• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.2
• /
• pp.198-203
• /
• 1993

The cyst of Scrippsiella trochoidea from the surface mud in Masan Bay was germinated in the incubator for the culture. This species was one of dinoflagellates responsible for the early spring bloom in the southern coastal water of Korea. The culture experiments were carried out under the various gradients of environmental factors to know their effects on the population growth of this dinoflagellate. With respect to the effects of environmental factors on the growth, it was proved that the maximum cell growth was occurred at 4,000 lux of light intensity, salinity $30\%0$ and temperature $20^{\circ}C$. When 0.25ml/ml of the filtrates of Skeletonema costatum culture medium and the supernatants of soil extracts were added to growth medium as organic growth stimulants, both materials enhanced the population growth. In the fatty acid composition of S. trochoidea, $C_{16:0}$ was the major component, and $C_{18:0},\;C_{18:1},\;C_{22:0}\;and\;C_{22:1}$ were a minor components.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.9 no.1
• /
• pp.61-68
• /
• 1976

For the artificial precocious breeding of abalone effects of changes in environmental parameters, water temperature and light period, on the induction of spawning have been studied. Subtidal specimens of Haliotis discus hannai were collected irregularly for 6 times from April to June 1975 in Chungmu Bay near Jukdo Island, the southern coast of Korea. One hundred and fifty specimens were reared in 4 aquarium tanks in the laboratory and in a creel submerged in the sea during the period of 60 days from April 24 to June 23, 1975. The all groups kept in the four tanks and a creel showed very high spawning rates $(70\~100\%)$, compared to those inhabited the natural environment at sea until right before the spawning time $(0\~50\%,\;average\;16.4\%)$. From the results of the present induced spawning, the parameters can be discussed as follows: It seems likely that photoenvironment may stimulate to produce and secrete some internal substances which may concern to giving the fertilizing ability to the eggs before spawning and to inducing spawning, but the temperature may not be a factor for this concern. For effective precocious breeding, it seems to require that abalones are to be realoed under controlled conditions of darkness below 2,000 lux even during day time for more than 60 days before inducing spawning.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2016

This study was conducted by survey and inspection of stair passage leading lights in shopping buildings which are more than 5 stories and have an underground parking lot located at Pyeongtaek-si and Seongnam-si. Number of shopping building for this study is 30 and of stair passage leading light inspected by two lights in each shopping building is 60. The result of this study is that the type of installed leading lights is LED(77%), and 60% of leading lights has problem such as no cleaning, scratch and discoloration, etc. The height of installed leading lights meets the fire law which is less than 1m from the floor. Visible condition of leading lights is good except some leading lights which have a little visible problem due to banner advertisement. 37% of standby power has flickered and went out. 93% of total leading lights meets the fire law which is more than 1lux from 0.5m distance, but cold cathode fluorescent lamps(CCFLs) have the problem which not meets proper brightness level based on fire law. In additional measurement result, zero lux of leading lights is 32%(from 1m distance), 68%(from 1.5m distance) and 98%(from 2m distance). Leading light is very important facility because it is eyes and guide when emergency. Therefore, proper fire facility operating function inspection and total detailed inspection are important to keep the good condition of leading light except simple visual check, and also improvement in law system of type approval, fire construction inspection and illumination level will be needed.

• Korean Journal of Materials Research
• /
• v.10 no.1
• /
• pp.7-14
• /
• 2000

The object of this study was to improve electrophotographic photoreceptor using metal free-phthalocyanine dye sensitized system. In here a various types of metal free-phthalocyanine and polymers and hydrazone were used as charge generation material(CGM) and binder, respectively, and also the hydrazone derivative or zinc complex was used as charge transport material(CTM). It was found that $x-H_2Pc$ showed the highest sensitivity among the ${\alpha}-$, ${\beta}-$ and x- metal free-phthalocyanine($x-H_2Pc$) as CGM. The photoreceptor made by $x-H_2Pc$ and hydrazone derivative as CGM and CTM, respectively, showed the highest ratio of dark decay having 73.1% and the good sensitivity of $1.50lux{\cdot}sec$ compared to other photoreceptors.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.533-538
• /
• 2017

In this thesis, the ambulatory aid mechanism was implemented so that blind people could be safer at risk of walking outdoors. Using ultrasonic sensors, the obstacles can be detected when the distance between the obstacle is within 50 cm of the obstacle. If the light sensor becomes less than 25 lux, the LED will automatically turn on and help the safety of the visually impaired and the security of sight of the peripheral walkers. Color recognition sensors increase the rate of recognition of yellow color by the detection distance is 1cm, it vibrated when yellow light was detected. Using GPS with 7.3 m of error range, the guardian was able to check the location of the visually impaired.

• Journal of the Korean Society of Costume
• /
• v.34
• /
• pp.109-120
• /
• 1997

The conservation of collections in muse-ums is an important aspect for our her-itage. The control of museum environment is a vital factor in the preservation of cool-lections. Inappropriate or fluctuating envi-ronmental conditions can cause irreparable damage to works of arts. In this research we investigated the ac-tual conditions of museum environment for old testiles using questionnaire and mea-sured dye fasing of old textiles on exhibi-tion for 2 months in a university museum the major results are as follows: 1. The control of temperature and rela-tive humidity is a vital factors I the preservation of old textiles in museum generally acceptable temperature and rel-ative humidity standards for old textiles are 18-23$^{\circ}C$ and 50-65% R. H and light level for textiles on exhibition should be limited to 30-50 lux. 2, In university museums the limate control system in exhibition and storage area is in an early stage. Therefore to minimize the deterioration of old textiles the best method of controlling the envi-ronment is to have centralized climate control system in sorage area as well as in display area. 3. Conservator is needed to maintain collections scientifically. Only professional conservator by combining scientific tech-nical and artistic training has the exper-tise needed to maintain the physical in-tegrity of old textiles. In order to solve the inferior environment of museums the staff should recognize the importance of the condition of exhibition and storage. 4. Old textiles are susceptible to damage by light and associated heat. Dyed textiles which have been exhibited under the light without any UV filter were faded notice-ably within two months of exhibition. Light levels for textiles on exhibition should be limited to 30-50 lux. It is de-sirable to use special light source that can absorb UV. and UV filter is also recom-mended to reduce photodegradation of old textiles.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.217-217
• /
• 2017

Seed priming leading to improved emergences, germination speed and uniformity under unfavorable conditions without loss of longevity are the best level of techniques. We studied the possibility to obtain primed seed with reduced mean germination time (MGT) and uniformity but with simple, fast and effective methods. The experiments were carried out at $15^{\circ}C$ for 16 hours with priming treatment. To compare the effects of each treatment, we used 200mM $CaCl_2$ priming or hydro priming or no imbibition after ultrasonication or red light treatment. The light treatment was performed by irradiating 2000 lux of red light for 15, 30, 60, and 120 minutes. Addition, in order to investigate the effect of the priming solution, treated at 200mM $CaCl_2$ for 8 hours. Ultrasonication treatment was performed for 5, 10, and 20 minutes at exposures of 13.0, 17.3, and 21.6 kHz during priming. For liquid smoke (LS) treatment, seed soaked in 0%, 0.5%, 1.0%, 5.0% and 10.0% of diluted water and 200mM $CaCl_2$ solution. After each treatment, the seeds were dried to moisture content ranged 5-8% at $25^{\circ}C$ for 24 hours. The effect of seed treatment was evaluated with germination percentage (GP), MGT, germination index(GI), germination rate(GR), Germination Uniformity(GU) and heath seed percentage(HS). For several factors tested, we found that the desired germination improvement could be obtained by treating the seed with ultrasonication at 17.3 kHz for 5 minutes in water or red light exposure at 2000 lux for 120 min in water that resulted very similar to those used to 200mM $CaCl_2$ priming for 16 hrs. However, LS treatment showed no improvement in all diluted solution. Therefore, the methods applied ultrasonication and red light treatment showed high potential for fast and easy treatment avoiding pollution of salt solution waste.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.4
• /
• pp.294-301
• /
• 2017

PURPOSE. Temperature increase of $5.5^{\circ}C$ can cause damage or necrosis of the pulp. Increasing temperature can be caused not only by mechanical factors, e.g. grinding, but also by exothermic polymerization reactions of resin materials. The aim of this study was to evaluate influences of the form material on the intrapulpal temperature during the polymerization of different self-curing resin materials for temporary restorations. MATERIALS AND METHODS. 30 provisonal bridges were made of 5 resin materials: Prevision Temp (Pre), Protemp 4 (Pro), Luxatemp Star (Lux), Structure 3 (Str) and an experimental material (Exp). Moulds made of alginate (A) and of silicone (S) and vacuum formed moulds (V) were used to build 10 bridges each on a special experimental setup. The intrapulpal temperatures of three abutment teeth (a canine, a premolar, and a molar,) were measured during the polymerization every second under isothermal conditions. Comparisons of the maximum temperature ($T_{Max}$) and the time until the maximum temperature ($t_{TMax}$) were performed using ANOVA and Tukey Test. RESULTS. Using alginate as the mould material resulted in a cooling effect for every resin material. Using the vacuum formed mould, $T_{Max}$ increased significantly compared to alginate (P<.001) and silicone (P<.001). In groups Lux, Pro, and Pre, $t_{TMax}$ increased when the vacuum formed moulds were used. In groups Exp and Str, there was no influence of the mould material on $t_{TMax}$. CONCLUSION. All of the mould materials are suitable for clinical use if the intraoral application time does not exceed the manufacturer's instructions for the resin materials.

• Journal of Mushroom
• /
• v.15 no.3
• /
• pp.104-110
• /
• 2017

In order to determine the possibility of artificial cultivation of Ganoderma lucidum, a study was carried out to optimize the medium composition used for bed culture. Sawdust spawn of medium composition for optimal growth was found to be the combination of 75% oak-sawdust, 10% cotton-seed meal, and 15% beet pulp. The optimal conditions for the formation of fruiting bodies were shown to be a temperature of $28-30^{\circ}C$, light intensity of 1,000-1,500 lux, and $CO_2$ concentration of 1%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.666-671
• /
• 2016

This paper introduces a device providing close local lighting to the affected part, where the operation-purpose astral lamp alone cannot shed light directly, in an operation room of hospitals or clinics, which helps clinical doctors perform safe treatment of the affected part deep inside a human body. This medical assisting lighting is a device necessary to prevent fatal operation failures, which can occur with minute operation processes, such as tumor removal or angiorrhaphy. The components, such as the light source and power supply were designed to be low power consuming and small in size, have a narrow angle lens was used to increase the light spreading effect and focused illumination. The end-caps of the light transmission device using an optical cable and the lighting device were designed in the waterproof type to enable disinfection of these devices after use for the next patients. According to the measurement of the light source properties made after development of the retractor lighting device, the illumination intensity was 490 lux, the brightness was $11,550cd/m^2$, general color rendering index was 78, color temperature was 11,000K, and the intensity distribution was even, which were confirmed to be adequate for medical assisting local lighting.