• Applied Biological Chemistry
• /
• v.37 no.5
• /
• pp.343-348
• /
• 1994

Ti plasmid of A. tumefaciens was labeled with $^3H-thymidine$, purified and encapsulated into phosphatidylserine (PS) and PS-cholesterol (Chol; 1 : 1 molar ratio) liposomes by lyophilization-rehydration method. PS was supplemented with 1 mole percent octadecyl rhodamine B for fluorometric measurement of PS. Liposomes entrapping $^3H-Ti plasmid$ were fused with Nicotiana sanderae protoplasts by treating with 5 mM $CaCl_2$ and 10% PEG. The fusion was evidenced by fluorescence microscopic technique. The amounts of Ti plasmid and PS associated with protoplasts were assayed by the radioactivity of $^3H-Ti plasmid$ and by the fluorescence of rhodamine B. About 7.9% of the PS liposome and 7.2% of PS-Chol liposome were fused with protoplasts. During the fusion process, about 30% of the liposomal contents of PS-Chol liposome was leaked, in contrast to about 60% leakage of its contents in PS liposome. Accounting the number of liposomes fused with protoplasts together with the encapsulation efficiency and the leakage of liposomal contents, it was calculated that ca. 1,700 Ti plasmid was transfered into one protoplast by the present method. This result may indicates that the present method transfers enough Ti plasmid into plant protoplast to elicit genetic transformation of plants.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.5
• /
• pp.43-50
• /
• 2006

Bioreporter bacteria, such as recombinant bioluminescent bacteria, have been used for the detection of specific compounds in complex environmental media. In this study, optimum conditions for the preparation and application of deep-freezed and Iyophilized recombinant bioluminescent strain KG1206 were investigated for the future application on contaminated environmental sites. Genetically engineered microorganism, Pseudomonas putida mt-2 KG1206, contains TOL plasmid and the plasmid inserted $P_{m}$, promoter on the upper part of lux gone in vector pUCD615, and m-toluate and benzoate are considered direct inducers for bioluminescence. Optimum conditions determined for the preparation and application of the deep-freezed and lyophilized strain were followings: cryoprotective agent (24% sucrose), lyophilization time (12 hrs), strain concentration ($OD_{600}=0.6$), reconstitution for freezed strain (quick reconstitution at $35^{\circ}C$), reconstitution for lyophilized strain ($3{\sim}6$ hrs exposure on LB medium), carrying conditions (keep at $20^{\circ}C$ after reconstitution). These results demonstrate the feasibility of deep-freezed or lyophilized state of genetically engineered bioluminescent strain for environmental usage.

• Journal of the Korean Chemical Society
• /
• v.7 no.2
• /
• pp.140-143
• /
• 1963

${\alpha}$-Ethyl-4,6-diiodo-2,3-dehydro-2,3,4,6-tetradeoxy-D-glucoside was synthesized from glucose through a modified Fischer et al. method. The yield of reduction process of an intermediate triacetylglucal, was markedly increased by utilizing lyophilization technique for removing the water in the reaction product.

• Journal of Microbiology
• /
• v.39 no.1
• /
• pp.67-73
• /
• 2001

A validation study was conducted to evaluate the efficacy and mechanism of the cryo-precipitation, monoclonal anti-FVIIIc antibody (mAb) chromatography, Q-Sepharose chromatography, and lyophilization steps involved in the manufacture of high purity factor VIII (GreenMono) from human plasma, in the removal and/or inactivation of hepatitis A virus (HAV). Samples from the relevant stages of the production process were spiked with HAV and subjected to scale-down processes mimicking the manufacture of the high purity factor VIII concentrate. Samples were collected at each step and immediately titrated using a 50% tissue culture infectious dose (TCID$\_$50/) and then the virus reduction factors were evaluated. HAV was effectively partitioned from factor VⅢ during cryo-precipitation with the log reduction factor of 3.2. The mAb chromatography was the most effective step far removal of HAV with the log reduction factor of $\geq$4.3. HAV infectivity was not detected in the fraction of factor VⅢ, while most of HAV infectivity was recovered in the fractions of flow through and wash during mAb chromatography. Q-Sepharose chromatography showed the lowest efficacy for partitioning HAV with the log reduction factor of 0.7. Lyophilization was an effective step in inactivating HAV with the log reduction factor of 2.3. The cumulative lag reduction factor, $\geq$10.5, achieved for tile entire manufacturing process was several magnitudes greater than the potential HAV load of current plasma pools.

• Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.250-254
• /
• 2009

Contamination of microcystins, a family of heptapeptide hepatotoxins, in eutrophic water bodies is a worldwide problem. Due to their poisoning effects on animals and humans, there is a requirement to characterize and quantify all microcystins present in a sample. As microcystins are, for most part, intracellular toxins produced by some genera of cyanobacteria, lysing cyanobacterial cells to release all microcystins is considered an important step. To date, although many cell lysis methods have been used, little work has been conducted comparing the results of those different methods. In this study, various methods for cell lysis and toxin extraction from the cell lysates were investigated, including sonication, bead beating, freeze/thaw, lyophilization and lysing with TritonX-100 surfactant. It was found that lyophilization, followed by extraction with 75% methanol, was the most effective for extracting toxins from Microcystis aeruginosa cells. Another important step prior to the analysis is removing impurities and concentrating the target analyte. For these purposes, a C18 Sep-Pak solid phase extraction cartridge was used, with the percentage of the eluent methanol also evaluated. As a result, methanol percentages higher than 75% appeared to be the best eluting solvent in terms of microcystin-leucine-arginine (MC-LR) recovery efficiency for the further chromatographic and mass spectrometric analyses.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.7 no.6
• /
• pp.340-346
• /
• 2002

The purpose of the present study was to examine the efficacy and mechanism of the PAB (para-amino benzamidine) affinity column chromatography, Viresolve NFP virus filtration, pasteurization (60$\^{C}$ heat treatment for 10 h), and lyophilization steps employed in the manufacture of urokinase from human urine as regards the removal and/or inactivation of the hepatitis A virus (HAV). Samples from the relevant stages of the production process were spiked with HAV and subjected to scale-down processes mimicking the manufacture of urokinase Samples were collected at each step, immediately titrated using a 50% tissue culture infectious dose (TCID$\_$50/), and the virus reduction factors evaluated. PAB chromatography was found to be an effective step for removing HAV with a log reduction factor of 3.24. HAV infectivity was rarely detected in the urokinase fraction, while most of the HAV infectivity was recovered in the unbound and wash fractions. HAV was completely removed during the Viresolve NFP filtration with a log reduction factor of $\geq$ 4.60. Pasteurization was also found to be an effective step in inactivating HAV where the titers were reduced from an initial titer of 7.18 log$\_$10/ TCID$\_$50/ to undetectable levels within 10 h of treatment. The log reduction factor achieved during pasteurization was $\geq$ 4.76. Lyophilization revealed the lowest efficacy for inactivating HAV with a log reduction factor of 1.48. The cumulative log reduction factor was $\geq$ 14.08. Accordingly, these results indicate that the production process for urokinase exhibited a sufficient HAV reducing capacity to achieve a high margin of virus safety.

• KSBB Journal
• /
• v.30 no.3
• /
• pp.109-113
• /
• 2015

Current drying and encapsulation methods for probiotics manufacturing are complicate and cost-burdened processes. The aim of this study was to develop a simple ingredient mixture to make probiotic granules via one-step process, providing not only a cryoprotective effect during freezing and drying but also high survival ratio in gastrointestinal tract. As cryoprotectans, commercially available ingredients including skim milk, monosaccharide (trehalose or glycerin), maltodextrins (with low or high degree of equivalents) were used. Their cryoprotective effect during lyophilization and survival ratios in artificial gastric juice and bile salt were measured against 3 strains of lactic acid bacteria (LAB) (Lactobacillus plantarum, Lb. brevis, and Lactococcus lactis). As results, 3 mixtures with different compositions showed a cryprotective effect on LAB tested and the best compostion was dependant upon LAB; skim milk 10%, trehalose 15%, glycerin 0.5%, and NaCl 1% was for Lb. plantarum and Lc. lactis, and maltodextrin 10% instead of skim milk was for Lb. brevis. In addition, those mixtures showed similar survival effect on LAB tested. These results demonstrate that skim milk or maltodextrins with trehalose, glycerin, and NACl can be effectively used for onestep lyophilization of LAB as an alternative method of encapsulation.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.249-254
• /
• 1997

ABA-type block copolymers composed of poly(L-leucine)(PLL) as the A component and poly(ethylene glycol)(PEG) as the B component were synthesized by ring-opening polymerization of L-leucine N-carboxyanhydride initiated by primary amino group located at both ends of PEG chain. A silver sulfadiazine(AgSD)-impregnated wound dressing of sponge-type was prepared by the lyophilization method. Morphological structure of this wound dressing obtained by scanning electron microscopy(SEM) was composed of a dense skin layer and a macroporous inner sponge layer. Equilibrium water content(EWC) of wound dressing was above 10%. It increased with an increased of PEO content in the block copolymer due to the hydrophilicity of PEO. AgSD release from AgSD- impregnated wound dressing in PBS buffer(pH=7.4) was dependent on PEG composition in the block copolymer. Therefore, EWC and release of AgSD can be control by PEG composition. Antibacterial capacity of AgSD-impregnated wound dressing was examined in agar plate against Pseudmonas aeruginosa and Stapplococus aruous. Cytotoxicity of the wound dressing was evaluated by studing mouse skin fibroblast(L929). From the behavior of antimicrobial releasing and the investigation of the suppression of bacterial proliferation, it was supposed that the wound dressing containing antibiotics could protect the wound surfaces from bacterial invasion to suppress the bacterial proliferation effectively. In cytotoxicity observation, cellular damage was reduced by the control led released of AgSD from the LEL sponge matrix of AgSD-medicated wound dressing. In vivo test, granulous tissue formation and wound contraction or the AgSD and DHEA impregnated wound dressing were aster than any other groups.

• Membrane Journal
• /
• v.13 no.2
• /
• pp.110-117
• /
• 2003

Sulfonated polyimides had been utilized and studied widely as available materials in chloro-alkali electrolysis, cationic exchange resins, and so on. However, a slow decrease in performance during experiments had been reported, which could be attributed to a loss of ionic conductivity related to either a continuous dehydration or polymer degradation. One of main reasons to account for the degradation of sulfonated polymers is the hydrolysis leading to polymer chain scission and decrement of molecular weight. Therefore, the objective of our study was to investigate possible imide cycle and additional ester bond cleavage connected with $SO_3$H presence under hydrated condition. In order to confirm and obtain as clear information as possible about breakages of bonds via $^1H\; and \;^{13}C$ NMR and IR spectroscopic analyses, our study was performed by model compound. Consequently, model compounds with both phthalic and naphthalenic imide ring and ester bonds were synthesized to evaluate the hydrolysis stability of sulfonated polyimide. The experiments were performed for prepared model compounds before and after aging in deionized water at $80^{\circ}C$ and were terminated by lyophilization technique. The aging products were finally analyzed by NMR and IR spectroscopy.

• Microbiology and Biotechnology Letters
• /
• v.25 no.1
• /
• pp.51-55
• /
• 1997

To utilize the alkaline protease produced by Halomonas sp. ES-10 as an enzyme detergent, the crude enzyme was obtained by methanol precipitation and lyophilization. And it was processed to coated enzyme.The best mixing ratio of components such as coated enzyme, builders, actives, fillers and adjuvants on detergency was examined, and temperature and pH influencing detergency were also tested. Detergency test 0.15% detergent solution was carried out on EMPA test cloth #116 with shaking(90 rpm) for 10 min after 30 min of pretreatment. The detergent which contained coated-enzyme 1%, Zeolite 4A 20%, Tween 80 1. 5%, sodium borate 30%, sodium meta silicate 7.5% and water 40% showed about 90% of washing efficiency at 40$\circ $C and pH 10.0.