• Journal of Korean Society of Forest Science
• /
• v.77 no.4
• /
• pp.382-388
• /
• 1988

Improvement of productivity by forest tree breeding work in Korea was estimated for a few important tree species. Progenies of 17 plus trees of red pine (Pines densiflora) outgrew by 57 percentage compared with progenies of unselected trees at age 15. If best three families are selected among the 17, more than double in volume grow-th is expected. The hybrid Pinus rigida ${\times}$ P. taeda showed more than double volume growth compare to P. rigida at a southern plantation at age 15. However, the superiority of the hybrid decreased at northern plantations, mainly because of low coldhardiness of the hybrid. At a northern plantation, the hybrid grew less than the P. rigida on upper hill, while the hybrid grew much better than the P. rigida on flat area. Another hybrid Populus alba ${\times}$ P. glandulosa grew faster than both parents by two to two and half times according to planting sites at age 10. Introduction of Pinus rigida also showed increased volume growth. Volume increase by selection of best five provenances among 45 at age 12 was estimated as 53 percent compare to progenies of plus trees in Korea, Additional 19 percent of volume increase was expected by selection of the best families within the best provenances. Annual production of chestnuts reached about 70,000 M/T by planting resistant clones to chestnut gall wasp (Dryocosmus kuriphilus), which killed almost all susceptible trees. Although polyploid trees and mutants have been produced by colchicine treatments in over 10 tree species, none of them is economically important Remarkable improvement of productivity is expected by biotechnology in future through selection, hybridization, introduction of foreign genes at cell, cell organelle and gene level, and gene transformation. At present, mass propagation of superior planting materials by tissue culture will increase the productivity.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.10
• /
• pp.1353-1361
• /
• 2009

This study investigated the effect of waxy barley on the incorporation trans fat (tFA) into plasma lipid and lipid profile through 6 weeks trial. 39 healthy volunteers were divided into 2 groups and fed waxy barley bread (WBG) or wheat bread (WG) containing equivalent amounts of tFA (elaidic acid rich, 3.75 g/day), respectively. Plasma lipid profiles and fatty acid composition at 0, 2, 4, 6 weeks after a respective bread were studied. Plasma lipid was extracted by the method of Folch, esterified by acid transmethylation and analyzed by gas chromatography. The fatty acid composition reflected the fatty acid proportion of the test fat. However, consumption of waxy barley bread with tFA for 6 weeks affected plasma fatty acid composition including tFA. Incorporation of tFA into plasma lipid was significantly lowered compared to WBG than in WG after 6 weeks of consumption. Furthermore, saturated fatty acids such as C16:0 and C18:0 levels were also significantly lowered in WBG than in WG. Furthermore, plasma total cholesterol level and TG/HDL-cholesterol ratio were also significantly lowered in WBG compared to WG at 2, 4 and 6 weeks. These results suggest that waxy barley bread with high $\beta$-glucan lowered plasma trans, saturated fatty acid and total cholesterol levels though the inhibition of lipid absorption.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.12
• /
• pp.1823-1829
• /
• 2016

This study investigated the optimal percentage of brownies substituted with rice bran dietary fiber (3%, 6%, 9%, and 12%). The sample and control were compared for quality characteristics, specific gravity, viscosity, pH, moisture content, water activity, specific volume, color, textural characteristic, consumer acceptance, and CATA (check-all-that-apply). The specific gravity of the control sample was not significantly different among the samples. The viscosity was highest at the brownie containing 12% of rice bran dietary fiber. Moisture content and water activity were highest in the 6% sample. pH of control sample batter was highest, but reduced with increasing amounts of rice bran dietary fiber. For colors, lightness of the 6% sample batter was highest at 25.31, and redness and yellowness significantly increased with increasing amounts of rice bran dietary fiber. For textural characteristics, hardness, and chewiness significantly increased with increasing amounts of rice bran dietary fiber. Cohesiveness and resilience were not significantly different between samples. In the sensory evaluation, overall acceptability was highest in the control group and lowest for the 12% sample. In the frequency analysis of the CATA, as rice bran dietary fiber was added, the amount of bran flavor, oliy, and unpleasant increased while frequency of bitterness, sweetness, and chocolate taste decreased. In the principal component analysis, characteristics of unpleasant, oily, soybean flavor, and sweetness were strongly detected in the 12% sample. The control sample showed strong sweetness and bitterness. The results indicate that 3% to 6% rice bran dietary fiber is appropriate for production of brownies.

• Progress in Medical Physics
• /
• v.27 no.1
• /
• pp.31-36
• /
• 2016

The paper discusses radiation dose of dual energy CT on which copper modulation layer, is mounted in order to improve diagnostic performance of the dual energy CT. The radiation dose is estimated using MCNPX and its results are compared with that of the conventional dual energy CT system. CT X-ray spectra of 80 and 120 kVp, which are usually used for thorax, abdominal, head, and neck CT scans, were generated by the SPEC78 code and were used for the source specification 'SDEF' card for MCNPX dose modeling. The copper modulation layer was located 20 cm away from a source covering half of the X-ray window. The radiation dose was measured as changing its thickness from 0.5 to 2.0 mm at intervals of 0.5 mm. Since the MCNPX tally provides only normalized values to a single particle, the dose conversion coefficients of F6 tally for the modulation layer-based dual energy CBCT should be calculated for matching the modeling results into the actual dose. The dose conversion coefficient is $7.2*10^4cGy/output$ that is obtained from dose calibration curve between F6 tally and experimental results in which GAFCHORMIC EBT3 films were exposed by an already known source. Consequently, the dose of the modulation layer-based dual energy cone beam CT is 33~40% less than that of the single energy CT system. On the basis of the results, it is considered that scattered dose produced by the copper modulation layer is very small. It shows that the modulation layer-based dual energy CBCT system can effectively reduce radiation dose, which is the major disadvantage of established dual energy CT.

• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.3
• /
• pp.201-208
• /
• 2007

Purpose: We investigated whether the diagnostic performance of SPECT scintimammography (SMM) can be improved by adding computer-aided diagnosis (CAD) of ultrasonography (US). Materials and methods: We reviewed breast SPECT SMM images and corresponding US images from 40 patients with breast masses (21 malignant and 19 benign tumors). The quantitative data of SPECT SMM were obtained as the uptake ratio of lesion to contralateral normal breast. The morphologic features of the breast lesions on US were extracted and quantitated using the automated CAD software program. The diagnostic performance of SPECT SMM and CAD of US alone was determined using receiver operating characteristic (ROC) curve analysis. The best discriminating parameter (D-value) combining SPECT SMM and the CAD of US was created. The sensitivity, specificity and accuracy of combined two diagnostic modalities were compared to those of a single one. Results: Both SPECT SMM and CAD of US showed a relatively good diagnostic performance (area under curve = 0.846 and 0.831, respectively). Combining the results of SPECT SMM and CAD of US resulted in improved diagnostic performance (area under curve =0.860), but there was no statistical differerence in sensitivity, specificity and accuracy between the combined method and a single modality. Conclusion: It seems that combining the results of SPECT SMM and CAD of breast US do not significantly improve the diagnostic performance for diagnosis of breast cancer, compared with that of SPECT SMM alone. However, SPECT SMM and CAD of US may complement each other in differential diagnosis of breast cancer.

• Nuclear Medicine and Molecular Imaging
• /
• v.42 no.6
• /
• pp.464-468
• /
• 2008

Purpose: Effective half life of I-131 ($T_{eff}$) in patients with differentiated thyroid cancer treated by I-131 is must-know value for dose calculation and determination of release time from isolation room. There has been no report about $T_{eff}$ in Koreans. Thus, author tried to measure dose rate without radiation exposure to faculty members and calculated $T_{eff}$. Methods: Probe of radiation survey meter was fixed at the wall of isolation room, and body of survey meter was placed outside the room. With this simple arrangement, author could measure radiation frequently without radiation exposure to faculty members in 68 patient (F=55, M=13, age=$47{\pm}13.7$) treated by I-131 ($3.7{\sim}7.4\;GBq$) for differentiated thyroid cancer from Jan 2006 to Dec 2006. From this data, $T_{eff}$, 48 hr retention rate, and the time necessary to whole body retention of I-131 become less than 1.1 GBq were calculated. Serum creatinine levels were measured before and after thyroid hormone withdrawal. Results: $T_{eff}$ was $15.4{\pm}4.3\;hr$ ($9.4{\sim}32.5\;hr$). There was a loose correlation between $T_{eff}$ and serum creatinine concentration (r=0.45). 48hr retention was $4.9{\pm}4.2%$ ($1{\sim}23%$). Time necessary to whole body retention of I-131 become less than 1.1 GBq was calculated as $47.1{\pm}13.2\;hr$ for 9.25 GBq, $42.1{\pm}11.9\;hr$ for 7.4 GBq, $35.7{\pm}10.0\;hr$ for 5.55 GBq, and $26.7{\pm}7.5\;hr$ for 3.7 GBq dose of I-131. Conclusion: Author successfully measured radiation dose rates in isolated patients treated by high dose of I-131 without radiation exposure to the faculty members with simple arrangement of survey meter probe. Using those data, $T_{eff}$ and some other indices were calculated.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.4
• /
• pp.297-302
• /
• 2001

To compare the relationship between the vertical distribution of heavy metals in paddy soil and soil pH near four abandoned metal mines, 40 paddy surface soils $(0{\sim}15\;cm)$ and 12 soils with soil depths ($0{\sim}20$, $20{\sim}40$, $40{\sim}60$, $60{\sim}80$ and $80{\sim}100$ cm) were collected. Both total and extractable heavy metal contents in soils were analyzed after acid digestion $(HNO_3:HClO_4:H_2SO_4)$ and 0.1 N-HCl extraction, respectively. The 0.1 N-HCl fraction ratio over total contents of Cd, Cu, Pb, and Zn were 57, 30, 23, and 19% respectively. Vertical distribution of heavy metals varied considerably among the different mines. In Choil mine, there was no difference in concentrations of all the metals with soil layers. However, Cu and Pb contents in Gahak mime were high at $0{\sim}20\;cm$ depth, and Zn was high at $0{\sim}40\;cm$ depth. In Sinyemi mine, Cd and Cu contents were high at $0{\sim}40\;cm$ depth. Cd, Cu, and Pb contents in Okcheon mine were high through all soil profiles up to 100 cm soil depth. The 0.1 N-HCl fraction ratio over total contents of heavy metals with soil layers were very high at $0{\sim}20\;cm$ depth. As soil depth increased, fraction ratio of heavy metals decreased at the high soil pH (Gahak, Sinyemi, and Choil mines). However, the ratios of Cd, Cu, and Pb in Okcheon mine, having a relatively lower soil pH than other sites, were relatively similar through all the soil profiles up to 100 cm soil depth. Therefore, it was estimated that the mobility and availability of heavy metals in soils were affected by soil pH.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.3
• /
• pp.179-184
• /
• 2013

BACKGROUND: Accurate estimates of total direct $CH_4$ emissions from croplands on a country scale are important for global budgets of anthropogenic sources of $CH_4$ emissions and for the development of effective mitigation strategies. Methane production resulted by the anaerobic decomposition of organic compounds where $CO_2$ acts as inorganic electron acceptor. This process could be affected by the addition of rice straw, water management and rice variety itself. METHODS AND RESULTS: Rice (Oryza sativa L. Japonica type, var Samkwangbyeo) was cultivated in four plots: (1) Nitrogen-Phosphorus-Potassium (NPK) ($N-P_2O_5-K_2O$:90-45-57 kg/ha); (2) NPK plus 3 Mg/ha rice straw (RS3); (3) NPK plus 5 Mg/ha rice straw (RS5); (4) NPK plus 7 Mg/ha rice straw (RS7) for 3 years (2010-2012) and the rice straw incorporated in fall (Nov.) in Gyeonggi-do Hwaseong-si. Gas samples were collected using the closed static chamber which were installed in each treated plot of $152.9m^2$. According to application of 3, 5, 7 Mg/ha of rice straw, methane emission increased by 46, 101, 190%, respectively, compared to that of the NPK plot. CONCLUSION(S): We obtained a quantitative relationship between $CH_4$ emission and the amount of rice straw applied from rice fields which could be described by polynomial regression of order 2. The emission scaling factor estimated by the relationship were in the range of IPCC GPG (2000).

• Applied Microscopy
• /
• v.30 no.2
• /
• pp.173-183
• /
• 2000

This study was designed to observe the ultrastructural localization of synoviocytes, which are concerned with the function of phagocytic synovial cells (type A synoviocytes, macrophage-like synoviocytes), in the knee joint of the human for CD14 and CD105 by cryo-immune-electron microscopic technique. The synovium were dissected and fixed for two hours (in 4% paraformaldehyde and 0.1% glutaraldehyde mixture), and were immerged in 2.3 M sucrose and 20% PVP solution. Finally, they were cut with the cryoultramicrotome and labelled with primary antibodies (monoclonal mouse anti-human CD14, monoclonal mouse anti-human CD105 (endoglin) and secondary (donkey anti-mouse IgG) tagged with 6 nm colloidal gold particles. The tissues were observed under transmission electron microscope. This study was resulted as follows. 1. In the synovium of the human knee joint, CD14+ cells were identified. These cells showed phagocytic synovial cell's features. In the phagocytic synoviocyte, the distributions of CD14 were marked in the cytoplasm, around vacuoles, and in cytoplasmic process, but not detected inside of vacuoles. 2. In the synovium of the human knee joint, CD105+ cells were identified. These cells were recognized endothelial cells and phagocytic synovial cells. In the phagocytic synovial cells, the distributions of CD105 (endoglin) were marked in cytoplasic process, around vacuoles, and in cell membrane, but not detected inside of vacuoles. On the basis of above findings, it is obvious that phagocytic synovial cells were marked at CD 14 and CD 105, and might be play the role of activated macrophages or phagocytes in the synovial membrane.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.2
• /
• pp.172-180
• /
• 2009

This study was carried out to compare the physicochemical characteristics and sensory quality of Sogokju (Korean traditional rice wine) prepared with waxy rice varieties. Among tested waxy rice varieties, highest protein contents (8.11%) was observed in cv. Sangjuchal, and highest whiteness and L-value were observed in cv. Hwaseonchal, while no significant differences in gelatinization temperature could be observed among tested varieties, and cv. Boseokchal and Sinseonchal exhibited higher breakdown viscosity compared to the others. The alcohol contents of Sogokju with waxy rice varieties ranges from 13.0 to 13.4%, and the brix degree and turbidity were within the range of 20.5 to 24.6 $^{\circ}Bx$, and 0.0344 to 0.0530, respectively. The highest L-value (6.90), b-value (l.45), pH (4.79), total acidity (0.8384%), and glucose content (10.843 g/100 ml) could be observed in Sogokju made with cv. Sangjuchal. The organic acids such as succinic acid, malic acid, citric acid and oxalic acid could be detected in Sogokju. Although no variety-dependant differences in appearance, aroma, and taste could be found in sensory evaluation, Sogokju made with cvs. Sinseonchal, Haepyeongchal, and Hwaseonchal showed higher overall quality than Sogokju made with cv. Dongjinchal, which is most widely used for Sogokju used for Sogokju production nowadays.