual mill pulp samples.

• Advances in Automotive Engineering
• /
• 제1권1호
• /
• pp.41-59
• /
• 2018

In the study, investigation of fiber- reinforced composite materials that can be an alternative to conventional steel was performed by finite element analysis with the help of software. Steel and composite materials have been studied on a four axle truck chassis model. Three-dimensional finite element model was created with software, and then analyzes were performed. The analyses were performed for static and dynamic/fatigue cases. Fatigue cases are formed with the help of design spectra model and fatigue analyses were performed as static analyses with this design spectra. First, analyses were performed for steel and after that optimization analyses were made for the AS4-PEEK carbon fiber composite and Eglass-Epoxy fiber composite materials. Optimization of composite material analyzes include determining the total laminate thickness, thickness of each ply, orientation of each ply and ply stacking sequence. Analyzes were made according to macro mechanical properties of composite, micromechanics case has not been considered. Improvements in weight reduction up to %50 provided at the end of the composite optimization analyzes with satisfying stiffness performance of chassis. Fatigue strength of the composite structure depends on various factors such as, fiber orientation, ply thickness, ply stack sequence, fiber ductility, ductility of the matrix, loading angle. Therefore, the accuracy of theoretical calculations and analyzes should be correlated by testing.

• Journal of the Optical Society of Korea
• /
• 제7권2호
• /
• pp.72-78
• /
• 2003

It is reported that the spectral loss of photonic crystal fiber (PCF) having a large hole-to-hole distance (~ 10 ${\mu}{\textrm}{m}$) is sensitive to micro- and macrobending when compared with the conventional single-mode fiber. In this paper, we will present the measurement result of the macro- and microbending characteristics of fabricated PCF with large hole-to-hole distance (> 10 ${\mu}{\textrm}{m}$) . For the macrobending experiment, the fiber was simply wound around a circular structure with variable diameter that could be reduced to a few centimeters. For the microbending case, regularly spaced silica rods were attached on a slide glass and pressed against the fiber by loading a stack of metal plates of known weight on the glass. The transmission loss spectrum shows a rather flat response to the to microbending, and this makes the PCF a good candidate for a wideband variable optical attenuator.

• 대한기계학회논문집A
• /
• 제26권5호
• /
• pp.960-968
• /
• 2002

In this research, the effects of fiber stacking sequence on damage behaviors of FML(Fiber Metal Laminates) subject to indentation loading. SOP (Singly Oriented Ply) FML and angle ply FML were fabricated to study fiber orientation effects and angle ply effects. FML were fabricated by using 1050 aluminum laminate and carbon/epoxy prepreg. To increase adhesive bonding strength, Al laminate was etched using FPL methods. The static indentation test were conducted by using UTM under the 2side clamped conditions. During the tests, load and displacement curve and crack initiation and propagation behaviors were investigated. As fiber orientation angle increases, the crack initiation load of SOP FML increases because the stiffness induced by fiber orientation is increased. The penetration load of SOP FML is influenced by the deformation tendency and boundary conditions. However, the macro-crack of angle ply FML was initiated by fiber breakage of lower ply because angle plies in Angle ply FML prevents the crack growth and consolidation. The Angle ply FML has a critical cross-angle which prevent crack growth and consolidation. Damage behavior of Angle ply FML is changed around the critical cross-angle.

• Computers and Concrete
• /
• 제26권5호
• /
• pp.451-465
• /
• 2020

This paper presents experimental and numerical investigations on mechanical properties of ultra-high-performance fiber-reinforced concrete (UHPFRC) with four types of steel fibers; micro steel (MS), crimped (C), round crimped (RC) and hooked-end (H), in two fiber contents of 1% and 2% (by volume) and two lengths of 13 and 30 mm. Compression, direct tension, and four-point bending tests were carried out on four types of specimens (prism, cube, dog-bone and cylinder), to study tensile and flexural strength, fracture energy and modulus of elasticity. Results were compared with UHPC specimens without fibers, as well as with available equations for the modulus of elasticity. Specimens with MS fibers had the best performance for all mechanical properties. Among macro fibers, RC had better overall performance than H and C fibers. Increased fibers improved all mechanical properties of UHPFRC, except for modulus of elasticity, which saw a negligible effect (mostly less than 10%). Moreover, nonlinear finite element simulations successfully captured flexural response of UHPFRC prisms. Finally, nonlinear regression models provided reasonably well predictions of flexural load-deflection behavior of tested specimens (coefficient of correlation, R² over 0.90).

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.753-756
• /
• 2008

일반 콘크리트에 비해 상대적으로 높은 인성과 연성의 특징을 갖는 HPFRCC는 과도한 하중을 받는 구조 부재 혹은, 내구적으로 취약한 부재 등에 사용될 수 있으며, 기존의 연구에 의하면 PVA섬유를 이용한 HPFRCC의 경우 혼입률 2%에서 가장 높은 휨 성능이 나타난다고 알려져 있다. 이에 본 연구에서는 길이가 다른 두 종류의 PVA 섬유를 사용하여 상대적으로 짧은 섬유는 작은 균열(microcrack)을, 상대적으로 긴 섬유는 큰 균열(macrocrack)을 보다 효과적으로 제어하는 최적혼입비를 찾기 위하여 전체 PVA 혼입률을 2%로 고정시킨 채 두 섬유의 혼입률을 달리하여 각 혼입비에 따른 압축 및 휨 강도 테스트를 실시하였다. 또한 강섬유와 PVA 섬유를 동시에 하이브리드 보강한 콘크리트 부재에 대해서도 같은 실험을 실시하여 비교 분석하여 가장 높은 휨 성능을 나타낼 수 있는 최적배합을 찾고자 한다. 실험 결과 1.6%의 단섬유(12mm)와 0.4%의 장섬유(30mm)로 이루어진 시편에서 가장 높은 휨 성능을 보였으며, 2%의 PVA 섬유가 혼입된 부재에 대하여 소량의 강섬유 혼입 시 휨 성능이 다소 향상 되지만 많은 혼입량은 오히려 휨 성능의 저하를 초래하였다.

• 전자공학회논문지D
• /
• 제34D권11호
• /
• pp.54-63
• /
• 1997

The 1-D finite-element mehtod is applied for designing double-clad otpical fibers with dispersion-compensation capability. design parameters allowing only a $LP_{01}$ single mode are treated and macro-bending loss are taken into consideration. Design parameters are extracted to have the compensation ratio $(L_{SMF}/L_{DCF})$ of 6.2 for core structure with step-index profile, and of 5.2 for core with triangular-index profile.