• 한국수산과학회지
• /
• 제9권1호
• /
• pp.74-78
• /
• 1976

연료분사시기와 회전속도를 일정하게 했을때 3종류의 연료를 사용하여 압축비와 기관의 성능관계를 조사한 결과 다음과 같은 것이 밝혀졌다. 1. 4 cycle디젤기관의 압축비는 기관마력과 연료소자율과의 관계에서 A, B, C 3종류의 연료에 대해 각각 16, 18, 19의 최적압축비가 존재했으며, 이보다 압축비를 높이면 오히려 기관성능이 저하하고 최대출력도 감소한다. 2. 매시공급열량을 일정하게 했을때 연료 A, B에 대해서 16, 18의 최적압축비가 존재했으며 연료 C에 대해서는 정할수 없었다. 따라서 저 cetane number의 연료에서는 출력에 관계없이 가장 좋은 압축비는 결정할 수 없었다. 3. 발화지연은 압축비가 높을 수록 작았고, 감소율은 압축비가 클수록 작았다.

• 센서학회지
• /
• 제28권2호
• /
• pp.106-112
• /
• 2019

Flexible impact force sensors composed of piezoelectric PZT/PDMS composite sandwiched between Al/PET films were fabricated and their voltage signal characteristics were evaluated under varying impact forces for electronic mitt applications. The piezoelectric impact force sensor on an ethylene-vinyl acetate (EVA) substrate exhibited an output voltage difference of no greater than 40 mV a periodical impact test in with the impact load was increased by as much as 240 N by a restoration time of 5 s in a five-time experiment, implying good sensing ability. Moreover, the impact force sensor embedded four electronic mitts showed a reliable sensitivity of less than 1 mV/N and good repeatability under 100 N-impact force during a cycle test executed 10,000 times. This indicated that the fabricated flexible piezoelectric impact sensor could be used in electronic mitt applications. However, the relatively low elastic limit of substrate material such as EVA or poly-urethane slightly deteriorated the sensitivity of the impact sensor embedded electronic mitt at over 200 N-impact forces.

• 한국수소및신에너지학회논문집
• /
• 제33권1호
• /
• pp.95-104
• /
• 2022

Micro hydropower is a readily available renewable energy source that can be harvested utilizing hydrokinetic turbines from shallow water canals, irrigation and industrial channel flows, and run-off river stream flows. These sources generally have low head (<1 m) and low velocity which makes it difficult to harvest energy using conventional turbines. A horizontal-axis screw turbine was designed and numerically tested to extract power from such low-head water sources. The 3-bladed screw-type turbine is placed horizontally perpendicular to the incoming flow, partially submerged in a narrow water channel at no-head condition. The turbine hydraulic performances were studied using Computational Fluid Dynamics models. Turbine design parameters such as the shroud diameter, the hub-to-shroud ratios, and the submerged depths were obtained through a steady-state parametric study. The resulting turbine configuration was then tested by solving the unsteady multiphase free-surface equations mimicking an actual open channel flow scenario. The turbine performance in the shallow channel were studied for various Tip Speed Ratios (TSR). The highest power coefficient was obtained at a TSR of 0.3. The turbine was then scaled-up to test its performance on a real site condition at a head of 0.3 m. The highest power coefficient obtained was 0.18. Several losses were observed in the 3-bladed turbine design and to minimize losses, the number of blades were increased to five. The power coefficient improved by 236% for a 5-bladed screw turbine. The fluid losses were minimized by increasing the blade surface area submerged in water. The turbine performance was increased by 74.4% after dipping the turbine to a bottom wall clearance of 30 cm from 60 cm. The final output of the novel horizontal-axis screw turbine showed a 2.83 kW power output at a power coefficient of 0.63. The turbine is expected to produce 18,744 kWh/year of electricity. The design feasibility test of the turbine showed promising results to harvest energy from small hydropower sources.

• 한국전자파학회논문지
• /
• 제20권10호
• /
• pp.1050-1060
• /
• 2009

본 논문에서는 능동 위상 배열 안테나를 가지는 SAR(Synthetic Aperture Radar)용 X-대역 T/R(Transmit/Receive) 모듈을 설계, 제작하였다. T/R 모듈은 X-대역에서 800 MHz 이상 대역폭을 가지며 이중 편파 운용이 가능하다. 송신 출력 7 W 이상에 잡음지수 3.9 dB 이하를 가진다. 위상과 이득은 6비트 위상변위기와 6비트 디지털 감쇠기에 의해 각각 제어된다. 게다가 제작된 T/R 모듈은 방향성 결합기와 전력분배기로 연결되는 성능 점검/보정 포트를 가진다. LTCC 다층 기판을 사용하여 고직접화 T/R 모듈이 가능하게 하였다. 모든 동작 주파수 대역에서 수신시 RMS 이득 오차는 최대 0.8 dB 이하이고, 송/수신시 RMS 위상 오차는 최대 $4^{\circ}$ 이하로 측정되었고, 또한 시험 결과 T/R 모듈은 요구되는 전기적인 성능을 만족하였다. 이 구조는 능동 위상 배열 SAR용 안테나에 적용될 수 있음을 확인하였다.

• Journal of Biosystems Engineering
• /
• 제43권4호
• /
• pp.426-439
• /
• 2018

Purpose: To continuously monitor soil and climatic properties, a data acquisition system (DAQ) was developed and tested in plum farms (Gyewol-ri and Haechang-ri, Suncheon, Korea). Methods: The DAQ consisted of a Raspberry-Pi processor, a modem, and an ADC board with multiple sensors (soil moisture content (SEN0193), soil temperature (DS18B20), climatic temperature and humidity (DHT22), and rainfall gauge (TR-525M)). In the laboratory, various tests were conducted to calibrate SEN0193 at different soil moistures, soil temperatures, depths, and bulk densities. For performance comparison of the SEN0193 sensor, two commercial moisture sensors (SMS-BTA and WT-1000B) were tested in the field. The collected field data in Raspberry-Pi were transmitted and stored on a web server database through a commercial communications wireless network. Results: In laboratory tests, it was found that the SEN0193 sensor voltage reading increased significantly with an increase in soil bulk density. A linear calibration equation was developed between voltage and soil moisture content depending on the farm soil bulk density. In field tests, the SEN0193 sensor showed linearity (R = 0.76 and 0.73) between output voltage and moisture content; however, the other two sensors showed no linearity, indicating that site-specific calibration is important for accurate sensing. In the long-term monitoring results, it was observed that the measured climate temperature was almost the same as website information. Soil temperature information was higher than the values measured by DS18B20 during spring and summer. However, the local rainfall measured using TR 525M was significantly different from the values on the website. Conclusion: Based on the test results obtained using the developed monitoring system, it is thought that the measurement of various parameters using one device would be helpful in monitoring plum growth. Field data from the local farm monitoring system can be coupled with website information from the weather station and used more efficiently.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1079-1081
• /
• 2007

An L-band Linear Accelerator System for E-beam sterilization is under construction for bio-technology application. The klystron-modulator system as an RF microwave source has an important role as major components to offer the system reliability for long time steady-state operations. A PFN line type pulse generator with a peak power of 71.5-MW, $7\;{\mu}s$, 285 pps is required to drive a high-power klystron. The high power pulse transformer has a function of transferring pulse energy from a pulsed power source to a high power load. The pulse transformer producing a pulse with a peak voltage of 275 kV is required to produce 30-MW peak and 60 kW average RF output power at the frequency of 1.3-GHz. We have designed the high power pulse transformer with 1:13 step-up ratio. The peak and average power capability is 71.5-MW (275 kV, 260 A at load side with $7\;{\mu}s$ pulse width) and 130 kW, respectively. In this paper, we present measurements and its analysis on the design parameters, and an initial test result as well as a design concept on the high-power pulse transformer.

• Journal of Chest Surgery
• /
• 제40권9호
• /
• pp.593-599
• /
• 2007

배경: 폐절제술이 우심실 기능에 미치는 영향과 BNP (brain natriuretic peptide)의 관계에 대해서는 아직 자세히 알려져 있지 않다. 본 연구에서는 폐절제술 후 변화하는 혈역학적 수치와 우심부전의 보상기전으로서 증가하는 BNP의 관계에 대해서 알아보고 BNP가 폐절제술 후의 우심부전의 지표가 될 수 있는지를 확인하고자 하였다. 대상 및 방법: 폐암으로 폐엽절제술과 전폐절제술을 시행한 12명의 환자에서 면역화학적 방법(Elecsys $1010^{(R)}$, Roche, Germany)을 이용하여 수술 전후의 NT-proBNP 수준을 측정하고, Swan-Ganz 카테터로 수술 전후에 혈역학적 지표를 측정하여 비교하였으며 수술 전후에 심초음파를 시행하여 우심실 및 좌심실압 등의 변화를 비교하였다. 통계처리는 SPSSWIN(version 11.5)를 이용한 Wilcoxon rank sum test와 linear regression을 이용하였다. 결과: NT-proBNP 수준은 수술 전과 비교하여 수술 후 6시간, 수술 후 1일과 2일, 3일, 7일째에 유의하게 증가하였다(p=0.003, 0.002, 0.002, 0.006, 0.004). Swan-Ganz 카테터를 통한 혈역학적 변수 중에서는 평균 폐동맥압이 수술 전과 비교하여 수술 직후와 수술 후 6시간, 수술 후 1일, 2일, 3일째에 유의하게 증가하였으며(p=0.002, 0.002, 0.006, 0.007, 0.008), 평균 우심실압력은 수술 직후와 수술 후 6시간, 수술 후 1일과 3일에서 유의하게 증가하였다(p=0.006, 0.009, 0.044, 0.032). 폐혈관저항지수[폐혈관저항지수=(평균폐동맥압-평균폐동맥쐐기압)/심박출계수]는 수술 후 6시간, 수술 후 2일에서 유의한 증가가 있었다(p=0.008, 0.028). 평균폐동맥압의 수술 후 변화와 NT-proBNP 변화를 회기분석하였을 때 수술 후 6시간에서 유의성이 있었으며(r=0.602, p=0.038) 이후에는 유의성이 없었다. 심초음파 결과는 수술 전후를 비교하여 유의성이 없었다. 결론: 폐절제술 후 6시간의 폐동맥압의 변화와 NT-proBNP의 변화가 유의성이 있었다. 따라서 폐절제술 후 NT-proBNP의 변화는 폐절제술 후 우심실의 조기 혈역학적 변화를 반영하는 척도가 될 수 있으리라 판단된다.