• The Korean Journal of Physiology and Pharmacology
• /
• v.13 no.4
• /
• pp.327-335
• /
• 2009

The aim of this study was to determine whether losartan, an angiotensin II (Ang II) type 1 ($AT_1$) receptor could influence the CA release from the isolated perfused model of the rat adrenal medulla. Losartan (5${\sim}$50 ${\mu}$M) perfused into an adrenal vein for 90 min produced dose- and time-dependent inhibition of the CA secretory responses evoked by ACh (5.32 mM), high $K^+$ (56 mM, a direct membrane depolarizer), DMPP (100 ${\mu}$M) and McN-A-343 (100 ${\mu}$M). Losartan failed to affect basal CA output. Furthermore, in adrenal glands loaded with losartan (15 ${\mu}$M) for 90 min, the CA secretory responses evoked by Bay-K-8644 (10 ${\mu}$M, an activator of L-type $Ca^{2+}$ channels), cyclopiazonic acid (10 ${\mu}$M, an inhibitor of cytoplasmic $Ca^{2+}$ -ATPase), veratridine (100 ${\mu}$M, an activator of $Na^+$ channels), and Ang II (100 nM) were markedly inhibited. However, at high concentrations (150${\sim}$300 ${\mu}$M), losartan rather enhanced the CA secretion evoked by ACh. Collectively, these experimental results suggest that losartan at low concentrations inhibits the CA secretion evoked by cholinergic stimulation (both nicotininc and muscarinic receptors) as well as by membrane depolarization from the rat adrenal medulla, but at high concentration it rather inhibits ACh-evoked CA secretion. It seems that losartan has a dual action, acting as both agonist and antagonist to nicotinic receptors of the rat adrenal medulla, which might be dependent on the concentration. It is also thought that this inhibitory effect of losartan may be mediated by blocking the influx of both $Na^+$ and $Ca^{2+}$ into the rat adrenomedullary chromaffin cells as well as by inhibiting the $Ca^{2+}$ release from the cytoplasmic calcium store, which is thought to be relevant to the $AT_1$ receptor blockade, in addition to its enhancement of the CA release.

• Journal of the Korean Magnetics Society
• /
• v.7 no.4
• /
• pp.173-179
• /
• 1997

Change in phases, microstructures, and magnetic properties by the variation of quench rate and heat treatment were investigated for melt-spun $Fe_{77}Pr_{15}C_8$ ribbons. The amorphization of as-spun ribbons increased as the quench rate increased. As a result, the ribbon quenched at 40 m/s was almost entirely amorphous. Similarly to cast alloys, the primary phase in crystalline ribbons quenched at 10 m/s was $\alpha$-Fe followed by the secondary $Fe_{17}Pr_2C_x$. Crystalline phases were still dominant in the ribbon spun at 20 m/s, but in this case crystallization of $Fe_{17}Pr_2C_x$ was remarkable with a little suppression of $\alpha$-Fe. At 30 m/s an amorphous phase obviously dominated in the as-spun ribbons with small fraction of crystals. Therefore, substantial amount of hard magnetic $Fe_{14}Pr_2C$ was not obtained from the as-spun state but, as in cast alloys, produced only by a solid-state transformation. Within a few minutes fine grains of $Fe_{14}Pr_2C$ were easily obtained at relatively low temperature when the degree of amorphization of as-spun ribbons was higher. The grain size of $Fe_{14}Pr_2C$ was well less than 1${\mu}{\textrm}{m}$. The ribbons quenched at 20 or 30 m/s yielded higher coercivities after heat treatment.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.2
• /
• pp.120-127
• /
• 2020

The aim of this study was to evaluate the antimicrobial effect of photodynamic therapy (PDT) using plaque disclosing agent, 10 - 20 mM erythrosine, as a photosensitizer. Multispecies cariogenic biofilms containing Streptococcus mutans, Lactobacillus casei and Candida albicans were formed on hydroxyapatite disc. 20 μM, 10 mM and 20 mM erythrosine were applied as a photosensitizer for 3 minutes, and then light-emitting diode (LED) irradiated for 24 seconds. Colony-forming unit (CFU) were measured and biofilms were observed using confocal laser scanning microscopy (CLSM). CFU were significantly decreased in the PDT groups using 10 - 20 mM erythrosine (10 mM, 20mM) and the results were also confirmed by CLSM. This study confirms the high antimicrobial effect of photodynamic therapy using plaque disclosing agent as a photosensitizer.

• Journal of the Korean Institute of Navigation
• /
• v.20 no.4
• /
• pp.81-98
• /
• 1996

The purpose of this study was analysis of the muscle action in physical exercise in the rolling machine. The rolling machine moved by eletric power-driven was made to keep the constant cycle and size of rolling. The subjects of this study consist of 4 seaman(SM) and 4 landman (LM). The experiment analyzed the muscle power of lower and upper limbs by Intergrated Electromyogram(IEMG). The measurement was made on the ground, and 6 and 8 degrees of rolling separately. This study concludes as follows ; including analysis of IEMG of heavy exercise in two hands curl, a standstill walking and just standing. 1. IEMG of the lower limbs when standing. 1) In 6 degrees of rolling, for the landman(LM), vastus medialis m.(9.73), vastus lateralis m.(9.55), and rectus femores m.(8.73) acted more. As for the seaman(SM), tibialis anterior m.(5.38), biceps femores m.(5.05), and gastrocnemius m.(4.47) acted more. 2) In 8 degrees of rolling, in common, for both LM and SM, it were vastus medialis m.(11.20 and 8.97), vastus lateralis m.(16.20 and 4.63), and tibialis anterior m.(5.13 and 4.47). 3) It was showed that IEMG of LM was larger than that of SM. 2. IEMG of the lower limbs when walking. 1) On the ground, for the LM, gastrocnemius m.(7.08), vastus medialis m.(6.65), and vastus latralis m.(6.60) acted more. As for the SM, vastus lateralis m.(7.08), vastus medialis m.(6.58) and restus femores m.(5.10) acted more. 2) In both 8 and 6 degrees of rolling, vastus medials m.(14.50 and 11.98), vastus lateralis m.(10.10 and 14.10), and gastrocnemius m.(11.75 and 7.10) acted more in two groups. 3) It was showed that IEMG of LM was larger than that of SM. 3. IEMG of the lower limbs when heavy exercise(two hands curl). 1) On the ground, for the LM, vastus lateralis m.(21.68), vastus medialis m.(16.08), and rectus femores m.(14.08) acted more. As for the SM, tibialis anterior m.(16.08), vastus medialis m.(14.58), and vastus lateralis m.(8.78) acted more. 2) In 8 and 6 dgrees of rolling, it were vastus medialis m.(17.05 and 12.45), vastus lateralis m.(37.98 and 17.08), and tibialis anterior m.(19.83 and 13.20). 3) It was showed that IEMG of LM was larger than that of SM. 4. IEMG of the upper limbs when heavy exercise. 1) On the ground, the brachialis m.(44.30 and 17.80), and biceps brachii m.(13.40 and 25.10) acted more in two groups. 2) In both 6 and 8 degrees of rolling, the brachialis m.(37.60 and 24.35), and biceps brachii m.(11.38 and 7.97) acted more in two groups. 3) It was showed that IEMG of SM was larger than that of LM.

• Electrical & Electronic Materials
• /
• v.9 no.4
• /
• pp.372-378
• /
• 1996

The phtoreflectance(PR) spectra of B ion implanted semi-insulating(SI) GaAs were studied. Ion implantation was performed by 150keV implantation energy and 1*10/aup 12/-10$^{15}$ ions/c $m^{2}$ doses. Electronic band structure was damaged by ion implantation with above 1*10$^{13}$ ions/c $m^{2}$ dose. When samples were annealed, " peak was observed at 30-40meV below band gap( $E_{g}$). It should be noted that this energy is close to the ionization energies of S $i_{As}$ , and GeAs in G $a_{As}$ which are also found as impurities in LEC GaAs, it is therefore possible that this feature is related to S $i_{As}$ , or G $e_{As}$ and B ions by implanted defect associated with them. From PR spectra of etched samples which is as-implanted by 1*10$^{14}$ and 1*10$^{15}$ ions/c $m^{2}$ dose, the depth of destroyed electronic band structure was from surface to 0.2.mu.m below surface.nic band structure was from surface to 0.2.mu.m below surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.477-478
• /
• 2006

Characteristics of InAs/GaAs quantum dot (QD) ridge laser diodes (LDs) are investigated for high-power $1.3\;{\mu}m$ applications. For QD ridge LDs with a $5-{\mu}m$-wide stripe and a 1-mm-long cavity, the emission wavelength of 1284.1 nm, the single-uncoated-facet CW output power as high as 90 mW, the external efficiency of 0.31 W/A and the threshold current density of $800\;mA/cm^2$ are obtained. The linewidth enhancement factor ($\alpha$-factor) is successfully measured to be between 0.4 and 0.6, which are about four times as small values with respect to conventional quantum well structure. It is possible that this result significantly reduce the filamentation of far-field profiles resulting in better beam quality for high power operation.

• Journal of Korean Society of Forest Science
• /
• v.81 no.2
• /
• pp.139-145
• /
• 1992

A planning method of optimum forest road was tested in the compartment II of Kangweon National University Forests by using a digital terrain model under four evaluation factors, i. e., minimum road length, average skidding distance, exploitative index, and ratio of inaccessible points. The results of the study were as follows : 1. Optimum forest road design based on the minimum road length was shown as 6035.6m, 12.73m/ha, 279.9m, 1.43, and 15.7% for total road length, forest road density, average skidding distance, exploitative index, and ratio of inaccessible points, respectively. 2. Optimum forest road design based on the average skidding distance was shown as 7828.5m, 16.52m/ha, 198.4m, 1.31, and 4.0% for total road length, forest road density, average skidding distance, exploitative index, and ratio of inaccessible points, respectively. 3. Optimum forest road design based on the exploitative index was shown as 7410.6m, 15.64m/ha, 210.9m, 1.26, and 5.0% for total road length, forest road density, average skidding distance, exploitative index, and ratio of inaccessible points, respectively. 4. Optimum forest road design based on the ratio of inaccessible points was shown as 8307.1m, 17.53 m/ha, 184.9m, 1.29, and 2.5% for total road length, forest road density, average skidding distance, exploitative index, and ratio of inaccessible points, respectively.

• The Korean Journal of Ecology
• /
• v.15 no.4
• /
• pp.329-335
• /
• 1992

Bionomics of diplopodes was studid near chongyongchi in the chiri mountains from sept. 1990 to dec. 1991 by surveying 10 sample sites at 12 occasions. During this period 13 species of diplopodes from 11 genera, 8 families, and 6 orders were collected. Species were more diversed under quercus mongolica followed by quercus serrata and pinus densiflora sp. epenerchodus koreanus bifidus, and e. k. koreanus were found in all sample sites and these 6 species have been reported to be distributed throughout south korea. yamasinaium sp., riukiaria semicirculalis, parafontaria koreanus, and sicotanus eurygaster were found only under quercus mongolica community and postulated to be related to diet meanwhile other enviromental factors such as temperature, soil ph, and altitude should be taken into consideration. Species diversity index was higher at altitude 700m followed by at 900m, 1, 000m, 800m, 600m, 500m, 1, 100m, 400m, 300m, and 1, 200m in discending order likely due to the enviromental factors such as climatic and edaphic affects, disturbance by human, and degree of floral diversity. Species similarity index was highest 0.78 between altitude 500m and 600m sample sites could be grouped into 3, namely first 300m, 400m, second 500m, 600m, 700m, 1, 000m, 800m, 900m, and third 1, 100m, 1, 200m.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.221-221
• /
• 2010

본 실험에서는 축전결합형 고주파 플라즈마와 $BCl_3$와 He의 혼합가스를 이용하여 화합물 반도체인 GaAs와 AlGaAs의 건식식각에 대해 연구하였다. 공정변수로는 첫째, BCl3와 He의 혼합가스 비율을 0%에서 100%까지 변화시켰다. 둘째, 고주파 파워를 50 W에서 200W 까지 변화를 주었고, 셋째, 공정압력을 120 mTorr~300 mTorr 까지 변화시켰다. 식각 실험을 마친 시료는 표면 단차 측정기와, 주사전자현미경을 이용하여 식각률과 선택비, 표면거칠기, 표면형상에 대하여 분석을 진행하였다. 또한, 광학발광분석계 (OES)를 이용하여 건식식각 실험 중 혼합가스에 의해 발생하는 플라즈마의 발광특성에 대한 실시간 분석을 하였다. 결과에 따르면, 1) 혼합가스에서 He의 비율이 20%일 때 GaAs와 AlGaAs 시료의 식각율이 $0.7\;{\mu}m/min$ 와 $0.6\;{\mu}m/min$ 로 가장 높게 나타났다. 2) 감광제에 대한 시료의 선택비 또한 동일 조건에서 GaAs의 경우 1 : 12, AlGaAs의 경우 1:8로 가장 높게 나타났다. 3)고주파 파워의 변화에 따른 식각률의 경우 100 W에서 GaAs 의 경우 $0.6\;{\mu}m/min$, AlGaAs의 경우 $0.5\;{\mu}m/min$ 이었고, 고주파 파워가 증가할수록 식각률은 감소하였다. 4) 감광제에 대한 시료의 식각 선택비의 경우 50 W에서 GaAs 시료가 1:14, AlGaAs 시료가 1:10으로 가장 높은 선택비를 보였고 고주파 전원이 증가할수록 선형적으로 감소하였다. 5) 표면거칠기는 50~100 W 구간에서는 1.0~1.5 nm 으로 큰 증가폭이 없다가 150 W 이상에서는 3.0~5.0 nm 으로 증가하였다. 반응기의 압력이 120 mTorr에서 300 mTorr로 변화할 때 식각률과 선택비는 비교적 선형적으로 감소하였으며, 표면거칠기 또한 증가하였다. 결론적으로 $BCl_3/He$ 고주파 플라즈마에서 약 20%의 He을 포함하고 있을 때 가장 우수한 건식 식각 결과를 얻었다.

• Journal of the Korean Vacuum Society
• /
• v.15 no.6
• /
• pp.637-641
• /
• 2006

We present the DC and RF characteristics of 100 nm gate length InGaAs/InAlAs/GaAs metamorphic high electron mobility transistors (MHEMTs). We fabricated the T-gate with 100 nm foot print by using a positive resist ZEP520/P (MMA-MAA)/PMMA trilayer by double exposure method. The fabricated 100 nm MHEMT with a $70\;{\mu}m$ unit gate width and two fingers were characterized through do and rf measurements. The maximum drain current density of 465 mA/mm and extrinsic transconductance $(g_m)$ of 844 mS/mm were obtained with our devices. From rf measurements, we obtained the current gain cut-off frequency $(f_T)$ of 192 GHz, and maximum oscillation frequency $(f_{max})$ 310 GHz.