• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.962-964
• /
• 1999

We studied emitting properties of devices fabricated using the spin-coating and Langmuir-Blodgett[LB] technique. The LB technique has the advantage of precise control of the thickness better than spin-coating method. Poly(3-hexylthiophene)[P3HT] LB films used as the emitting layer in light-emitting devices. LB monolayers were deposited 27 layers onto the indium-tin-oxide[ITO] as Y-type films by the vertical dipping method. The thickness is about 80nm. Absorption spectrum of LB films presented that P3HT is regiorandom conformation. Also, current-voltage-luminance characteristics and electroluminescence spectra of light-emitting devices fabricated by LB method is studied. In current-voltage-luminescence characteristics, turn-on voltage of P3HT LB film LEDs is higher than that of spin-coating LEDs. But electroluminescence spectrum is similar to the spin-coating LEDs. The orange-red light was clearly visible in a darkened room.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.20 no.4
• /
• pp.371-382
• /
• 2022

Carbonates are inorganic ligands that are abundant in natural groundwater. They strongly influence radionuclide mobility by forming strong complexes, thereby increasing solubility and reducing soil absorption rates. We characterized the spectroscopic properties of Am(III)-carbonate species using UV-Vis absorption and time-resolved laser-induced fluorescence spectroscopy. The deconvoluted absorption spectra of aqueous Am(CO₃)₂^- and Am(CO₃)₃^3- species were identified at red-shifted positions with lower molar absorption coefficients compared to the absorption spectrum of aqua Am³⁺. The luminescence spectrum of Am(CO₃)₃^3- was red-shifted from 688 nm for Am³⁺ to 695 nm with enhanced intensity and an extended lifetime. Colloidal Am(III)-carbonate compounds exhibited absorption at approximately 506 nm but had non-luminescent properties. Slow formation of colloidal particles was monitored based on the absorption spectral changes over the sample aging time. The experimental results showed that the solubility of Am(III) in carbonate solutions was higher than the predicted values from the thermodynamic constants in OECD-NEA reviews. These results emphasize the importance of kinetic parameters as well as thermodynamic constants to predict radionuclide migration. The identified spectroscopic properties of Am(III)-carbonate species enable monitoring time-dependent species evolution in addition to determining the thermodynamics of Am(III) in carbonate systems.

• Journal of Information Display
• /
• v.2 no.3
• /
• pp.13-17
• /
• 2001

The manganese-doped magnesium tin oxide with spinel structure was selected as a green phosphor for FED application and was synthesized by the solid state reaction. Its luminescence properties were investigated under low-voltage electron excitation. The $Mg_2SnO_4$:Mn phosphor showed green emission with the spectrum centered at 500 nm due to energy transfer from $^4T_1$ to $^6A_1$ of $Mn^{2+}$ ion. Optimum Mn concentration was 0.6 mole % and the decay time was shorter than 10 ms.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.195-198
• /
• 2014

$Fuel/N_2$ and fuel/air mixtures were treated with non-thermal DBD plasma and the changes in characteristics of laminar diffusion flame have been observed. Flame of $Fuel/N_2$ mixture generated more soot under plasma condition while less amount of soot was formed from fuel/air mixture flame. Luminescence spectrum and gas chromatography results confirmed that plasma energy converts a fraction of fuel molecules into radicals, which then form $C_2$, $C_3$, $C_4$ and higher hydrocarbon under no oxygen condition or turn into CO, $CO_2$ and $H_2O$ when oxygen is present.

• The Korean Journal of Ceramics
• /
• v.1 no.3
• /
• pp.152-154
• /
• 1995

A non-hydrolytic sol-gel process was developed to fabricate low-hydroxyl hard gels. The reaction of tert-butyl alcohol with silicon halides provided transparent low-hydroxyl hard gels. Some properties such as transparency, density, and refractive index was successfully doped into the hard gel matrices. The absorption spectrum of an erbium-doped methylsilsesquioxane was investigated to decide the pumping wavelength of an argon laser. The luminescence of the erbium-doped gel at 664 nm seems to be due to $4^F{9/2}\to 4^I_{15/2}$ transition.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1355-1359
• /
• 2006

Due to its efficient red emission, $Eu^{3+}$ ion has been doped in various host materials. $GdCa_4B_3O_{10}:Eu^{3+}$ phosphor for red emission has been prepared by solid state reaction. Photoluminescence properties for the phosphor under UV and VUV excitation were investigated. The $GdCa_4B_3O_{10}:Eu^{3+}$ phosphor under both excitation conditions shows typical red emission spectrum centered at 611 nm with several weak peaks due to energy transfer from $^5D_O\;to\;^7F_J(J=1,2,3,4)$ of $Eu^{3+}$ ion. On the other hand, the activator content exhibiting the concentration quenching under UV and VUV irradiation is 10 mole% and 2.5 mole%, respectively.

• Rapid Communication in Photoscience
• /
• v.2 no.1
• /
• pp.34-37
• /
• 2013

Two novel antenna complexes of $Eu^{III}$ with 1-naphthoic acid (NA) as primary ligand and two aromatic N-donor ligands namely N-hexyl-N-(pyridin-2-yl) pyridin-2-amine (1) and 4-((dipyridin-2-ylamino)methyl)benzoic acid (2) have been synthesized and characterized by various spectroscopic techniques. The room-temperature (298 K) photoluminescence spectrum of $Eu^{III}$ complexes composed of typical line like emissions, assigned to transitions between the first excited state $^5D_0$ to the $^7F_J$ (J = 0-4), resulting in red emission along with the residual emission from the 1-naphthoic acid moiety in the blue region. The determined CIE color coordinate value for the complex 2 is (x = 0.36, y = 0.34), which is in white region.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.37-39
• /
• 1996

A hydride vapor phase epitaxy (HVPE) method was performed to prepare the GaN thick-films on c-plane sapphire substrates. The full-width at half maximum of double crystal X-ray rocking curve from 350${\mu}{\textrm}{m}$ thick GaN was 576 arcsecond. The photo- luminescence spectrum measured (at room temperature) show the narrow bound exciton(I$_2$) line and weak donor-acceptor pair recombination peak, however, there was not observed deep donor-acceptor pare recombination indicate the GaN crystals prepared in this study are of high purity and high crystalline quality.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.8
• /
• pp.1111-1115
• /
• 2002

The photoluminescence of calixarene crystals has been studied as functions of temperature, time, and concentration. The vibronic bands shift to longer wavelength and become significantly sharper as temperature decreases. The experimental results r eveal that the structural transformation occur during the annealing process. Time-resolved spectra of calixarene at 12 K are monitored. Spectral features, which demonstrate characteristic of energy transfer processes, are not observed. The depopulation of excited state density is mainly controlled by unimolecular decay process dominating other decay processes. The lifetime was found to be 2.6 $\pm$ 0.1 ns. For the case of calixarene mixed with naphthalene, the fluorescence spectrum shows that the band centered at 340 nm lies 2840 $cm^{-1}$ below the relatively broad 310 nm band found for calixarene crystals. The spectra also exhibit that the emission intensity increases with increasing calixarene concentration. The results are evident that the calixarene emission is quenched by the naphthalene. Phosphorescence of calixarene mixed with naphthalene crystals is observed to determine whether the emission is due to naphthalene. The phosphorescence peaks were compared with the ground-state vibrational frequencies of naphthalene and found to be in good agreement. The results indicate that inter-molecular energy transfer occurs between calixarene and naphthalene.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1998.11a
• /
• pp.9-11
• /
• 1998

A phenomenon of electroluminescent radiate as electric field applied in the phosphor, in this paper, we produced the Powder Electroluminescent Device(PELD) which was changing the structure and the thickness of phosphor and insulator for realization of the PELD with high brightness. We made PELD with structure that is WK-1(ITO film/Phosphor/Insulator/Electrode), WK-2(ITO film/Phosphor/Insulator/Electro de), WK-3(ITO film/Phosphor/Insulator/Electrode), WK-4(ITO film/Phosphor+Insulator/ Electrode). The property of the produced PELD are analyzed by measuring the spectrum which electrical and optical property, the brightness and the transferred charge density. In this result, the structure of WK-4 have good luminescence property than others, it's effective thickness is 60${\mu}{\textrm}{m}$. At 100V 400Hz, High brightness of 2700cd/m2 was performed.