• The Research Journal of the Costume Culture
• /
• v.15 no.2 s.67
• /
• pp.214-220
• /
• 2007

The purpose of this study is to derive the use of the luminous source corresponding to the intention and contribute to product display by visually evaluating the relations between luminous source and colors, analyzing and reviewing the subjective perceptions depending on the luminous source, and clarifying the colors of artificial luminous source that look close to natural lights by each color. Hence, the researcher objectified the subjective evaluation for which they used sensory evaluation method with four colors of luminous sources(natural colors, 2800K, 4200K, and 6500K) and five colors of textiles(purple, blue, green, yellow, and red) by quantifying the evaluation. As a result, we could obtain the conclusion as follows. As for the temperature of textile colors under artificial luminous sources that appeared most close to the colors of textiles under natural luminous sources, 6500K was most frequent, and the temperature of the luminous sources that appeared most different was 2800K. However, as there were also 4200K colors that looked most close to the textile colors under natural light source, it was observed that the temperature differs depending on the textile colors. In addition, less glossy textiles exhibited more visual changes by luminous source colors than comparatively more glossy textiles, and it was observed that the most influenced color was purple, as purple has shown the largest difference among colors.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.2
• /
• pp.369-372
• /
• 2009

When measuring the luminous flux of a light source at the integrating sphere photometer, it can know the luminous flux to compare the standard lamp with the specimen lamp at the same location. But in case of PLS(plasma lighting system, microwave discharged lamp), that two lamps are cannot be the same location. If the reference illuminant and specimen lamp are cannot measure identical location, we should measure the variation of the luminous flux. For the outcome we can turn out a correction factor to revise and reflect it. But the better way is calibrate the specimen lamp locate the identical location of reference illuminant measured. In this thesis, we've test to find the correction factor for consider that change the measuring location. And it turns out the correction factor. From this, it presents the result to make a select for the reference illuminant which is against the illuminant type for newly produce.

• KIEAE Journal
• /
• v.7 no.5
• /
• pp.29-34
• /
• 2007

Discomfort glare from windows is an important issue in window and daylighting design. This study aims to investigate the effect of luminance difference between the lower and the upper part of a large glare source. Experiments were conducted using a luminous body divided into two parts, the upper part and the lower part. The degree of discomfort glare from the luminous body was examined. The result shows that the part with lower luminance is perceived as a glare source when the part has higher luminance then the background luminance. The degree of discomfort glare was estimated for the experimental conditions, and compared to the observations. The estimation was made using two methods: one summed the glare sensation for each section, and the other used the average luminance of the whole luminous body. The result of the comparison shows that the method using the average luminance has approximate values to the observations. Consequently, the use of the average luminance was proposed for evaluation of discomfort glare from non-uniform large glare sources.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1161-1164
• /
• 2005

A Mercury-free, flat light source which shows high luminance and luminous efficiency simultaneously has been developed. An electrodeless, dielectric barrier discharge is used to generate the plasma using Ne-Xe mixture gas of relatively low gas pressure of a few tens torr in a 4.1 inch diagonal size of flat panel. The basic properties of the long gap glow discharge and its accompanying instabilities, which prevents us from having high luminous efficiency discharge have been analyzed. A new structure and optimized driving methods have been used to generate a glow discharge which shows a wide voltage margin of a few hundred volts. The luminous efficiency and luminance could be 110 lm/W at $1300\;cd/m^2$ and 50 lm/W at $5500\;cd/m^2$.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.7
• /
• pp.314-318
• /
• 2003

This paper describes the construction, measurement, and characterization of an instrument for the distribution of luminous flux. This is done by measuring the flux around a light source while a detector and a source is rotating, and integrating it over an entire imaginary surface surrounding the source. We make a gonio radiometer to realize the scales of total luminous flux and geometrically integrate to get total spectral flux from standards of irradiance and illuminance. The uncertainties of a total flux in the gonioradiometry are 1.3%, and 0.4% below the standard lamps of NIST and NIM for each other.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.3
• /
• pp.20-26
• /
• 2004

In this paper, luminaire optical efficiency and luminous intensity according to array of HB(high brightness) white LED(light emitting diode) and globe types of luminaire were simulated by computer and made a comparative analysis. LEDs were arranged by square of 7ea X 7ea. LED space has been divided into 8.2mm, 10mm and 15mm that mean distances between luminous centers of LEDs, and luminaire globes were classified into 30mm and 50mm 묘묘 from luminous center of LEDs. Also the simulations were made with / without globe, globe types were specified by convex and embossing types of which sizes are 8.2mm and 5.0mm, So total 27 classes of simulation were performed. This paper is to help luminire development using LED light source called digital lighting of 21th century, by studying luminire effciency and luminous intensity of different types of globes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.743-744
• /
• 2010

• Fashion & Textile Research Journal
• /
• v.8 no.6
• /
• pp.721-726
• /
• 2006

In this article I visually assessed the relation between luminous source and color, and analyzed subjective recognition of color by light source and image of color, aiming at giving guidelines in selecting source of light suitable for each purpose, thereby contributing to enhanced quality of life. For this purpose, I subjectized, by applying a quantitative method, the objective measurement that employs sensory evaluation method for 14 categories of color, light and feelings in visual perception of textile colors (blue, green and yellow) by color of light source (color temperature of 2800K, 4200K and 6500K), Followings are the conclusions derived form this study. Colors of textile were differently perceived according to the color of light source. When examining common recognition of textiles in blue, green and yellow, 2800K was said to give dirty, soft and blurred image, as for 4200K clear, wide and fine feelings were said, and pure, vivid, refined and bright image were marked for 6500K. As for 2800K, it got the most low appraisals compared with others. In conclusion, image and feeling of the same colors can differ according to light source, which indicates the importance of appropriate selection of light source for purpose of use. As for yellow, the number of assessment result that shows significant difference was the smallest among the three colors. So, it can be concluded that when we consider the recognition of color in mixing different colors, mixing with yellow can result in difficulty in visually perceiving difference of colors. Therefore, it is regarded that more considerable attention is required when dealing with yellow color.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.1
• /
• pp.9-17
• /
• 2011

Development of high efficiency and eco-friendly LED source has been progressed continuously. Also, by nation's regulations, public institutions have changed existing luminaires to LED luminaires. However, there are several differences between existing luminaires and the intensity distribution of general planar LED luminaires. In case of changing existing luminaires to LED luminaires, by such differences, there are inefficiencies both quality aspect and energy aspect in luminous environment. Therefore, this study aims to conduct a study on the changes of intensity distribution and luminous environment by reflector shapes in indirect reflected LED luminaires with software for optical design of a luminaire (Photopia 2.0) and lighting design of a space (ReluxPro). This study shows the changes of intensity distribution and luminous environment of indirect reflected LED luminaires and indirect fluorescent lamp luminaires by reflector shapes.

• Journal of Mushroom
• /
• v.15 no.4
• /
• pp.195-201
• /
• 2017

We measured the antioxidant activities of Oak mushroom (Lentinula edodes) in browned sawdust medium under conditions of varying LED sources and amounts of light. Consequently, exposure to 200Lx blue LED resulted in highly efficient browning; the most efficient browning was shown at 200Lx, regardless of the type of luminous source. We identified that quantities obtained with the blue luminous source increased compared to those in other treatment plots. The DPPH radical scavenging test conducted to examine antioxidant activity revealed that the red luminous source caused high radical scavenging compared to efficient browning. The fruiting body for Nongjin-go, as a treatment plot with the highest scavenging, under a 400Lx red luminous source was $34.3{\pm}1.80%$ and that for 'Sanjo 701' at a 300lx red luminous source was $32.99{\pm}1.58%$. The polyphenol content, reported to be correlated with DPPH radial scavenging, showed no similar correlation in the 'Nongjin-go' variety. By contrast, 'Sanjo 701' showed a similar association.