• Journal of Korean society of Dental Hygiene
• /
• v.11 no.5
• /
• pp.801-809
• /
• 2011

Objectives : The Purpose of this study is to apply an oral health education program to the high school students, to analyze their oral health knowledge and changes of behaviors, and to examine oral health education for effective, thus using all of those results as the basic data for developing materials on their oral health education. Methods : The study was conducted on the freshmen and women of M high student in Seoul City. They were in total 85 student, consisting of 77 of male student(90.6%) and 8 of female student(9.4%). Knowledge survey contained 38 questions including such as dental common knowledge, dental caries, and periodontal disease, while behaviors survey did 24 questions including such as tooth-brushing, brush selection and management, and prevention of oral disease. Results : First, oral health education had brought to improve oral health knowledge for high school students. Second, even with the improvement of oral health behaviors through the education, there was not statistically significant on behaviors such as the regular checkups and the usage of dental floss. And third, the students in general were satisfied with the oral health education. Conclusions : First, the oral health education being conducted in kindergarten and elementary school should be continued or expanded into the adolescence. Second, the oral health education should be focused efficiently on the learning objective demanding for a change of behavior through the repeated education, for which the education that is right for the high school students should be done. And third, for the effective oral health education in high school, the media that could cause interests should be developed.

• Quality Improvement in Health Care
• /
• v.15 no.2
• /
• pp.25-30
• /
• 2009

• 월간산업보건
• /
• s.99
• /
• pp.34-36
• /
• 1996

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.9-16
• /
• 2010

Purpose: With increasing medical use of radiation and radioactive isotopes, there is a need to better manage the risk of radiation exposure. This study aims to grasp and analyze the individual radiation exposure situations of radiation-related workers in a medical facility by specific job, in order to instill awareness of radiation danger and to assist in safety and radiation exposure management for such workers. Materials and Methods: 1 January 2007 to 31 December 2009 to work in medical institutions are classified as radiation workers Nuclear personal radiation dosimeter regularly, continuously administered survey of 40 workers in three years of occupation to target, Imaging Unit beautifully, age, dose sector, job function-related tasks to identify the average annual dose for a deep dose, respectively, were analyzed. The frequency analysis and ANOVA analysis was performed. Results: Imaging Unit beautifully three years the annual dose PET and PET/CT in the work room 11.06~12.62 mSv dose showed the highest, gamma camera injection room 11.72 mSv with a higher average annual dose of occupation by the clinical technicians 8.92 mSv the highest, radiological 7.50 mSv, a nurse 2.61 mSv, the researchers 0.69 mSv, received 0.48 mSv, 0.35 mSv doctors orderly, and detail work employed the average annual dose of the PET and PET/CT work is 12.09 mSv showed the highest radiation dose, gamma camera injection work the 11.72 mSv, gamma camera imaging work 4.92 mSv, treatment and safety management and 2.98 mSv, a nurse working 2.96 mSv, management of 1.72 mSv, work image analysis 0.92 mSv, reading task 0.54 mSv, with receiving 0.51 mSv, 0.29 mSv research work, respectively. Dose sector average annual dose of the study subjects, 15 people (37.5%) than the 1 mSv dose distribution and 5 people (12.5%) and 1.01~5.0 mSv with the dose distribution was less than, 5.01~10.0 mSv in the 14 people (35.0%), 10.01~20.0 mSv in the 6 people (15.0%) of the distribution were analyzed. The average annual dose according to age in occupations that radiological workers 25~34 years old have the highest average of 8.69 mSv dose showed the average annual dose of tenure of 5~9 years in jobs radiation workers in the 9.5 mSv The average was the highest dose. Conclusion: These results suggest that medical radiation workers working in Nuclear Medicine radiation safety management of the majority of the current were carried out in the effectiveness, depending on job characteristics has been found that many differences. However, this requires efforts to minimize radiation exposure, and systematic training for them and for reasonable radiation exposure management system is needed.

• Biomolecules & Therapeutics
• /
• v.19 no.3
• /
• pp.308-314
• /
• 2011

It has been shown that circadian genes not only play an important role on circadian rhythms, but also participate in other physiological and pathological activities, such as drug dependence, cancer development and radiation injury. The Per2, an indispensable component of the circadian clock, not only modulates circadian oscillations, but also regulates organic function. In the present study, we applied mPER2-upregulated NIH3T3 cells to reveal the relationship of mPer2 and the cells damaged by ultraviolet C (UVC). NIH3T3 cells at the peak of the expression of mPer2 induced by phorbol 12-myristate 13-acetate (PMA) demonstrated little damage by UVC evaluated by MTT assay, cell growth curves and cell colony-forming assay, compared with that at the nadir of the expression of mPer2. Overexpression of mPER2, accompanied p53 upregulated, also demonstrated protective effect on NIH3T3 cells damaged by UVC. These results suggest that mPer2 plays a protective effect on cells damaged by UVC, whose mechanism may be involved in upregulated p53.

• Parasites, Hosts and Diseases
• /
• v.50 no.4
• /
• pp.371-374
• /
• 2012

Toxoplasma gondii is one of the major agents of infectious abortions and due to its worldwide distribution can threat healthy pregnant women who had no previous exposure to this parasite. The present study was designed to investigate the contribution of T. gondii to spontaneous abortions in Zanjan, Northwest of Iran, using ELISA method. Blood Samples were collected from 264 mothers referred to the provincial hospitals of Zanjan due to spontaneous abortion. The sera were isolated and subjected to evaluate the anti-Toxoplasma IgG, IgM and IgA antibodies. The results showed IgG positive ($IgG^+$) in 99 cases (37.5%). A total of 68 women (25.8%) showed seroconversion with IgM or IgA or both IgM and IgA. They included: $IgM^+$ in 21 (8.0%), $IgA^+$ in 23 (8.7%) and both $IgM^+$ and $IgA^+$ in 24 (9.1%) subjects. In 23 cases, positive titers of IgM and IgG were accompanied. In general, the analysis of anti-Toxoplasma antibody patterns, showed that about 17% of the spontaneous abortions were associated with serological patterns of acute infection. According to these findings, a considerable proportion of spontaneous abortions can be attributed to T. gondii in the study area.

• Korean Journal of Veterinary Service
• /
• v.36 no.4
• /
• pp.303-309
• /
• 2013

This study was conducted to determine the content of 7 mycotoxins (aflatoxin $B_1$, $B_2$, $G_1$, $G_2$, $M_1$, ochratoxin A and zearalenone) using LC-MS/MS in pork available on the Korean markets. The analysis was carried out using following conditions; C18 column ($2.1{\times}100mm$, $1.7{\mu}m$), mobile phase composed of $H_2O$ (0.1 mM $NH_4Ac$ 0.01% HCOOH) : Methanol (0.1 mM $NH_4Ac$ 0.01% HCOOH), binary pump at a flow rate of 0.5 mL/min and $2{\mu}L$ of injection volume, MS/MS detector with ESI positive and negative mode. The quantication of mycotoxins was based on matrix-matched calibration curves with a correlation coefficient in excess of 0.99 for the 7 mycotoxins. The dectection limits were ranged 0.74~2.13 ng/g, with mean recoveries between 73.10~97.46% except aflatoxin $B_1$ (61.31%). We also monitored mycotoxin residues in 208 pork samples. The test results, mycotoxins were not found except one sample. Ochratoxin A in one sample of the test samples was detected below the quantification limit.

• Journal of Environmental Health Sciences
• /
• v.36 no.3
• /
• pp.191-198
• /
• 2010

The aim of this study was to determine the concentrations of air-borne microorganisms (bacteria, fungi, gram negative bacteria (GNB), endotoxins, and respirable suspended particles (RSPs), and their correlation with environmental parameters (temperature, humidity, and carbon dioxide levels) in duck houses. The mean concentrations of bacteria, fungi, and GNB were very high (> $10^6\;CFU/m^3$), and endotoxin levels exceeded $10^3\;EU/m^3$. Among the various work stages, in the task of receiving ducks, bacteria were $6.2{\times}10^6;CFU/m^3$, and GNB were $5.4{\times}10^6\;CFU/m^3$, while RSPs levels were $397.6\;{\mu}g/m^3$ and endotoxin levels were $47.2{\times}10^3\;EU/m^3$ in the task of dividing the ducks, and fungi were $4.9{\times}10^6\;CFU/m^3$ in the task of shipping the ducks. The concentrations of RSPs and endotoxins were significantly higher in tasks involving greater movement of ducks in the house, relative to tasks involving little movement of ducks (p<0.05). Further, with progression in growth of the ducks, the concentrations of bacteria, GNB, endotoxins, and RSPs were significantly increased. There was significant correlation between levels of GNB with bacteria (r=0.75) and fungi (r=0.86), endotoxins with RSPs (r=0.75), bacteria with fungi (r=0.39), and carbon dioxide with RSPs (r=0.38), bacteria (r=0.33), and endotoxins (r=0.31). These results suggest considerable respiratory hazard for farmers in these environments.

• Journal of Environmental Health Sciences
• /
• v.33 no.6
• /
• pp.506-512
• /
• 2007

This study was conducted to describe the exposure levels of welding fumes by the type of manufacturers, work process, welding type and the size of manufacturers, and to find out the trend of chronological changes of airborne welding fume levels. The subjects of this study were 509 manufacturers, consisting of 11 types of manufacturers, 3 work processes, 7 welding types, in Busan from January, 1997 to December, 2005. Airborne concentration of welding fume was determined by manual of National Institute for Occupational Safety and Health (NIOSH), and the data were analyzed by using SPSS 10.0 for Windows program. The mean concentration of airborne welding fume in all manufacturers was $1.29\;mg/m^3$ (Range: $0.01{\sim}3.00\;mg/m^3)$. The level of welding fume was the highest, as $1.96\;mg/m^3$, for manufactures of motor vehicles, trailers and semi-trailers, which was lower than $5.0\;mg/m^3$ of 8 hr-TWA in Korean permissible exposure limit for welding fume. There was a significant difference in the mean levels of welding fumes by work process, showing the highest in welding workshop ($1.39\;mg/m^3$), followed by pipeline welding workshop ($1.26\;mg/m^3$) and engineering workshop ($1.20\;mg/m^3$). Among welding types, the mean level of welding fume was the highest in the type of $CO_2$ & arc welding, as $1.46\;mg/m^3$, followed by $CO_2$ welding ($1.40\;mg/m^3$), shielded metal arc welding ($1.31\;mg/m^3$), spot welding ($1.27\;mg/m^3$), and so on. The highest mean level of welding fume was $1.58\;mg/m^3$ in work process of pipe line welding workshop for the manufacturers of basic iron and steel, and $2.27\;mg/m^3$ in the type of arc welding for the manufactures building ship and boats. By the size of manufacturers, the mean concentration of welding fume for manufactures in small scale with less than 50 workers was the highest as $1.45\;mg/m^3$ (Range: $0.07{\sim}3.00\;mg/m^3)$. The mean level of welding fume was the highest as $1.39\;mg/m^3$ both in 1997 and in 2005, showing a trend of fluctuating periodically within a range of $1.10{\sim}1.39\;mg/m^3$. The above results suggested that more effective control program for work environment producing welding fumes should be developed and applied since there were significant variations in welding fume levels by the type of manufacturers, work processes, welding types, the size of manufactures, and by year.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.1
• /
• pp.34-41
• /
• 2019

Objective: This study is conducted to evaluate airborne lead concentration in and around lead production plant. Methods: Airborne lead concentration was monitored simultaneously inside of the processes of lead recycling factory and outside of factory which include stack, boundary of factory and residential area 1 km and 7.5 km from factory, respectively. All samples were measured three times at 1.5 m from the ground and analyzed using inductively coupled plasma mass spectrometer, inductively coupled plasma optical emission spectrometer or flame atomic absorption spectrometer. Results: All airborne lead concentrations measured inside of factory($13.9{\mu}g/m^3-252.9{\mu}g/m^3$) and outside of factory($0.001{\mu}g/m^3-54.97{\mu}g/m^3$) showed log-normal distribution. Geometric mean lead concentration, $54.81{\mu}g/m^3$, measured inside of factory was significantly higher than outside of factory, $0.20{\mu}g/m^3$(p<0.01). Among the samples measured inside the factory, lead concentration was the highest in the refining process($59.02{\mu}g/m^3-252.9{\mu}g/m^3$). In the case of the samples outside the factory, the nearest chimney was the highest($3.84{\mu}g/m^3-54.97{\mu}g/m^3$), and the lead concentration at the farthest place, 7.5 km from the factory was the lowest($0.001{\mu}g/m^3-1.7{\mu}g/m^3$). The arithmetic lead concentration, $0.45{\mu}g/m^3$ in the residential area near the factory was below the atmospheric environment standard of $0.5{\mu}g/m^3$, but the maximum concentration of $3.4{\mu}g/m^3$ was exceeded. Conclusions: Airborne lead concentration in residential area, 1 km away from lead recycling plant, may exceed ambient air standard of $0.5{\mu}g/m^3$.