• 대한환경공학회지
• /
• 제32권11호
• /
• pp.1001-1010
• /
• 2010

광주지역 다중이용시설 54개소와 공중이용시설 15개소에 대한 입자상물질(미세먼지, 석면), 가스상물질($CO_2$, CO, $NO_2$, HCHO, Rn, VOCs), 총부유세균의 농도에 대해서 조사하고 각 항목간의 상관성분석을 실시하였다. 미세먼지($PM_{10}$)는 실내주차장에서 평균 $69.2\;{\mu}g/m^3$로 가장 높았고, 이어서 보육시설, 대규모점포, 지하역사 순이었다. 일산화탄소는 실내주차장에서 평균 2.7 ppm으로 가장 높았고, 이산화탄소는 의료시설에서 604.1 ppm으로 가장 높았으며, 이산화질소는 실내주차장에서 0.036 ppm으로 가장 높았다. 포름알데하이드는 54개 전체시설에서 기하평균 $3.6\;{\mu}g/m^3$이었으며, 미술관은 $631.8\;{\mu}g/m^3$로 가장 높았다. 휘발성유기화합물질(VOCs)은 모든 시설에서 기하평균 $24.14\;{\mu}g/m^3$이었고, 이 중 톨루엔이 $15.30\;{\mu}g/m^3$로 가장 높았으며, 이어서 자일렌, 에틸벤젠, 벤젠, 스티렌 순으로 조사되었다. 총부유세균은 찜질방에서 평균 $625.3\;CFU/m^3$로 가장 높았고, 보육시설, 의료기관, 대규모점포 순이었다. 석면은 보육시설에서, 라돈은 미술관에서 높은 것으로 조사되었다. 보육시설에서 미세먼지와 총부유세균은 로그함수의 결정계수($R^2$) 0.5332로 양의 상관성을 보여주었고, 이산화탄소와 일산화탄소는 보육시설과 실내주차장에서 양의 상관성을 보여주었다. 휘발성물질간의 상관식은 모든시설에서 직선함수보다는 로그함수에 의해 잘 설명되었다.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제4권1호
• /
• pp.25-29
• /
• 2000

The present study evaluated the body burden of aromatic VOCs in roadside and underground storekeepers. The Method Detection Limit(MDL) of the analytical system ranged from 0.2 to 0.4$\mu\textrm{g}$/m3 for the target VOCs. The recovery of the sampling system for the compounds was above 80%. For all the target compounds, the breath concentrations of the smokes were similar to or slightly higher than those of the nonsmokers for both the roadside and underground storekeepers. For Ethylbenzene, p-Xylene, and o-Xylene, the breath concentrations of the underground storekeepers were somewhat higher than those of the roadside storekeepers. In contrast, the breath m-xylene concentration of underground storekeepers was similar to that of roadside storekeepers. For both the roadside and underground storekeepers, the breath concentrations prior to and after work were not significantly different.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
• /
• pp.405-408
• /
• 2003

The soild phase microextraction(SPME)fiber which contains 100${\mu}{\textrm}{m}$ polydimethyl siloxane of a stationary phase was used for the analysis of volatile organic compounds contained in aqueous solution. volatile organic compounds, which were spiked in blank water and extracted by the headspace SPME techique, were analyzed by gas chromatography/flame ionization detector(GC/FID). The optimu condition of SPME fiber is determined that the analytes were extracted for 40min from extracts by using PDAfS100${\mu}{\textrm}{m}$ fiber. This new method could have wide application for the analysis of VOCs in aqueous solution.

• KSBB Journal
• /
• 제16권3호
• /
• pp.281-285
• /
• 2001

실험실 규모의 생불여과기에 peat들 패깅하여 휘발성 유기 화합물 (isoprene, dimethyl 야dfide, 블로르포륨, 벤젠, 삼염화에 헬렌, 툴루엔. m-자일렌. 0-자일렌, 스타이렌)의 분해 정도를 가스 처l류시간을 3.2분으로 하여 80일간 측정하였다. 34일의 적응기간이 지난 후 $65~83 g/m^3$로 유입되는 VOC의 분해율 이 $25^{circ}C$액서는 93%이었으나 $45^{circ}C$에서는 여 보다 낮은 73%이었다. $25^{circ}C$에서 77일 후 도달한 최고 세포농도논 초기 농도 의 약 100배인 $1.12\times10^8$세포/g 이었다, 그러나 $45^{circ}C$C에서 도 달한 최고 세포농도는 이의 10분의 1에 불과하였다. m-자이렌과 툴루엔의 분해율 (91 %)에 비하여 벤젠의 분해율 (86%)이 낮았다. 생불여과기의 패정된 부분을 네 구간으로 나누었 을 때 가스가 유입되는 저음 사분회 일에 해당하는 부분에서 VOC의 분해율이 60%에 도달하였다 본 연구는 휘발생 유해 물질 혼합처l를 생붙여과법에 의해 처리하는 것이 가능함을 보여주었고 이러한 기술을 현장에서 배출되는 대기유해풀 칠의 효율적 저감에 적용하면 대기보첸에 기여할 수 있을 것이다.

• Journal of the Korean Wood Science and Technology
• /
• 제42권4호
• /
• pp.357-366
• /
• 2014

백합나무 판재를 벽판재로 이용하기 위해 백합나무의 생재와 건조재에 대한 휘발성유기화합물(VOCs)과 알데히드류 방출 특성을 검토하였다. VOCs 및 formaldehyde를 포함한 aldehyde류의 방출량 측정은 다중이용시설 등의 실내공기질 관리법에 공시된 20 ${\ell}$ Chamber법에 따라 실시하였다. 백합나무의 생재 및 건조재에서는 30여 가지 이상의 VOCs가 검출되었다. 백합나무의 Total VOC 구성 비율 가운데 천연VOC (NVOC)의 비율은 11.1%로 다른 침엽수종과 비교하여 낮게 나타났다. 백합나무의 aldehyde류 분석 결과, 심재 및 변재에서 같은 3종(acetaldehyde, ketone, propionaldehyde)이 검출되었으며, formaldehyde의 방출량은 $4.01{\mu}g/m^3$ 이하로 나타났다. m-Tolualdehyde의 경우 백합나무 건조재의 심재에서만 $33.6{\mu}g/m^3$의 방출량을 보였으며, 심재와 변재 모두 ketone의 방출량이 가장 높게 나타났다. 백합나무 특유의 역한 냄새는 acetaldehyde와 propionaldehyde와 기타 VOCs에 의한 것으로 추정된다. 건조한 백합나무에서는 휘발성이 강한 ketone의 방출량이 증가하였다.

• 한국환경과학회지
• /
• 제16권3호
• /
• pp.385-392
• /
• 2007

Currently, portable equipment for recycling of waste asphalt concrete (ASCON) has been used. However, any air pollution control devices are not attached in the simple portable one. Thus, a lot of air pollutants have been produced from recycling processes of waste ASCON which resulted from aging of paved roads or repavement of roads. This study deals with a preliminary result of concentration analysis of air pollutants obtained from a pilot and a real recycling processes of waste ASCON using simple portable recycling equipment. Air pollutants were taken from 4 steps of the pilot recycling process including an initial heating by liquid petroleum gas (LPG), intermediate heating and melting (H&M) process, final H&M process, and pavement processes using recycled ASCON at the recycling site. Also, air pollutants were taken front 4 steps of the real recycling processes including an initial H&M, final H&M and mixing, loading of recycled ASCON to dump trucks, and at the recycling site after leaving the loaded dump trucks for real pavement sites. The air pollutants measured in this study include volatile organic compounds (VOCs), aldehydes, particulate matter (PM: PM1, PM2.5, PM7, PM10, TSP (total suspended particulate)). The identified concentrations of VOCs increased with increasing time or degree for H&M of waste ASCON. In particular, very high concentrations of the VOCs at the status of complete melting, which is exposed to the air, of the waste ASCON just before paving tv the recycled ASCON at the recycling site. Also, considerable amount of VOCs were identified from the recycling equipment after the dump trucks leaded by recycled ASCON leaved the recycling site for the pavement sites. The relative level of formaldehyde exceeded 80% of the aldehydes Identified in the recycling processes. This is because the waste ASCON is exposed to direct flame of LPG during H&M processes. The PM concentrations measured in the winter recycling processes, such as the loading and rotation processes of waste ASCON into/in the recycling equipment for H&M, were much higher than those in the summer ones. In particular, the concentrations of coarse particles such as PM7 and PM10 during the winter recycling were very high as compared those during the summer one.

• 설비공학논문집
• /
• 제17권6호
• /
• pp.505-513
• /
• 2005

We measured the time-dependent concentration of VOCs emitted from Ondol floor, furniture, and the wall made of various building materials. After obtaining results from the previous measurement, we developed the estimation equations of the concentration decay, and obtained the estimated graphs for the concentration decay under different air change rates and loading factor conditions by using the estimated equations. We conducted our tests by applying our measurements to real residences for 110 days in the case of furniture and for 40 days in the case of the floor. We also conducted experiments in the cases of various wall materials for 7 days which totaled 10 times. We used the GC/FID for experiments for real residences accord-ing to the specified procedures of the NIOSH 1501, and carried out experiments for wall materials according to the specified procedures of the ASTM 5116-97. When conducting experiments for wall materials, we set the temperature and relative humidity at $23^{\circ}C$ and $50\%$, respectively. We also set the air change rate and loading factor at 0.7/h and $1.617 m^2/m^3$, respectively. Our results showed that it is possible to predict proplrly the time-dependent concentration decay of VOCs by using logarithmic functions in both cases of experiments for real residences and for wall materials. Furthermore, we found that the concentration decay rate of VOCs increased rapidly as the air exchange rate increased while the concentration decay rate decreased as the loading factor increased.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.585-588
• /
• 2006

The environment-friendly building material, photocatalyst/scoria/loess concrete, was prepared using scoria and loess (which have merits as building materials) and photocatalyst (which has the functions to compose the environmental contaminants and of self cleaning). In order to apply this material as a building material, the compressive and flexible strengths, and water absorptivity (which have been set by Korea Industrial Standard) were measured. The optimum mixing ratio of photocatalyst/scoria/loess concrete was obtained at the condition of $393kg/m^3$ of coarse aggregate, $802kg/m^3$ of fine aggregate in case of scoria, $80kg/m^3$ of loess, $12kg/m^3$ of photocatalyst, $400kg/m^3$ of cement, and $2kg/m^3$ of AE water reducing agent. The photocatalyst/scoria/loess concrete prepared by above mixing ratio of raw materials showed 25 MPa of compressive strength, $3.8{\sim}4.6$ MPa of flexible strength and $11.4{\sim}12.0%$ of water absorptivity, indicating that the quality of this material was suitable for Korea Industrial Standard (more than 21 MPa for compressive strength, more than 2.0 MPa for flexible strength in case of lightweight aggregate, and less than 15 % for water absorptivity in case of clay brick) for using as a building material.

• 한국산업보건학회지
• /
• 제11권1호
• /
• pp.34-41
• /
• 2001

Passive samplers have been used for personal, indoor, and outdoor air monitoring of VOCs at ppb concentrations in community and office environments. The path length of modified passive sampler was shortened, so it was intended to increase an uptake rate. The performance of the modified 3M 3500 organic vapor monitor(OVM) as a tool for assessing exposures to toxic air pollutants in nonoccupational community environments was evaluated using combined controlled test atmospheres of six selected target volatile organic compounds(VOCs): benzene, methyl tert-butyl ether(MTBE), chloroform, 1,4-dichlorobenzene, tetrachloroethylene, and toluene. The experiments were conducted by exposing the dosimeters to concentrations of $50{\sim}100{\mu}g/m^3$ on six face velocity(0.00, 0.02, 0.06, 0.12, 0.20, 0.30 m/sec) for 24 hours. If the uptake rate was increased, that means that we could use the passive sampler more effectively. The uptake rates were increased linearly according to reduce the path length. Although the diffusion path length was shortened, the change of uptake rate was within ${\pm}25%$ of theoretical value, indicating that the modified passive sampler(TM) can be effectively used over the range of concentrations and environmental conditions tested with a 24-h sampling period if the face velocities were over 0.12 m/s for 6 components of VOCs. But when the face velocities were less than 0.12 m/s, uptake rates were reduced more than expected values. So, the passive sampler with the shortened path length should be used at indoor or outdoor environment where the face velocity should be over about 0.10 m/s. If the path length was shortened more, the uptake rate was more effected by starvation.

• 접착 및 계면
• /
• 제9권1호
• /
• pp.28-34
• /
• 2008

요소 수지와 변성 비닐계 수지의 혼합비에 따라 200 : 0, 180 : 20, 140 : 60, 100 : 100 으로 파티클보드를 제작하였다. 제조된 파티클보드는 변성 비닐계 수지의 비율이 증가수록 함수율과 밀도가 약간 감소하였다. 기계적 특성은 휨강도의 경우 변성 비닐계 수지 첨가로 인해 파티클보드의 전체적인 휨강도는 증가하였으나 박리강도는 약간 감소하였다. VOC Analyzer를 이용하여 방산실험을 한 결과 실험 종료 후, 4 VOCs의 값이 $294{\mu}g/L$, $1435{\mu}g/L$, $1272{\mu}g/L$ 정도로 저감되었다. 또한 FLEC을 이용하여 TVOC, 5 VOCs, 포름알데히드의 방산 실험 결과 요소수지만으로 만들어진 파티클보드의 방산값이 각각 $1.392mg/m^2h$, $0.0259mg/m^2h$, $0.179mg/m^2h$ 정도를 나타내었다. 요소수지와 변성 비닐계 수지의 혼합비를 동일하게 하여 제조된 파티클보드로부터 방산된 경우 $0.235mg/m^2h$, $0.0033mg/m^2h$, $0.105mg/m^2h$ 로 저감되었다.