• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.233-244
• /
• 2004

ZnO epilayer were synthesized by the pulesd laser deposition(PLD) process on $Al_2O_3$ substrate after irradiating the surface of the ZnO sintered pellet by the ArF(193nm) excimer laser. The epilayers of ZnO were achieved on sapphire ($Al_2O_3$)substrate at a temperature of $400^{\circ}C$. The crystalline structure of epilayer was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of ZnO epilayer measured with Hall effect by van der Pauw method are $8.27{\times}10^{16}\;cm^{-3}$ and $299\;{\textrm}cm^2/V.s$ at 293K. respectively. The temperature dependence of the energy band gap of the ZnO obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)\;=\;3.3973\;eV\;-\;(2.69{\times}10^{-4}\;eV/K)T^2/(T+463K)$. After the as-grown ZnO epilayer was annealed in Zn atmospheres, oxygen and vaccum the origin of point defects of ZnO atmospheres has been investigated by the photoluminescence(PL) at 10K. The native defects of $V_{zn},\;Vo,\;Zn_{int},\;and\;O_{int}$ obtained by PL measurements were classified as a donors or acceptors type. In addition, we concluded that the heat-treatment in the oxygen atmosphere converted ZnO thin films to an optical p-type. Also, we confirmed that vacuum in $ZnO/Al_2O_3$ did not form the native defects because vacuum in ZnO thin films existed in the form of stable bonds.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.2
• /
• pp.194-200
• /
• 2009

The extruder type is classified as screw type and non-screw type in terms of the extrusion method. The screw type extruder, which is the most frequently used, is classified as the single screw extruder and the multi-screw extruder. They are classified as vertical type and horizontal type in terms of structure; and those for compounding and for forming in terms of function. The single screw extruder is a universal extruder, most of which is suitable for the extrusion forming of thermoplastic resin. The multi-screw(two-screw, three-screw and four-screw) extruder can increase the extrusion power using the engagement of the screw flank. The single screw extruder does not have a good mixing ratio of the raw material and stable extrusion power, while it has low construction cost and operation cost. In this study, the single screw extruder, which has many weak points compared with the multi-screw extruder, was studied. There have been many studies on the single screw extruder, and they led to its significant development. The existing study method, however, had complex analysis processes and required much time. In this study, the CFD was applied to the performance test and analysis of the extruder, and the optimal design condition of the extrusion power for the screw and die of the single screw extruder was found by comparing the analysis results with the actual performance measurement of the single screw extruder.

• The Journal of Korean Medicine
• /
• v.28 no.2 s.70
• /
• pp.114-125
• /
• 2007

Objectives : Uterine myoma is the most common pelvic benign tumor and may cause abnormal menstrual pattern. The growth of uterine myoma depends on hormones. The 7-zone-diagnostic system (CP-6000A) is a measuring system using skin resistance variability (SRV). The machine shows organic energy and was reported by the gynecologic department to detect functional abnormality of hypothalamus-hypophysis-ovarian axis (H-P-O). Our study was to investigate the SRV of women with uterine myoma by the 7-zone diagnostic system. Methods: Two groups were selected from those who took the CP-6000A test in the College of Korean Medicine Hospital of Sangji University from March 2003 to September 2006. They were divided into normal control (n=40) and uterine myoma groups (n=40). Electrodermal activity of the two groups was compared. Results : The mean value of electrodermal activity of the uterine myoma group was lower than that of thenormal group in all areas on first and second measurement. Especially, the mean value of the patient group was significantly lower than that of the normal group and fell below normal range in the 1, 2, and 3 areas on first and second measurement. Conclusions : The results suggest that women with uterine myoma may have organic energy deficiency and functional abnormality of the H-P-O axis. Further studies to determine the feasibility of this 7 -zone diagnostic system as a reliable diagnostic tool are needed.

• Journal of Korea Multimedia Society
• /
• v.16 no.4
• /
• pp.502-509
• /
• 2013

In Information age, The academic liberal art computer education course set up goals to promote computer literacy and develop the ability to cope with changes in information society and improve productivity and national competitiveness. In this paper, we analyze on discovering of decisive variable and satisfaction index to have a influence on computer education on university students. As a preprocessing course, the proposed method selects optimum variable using correlation based feature selection(CFS) of machine learning tool based on Java and we calculate weighted value for each variable and then, we generate the optimal variable using weighted value based on fuzzy decision making method. we proposed Fuzzy decision making method in analysis of the academic liberal art computer education satisfaction index data and checked the accuracy of the satisfaction evaluation by using recall and precision.

• International Journal of Fluid Machinery and Systems
• /
• v.2 no.4
• /
• pp.353-362
• /
• 2009

In the process of turbine modernizations, the investigation of the influences of water passage roughness on radial flow machine performance is crucial and validates the efficiency step up between reduced scale model and prototype. This study presents the specific losses per component of a Francis turbine, which are estimated by CFD simulation. Simulations are performed for different water passage surface roughness heights, which represents the equivalent sand grain roughness height. As a result, the boundary layer logarithmic velocity profile still exists for rough walls, but moves closer to the wall. Consequently, the wall friction depends not only on roughness height but also on its shape and distribution. The specific losses are determined by CFD numerical simulations for each component of the prototype, taking into account its own specific sand grain roughness height. The model efficiency step up between reduced scale model and prototype value is finally computed by the assessment of specific losses on prototype and by evaluating specific losses for a reduced scale model with smooth walls. Furthermore, surveys of rough walls of each component were performed during the geometry recovery on the prototype and comparisons are made with experimental data from the EPFL Laboratory for Hydraulic Machines reduced scale model measurements. This study underlines that if rough walls are considered, the CFD approach estimates well the local friction loss coefficient. It is clear that by considering sand grain roughness heights in CFD simulations, its forms a significant part of the global performance estimation. The availability of the efficiency field measurements provides an unique opportunity to assess the CFD method in view of a systematic approach for turbine modernization step up evaluation. Moreover, this paper states that CFD is a very promising tool for future evaluation of turbine performance transposition from the scale model to the prototype.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.9
• /
• pp.1085-1098
• /
• 2011

In the $21^{st}$ century, technology is a tool for the expansion of the five senses and physical ability that works as an element for posthuman identity. This study analyzes and theorizes on the characteristics of the posthuman body in fashion illustration. The method of this study analyzes documentaries about posthuman and fashion illustration. The results are as follow. Posthuman body types are classed as hybrid body, plastic surgery body, and digital body. The characteristics of the posthuman body are categorized as ultra- functional prosthetic, mythical undifferentiated, radical plastic surgery type and post-physical digitization type. The ultra-functional prosthetic type shows a restored body and upgraded functional body through a machine hybrid, cyborg suit and mannequin hybrid. It is a break from classical gender identity to form a nerve sense extension that displays physical and abstract power. The mythical undifferentiated type shows a therianthropic form, parts of an animal body, radical skin and gender bending. It represents the return to an undifferentiated world, the desire of a powerful being and the possibility of radical transformation. The radical plastic surgery type shows a photomontage of an ideal body, transgendered body, grotesque body marking, absence of partial or overall face organ and the expansion of abnormal body organs. It represents the expression of narcissism, unconscious desire, fantasy, fear and suggests an alternative ideality, sexual attachment and ambiguous gender identity. The post-physical digitization type shows an imperfect form or duplicated ego image through the omission of the body silhouette or detailed form, fragmented image using net, representative self like optical illusion using typography, an imperfect vague silhouette and immaterial body outline through the use of virtual light. It represents the lack of desire, narcissism, fluidity in a virtual space, the continued creation of a new self, ambiguous gender identity and the liberation of environment, sex, and race. Likewise, the posthuman in fashion illustration shows the absence of a species boundary, destruction of classical gender identity, a new personality and virtual self image.

• Design & Manufacturing
• /
• v.12 no.2
• /
• pp.16-21
• /
• 2018

Recently, as the demand for high-precision parts increases due to industrial development, a machine tool system for ultra-precision machining and polishing has been actively developed. As a result, there is an increasing demand for ultra-precision surface roughness along with dimensional processing. However, due to the increase in processing time due to the demand for ultra-precise surfaces and enormous facility investment, it is difficult to secure competitiveness. The polishing process using the abrasive film in super precision machining has been applied to machines, electronic devices, aerospace, and medical fields. Super finishing using the abrasive film which is applied in the industrial field recently can achieve high surface roughness in a short time. Super finishing using the abrasive film which is applied in the industrial field recently can achieve high surface roughness in a short time. Also, application of industrial field is increasing due to advantages such as low noise and low dust. Recently, researches on stainless steel having strong resistance to corrosion, heat resistance, heat resistance, toughness and weldability have been actively conducted with respect to the nuclear energy industry or marine development. Therefore, in this study, surface roughness and residual stress were measured after SUS304 polishing using dynamic analysis of film polishing apparatus and polishing film.

• Proceedings of the Korean Society for Language and Information Conference
• /
• 2007.11a
• /
• pp.489-497
• /
• 2007

Named entity translation plays an important role in many applications, such as information retrieval and machine translation. In this paper, we focus on translating person names, the most common type of name entity in Korean-Chinese cross language information retrieval (KCIR). Unlike other languages, Chinese uses characters (ideographs), which makes person name translation difficult because one syllable may map to several Chinese characters. We propose an effective hybrid person name translation method to improve the performance of KCIR. First, we use Wikipedia as a translation tool based on the inter-language links between the Korean edition and the Chinese or English editions. Second, we adopt the Naver people search engine to find the query name's Chinese or English translation. Third, we extract Korean-English transliteration pairs from Google snippets, and then search for the English-Chinese transliteration in the database of Taiwan's Central News Agency or in Google. The performance of KCIR using our method is over five times better than that of a dictionary-based system. The mean average precision is 0.3490 and the average recall is 0.7534. The method can deal with Chinese, Japanese, Korean, as well as non-CJK person name translation from Korean to Chinese. Hence, it substantially improves the performance of KCIR.

• Transactions of Materials Processing
• /
• v.17 no.2
• /
• pp.124-129
• /
• 2008

Net shape forging technologies give many effects into the costs and qualities for the finished products. So, the studies to reduce the additional machining amount are very important in forging industry. Specially, there are two main topics in cold forging industry, such as, tool life and precision forging. In this study, new forging technique was proposed to eliminate the machining process for fixing up the length and improve the lead accuracy of gear. The luck-up hub is manufactured through many processes, such as upsetting, piercing and direct extrusion. The gear is formed in direct extrusion process; however, lead accuracy of the gear is over allowance limit. Therefore, the additional sizing process must be added. In this study, process design for closed-die forging of a lock-up hub used for a component of automobile transmission was made using three-dimensional finite element simulations, and the strain distributions and velocity distributions are investigated through the post processor. The rigid-plastic finite-element method for back pressure forging has been used in order to reduce development time and die cost. Using the FEM simulation, we found the optimum value of back pressure. The prototypes of lock-up hub parts were forged into the net-shape. In the experiment, lead precision of tooth are measured by the CCMM(Contact Coordinate Measuring Machine). The dimensional accuracy of forged part was improved up to the 40% when back press was applied.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3066-3073
• /
• 2009

Joint paths of master and branch pipes are induced mathematically for many kinds of joint patterns between both pipes in 3-axis pipe profile-cutting machines. By compensating them with a kerf width, the real cutting paths are determined, and their CL-data are generated, and the tool paths generated by CL-data are verified by a ghost function. A bevelling of welds is implemented through tilting a cutting torch in the $\beta$-axis direction for 8 sections in the chuck rotation of $\alpha$-axis. A PLC controls simultaneously position and velocity in a real time for $\alpha$, X, $\beta$-axis by loading CL-data generated. We developed the PLC-controlled 3-axis pipe profile-cutting system which can cut a master or branch pipe along the cutting path and simultaneously do a bevelling process.