• 제목/요약/키워드: lubricity

검색결과 74건 처리시간 0.026초

윤활성 및 압연기 청정성을 겸비한 냉간 압연유의 개발 (Development of a Cold Rolling Oil with Lubricity and Mill Cleanness Property)

  • 한석영;송교봉;이준정
    • Tribology and Lubricants
    • /
    • 제13권2호
    • /
    • pp.74-81
    • /
    • 1997
  • The purpose of this study is to develop a cold rolling oil with lubricity and mill cleanness property under the rolling conditions of high reduction ratio and high rolling speed. Six kinds of oil samples were blended. Evaluation of lubricity and anti-seizuro property of the samples were carried out with a laboratory scale rolling mill, where the contact conditions between work roll and strip are very close to actual cold rolling mill. Laboratory evaluation for dispersion, contamination, anti-oil stain property and residual carbon, etc. were carried out with several testers such as longterm circulation tester, Coulter counter and Conradson tester. A new high speed cold rolling oil with good lubricity and mill cleanness property was developed compared with the previously developed rolling oil.

기유와 극압제가 압연유의 윤활성 및 내소부성에 미치는 영향 (Influence of Base Oils and Extreme Pressure Additives on Lubricity and Anti-Seizure Property of Lubricant in Cold Rolling)

  • 한석영;송교봉;이준정
    • 대한기계학회논문집
    • /
    • 제16권7호
    • /
    • pp.1363-1372
    • /
    • 1992
  • 본 연구에서는 고속 냉간 압연유를 개발하기 위한 기초 연구로써 압연유의 기본이 되는 기유의 종류와 압연유에 첨가되는 각종 첨가제중 고속, 고압하 압연에서 가장 문제가 되는 히트 스크래치를 방지하는 역할을 하는 극압제의 종류 및 함량이 압연유의 윤활성과 내소부성에 어떠한 영향을 주는가를 소다식 진자형 마찰계수 시험 기, Falex 시험기 그리고 Four Ball 시험기와 같은 실험실적 평가방법과는 달리 실제 롤과 스트립 사이의 접촉조건이 상사한 시험압연기를 사용한 윤활성 및 내소부성 평가 실험을 통하여 검토하였다. 본 평가 실험에 사용된 시험압연기는 압하배분, 압연 채 터링(chattering), 장력 제어, 압연윤활 특성, 압연재 형상 제어, 이주속 압연특성 등 을 시험할 수 있는 다목적 냉간압연기로써 그 구조와 제원을 Fig.1과 Table 1에 나타 내었다. 또한 극압제를 함우하고 있는 압연유와 스트립 표면간의 화학반응에 의한 극압막의 존재여부를 확인하기 위하여 EDS(energy dispersive spectrometer) 분석법과 ESCA (electron spectroscopy for chemical analysis) 분석법을 이용하여 분석하였다.

접촉압력을 고려한 R-134a용 냉도기유의 윤활성 평가 연구

  • 나병철;전경진;한동철
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 1997년도 제26회 추계학술대회
    • /
    • pp.145-151
    • /
    • 1997
  • PAG(Polyalkylene Glycol) and esters are tested with HFC-134a as a refrigeration oil. This investigation enhances the testing method by taking the compressor's environment into account. A testing environment charged with refrigerant gas more closely simulates the conditions of a compressor. The friction coetTicient of the PAG/HFC-134a system is similar to that of the mineral oil/CFC-12 system at operating conditions. Ester oils are preferable at the start & stop condition in the lubricity aspect. PAG shows good lubricity in conditions of extreme contact pressure. Consequently, this test provides reliable results on compressor lubricity of refrigeration oils with HFC-134a. It suggests a methodological way for the proper selection of refrigeration oils that may improve the durability and performance of a compressor.

  • PDF

다양한 원료에 따른 발전용 바이오중유의 윤활 특성 연구 (Study on the Lubricity Characteristics of Bio-heavy Oil for Power Generation by Various feedstocks)

  • 김재곤;장은정;전철환;황인하;나병기
    • 한국응용과학기술학회지
    • /
    • 제35권4호
    • /
    • pp.985-994
    • /
    • 2018
  • 바이오중유란 다양한 동 식물성 유지, 지방산 메틸에스테르, 지방산 에틸에스테르 및 그 부산물을 혼합하여 제조된 제품이며, 국내 기력 중유발전기의 연료(B-C)로 사용되고 있다. 그러나 이러한 바이오중유의 원료 조성 때문에 발전기의 보일러로 이송되는 연료펌프, 유량펌프, 인젝터 등의 연료 공급시스템에서 마찰마모를 유발할 경우 심각한 피해를 초래 할 수 있다. 따라서, 본 연구에서는 발전용 바이오중유의 다양한 원료들의 연료특성과 이에 따른 윤활성을 평가하고, 발전기의 마찰마모 저감을 위한 발전용 바이오중유의 연료 구성 방안을 제시하였다. 발전용 바이오중유 원료물질의 윤활성(HFRR)은 평균 $137{\mu}m$이며, 원료물질에 따라 차이가 있으나 $60{\mu}m{\sim}214{\mu}m$ 분포를 보이고 있다. 이 중 윤활성이 좋은 순서는 Oleo pitch > BD pitch > CNSL > Animal fat > RBDPO > PAO > Dark oil > Food waste oil이다. 발전용 바이오중유의 원료 물질 3종으로 구성된 바이오중유 평가시료 5종에 대한 윤활성은 평균 $151{\mu}m$이며, $101{\mu}m{\sim}185{\mu}m$ 분포를 보이고 있다. 이 중 윤활성이 좋은 순서는 Fuel 1 > Fuel 3 > Fuel 4 > Fuel 2 > Fuel 5이다. 바이오중유 평가시료(평균 $151{\mu}m$)는 C중유($128{\mu}m$) 대비 낮은 윤활성을 나타내었다. 이는 발전용 바이오중유가 지방산 물질로 구성되어 있어 C중유보다 파라핀, 방향족 성분 함량이 낮아 점도가 낮고, 산가가 높기 때문에 산성 성분에 의한 윤활막 형성 저해에 따른 것으로 판단된다. 따라서, 적정 수준의 마찰마모 저감을 위해 윤활성을 증가 시킬 수 있는 바이오중유의 원료로서 Oleo pitch, BD pitch를 60% 이상 함유할 경우 연료 제조 시 윤활성 증가가 예상된다.

SRV를 사용한 기어유의 윤활성 평가 (Lubricity Evaluation of Gear Oil By SRV Tester)

  • 윤혁채;이기헌;이명구;조원호
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2003년도 학술대회지
    • /
    • pp.181-184
    • /
    • 2003
  • The Four-Ball Tester has been widely used as a tool to charaterize lubricity for long time. In order to understand more acurate properties of lubricants, more test methods have been developed. Among the test methods, SRV test method was compared to Four-Ball Tester in this paper.

  • PDF

냉간압연Tribo-Simulator에 의한 냉간압연유 윤활성 평가시험 (Test for Lubricity Evaluation by Cold Rolling Tribosimulator)

  • 김철희
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2003년도 학술대회지
    • /
    • pp.158-163
    • /
    • 2003
  • Several simulation techniques have been developed which are not practical deformation processes but are designed to embody specific tribological aspects. Sliding rolling type friction test machine (Cold rolling tribosimulator) was developed to simulate the tribological phenomena at the roll bite in real mill by laboratory scale. A rolled material is fed at a low speed of Max. 1/20 to that of roll speed, so as to obtain simultaneous plastic deformation in the material during rotation of the rolls in simulator. New cold rolling tribe-simulator is effective for evaluation of the lubricity of lubricant in cold rolling process.

  • PDF

하이브리드 절연필름의 전동기권선 적용 특성 연구 (Technology and Application of Hybrid Insulation Film for Electric Magnet Wire)

  • 한세원;한동희;강동필
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
    • /
    • pp.210-211
    • /
    • 2006
  • This study presents the technology and application of hybrid insulation film for electric magnet wire. In order to make the high efficient motor with high space factor, it is necessary to develop a self-lubrication heat-resistant insulation film that can be used when the space factor 70% or more. A key to achieving high windability is to increase the lubricity and bonding strength of vanish, which for a magnet wire generally determines the mechanical scratches characteristics. Effective ways to reduce scratches include improving insulation film prepared by organic and inorganic hybrid synthesis methods.

  • PDF

남극유 대체연료 적합성 연구 (Study of Alternative Fuel Suitability for Special Antarctic Blend Diesel)

  • 임영관;김지연;김종렬;하종한
    • 공업화학
    • /
    • 제28권4호
    • /
    • pp.460-466
    • /
    • 2017
  • 극지방은 혹한의 날씨로 인해 일반 석유제품을 사용할 경우, 석유제품 내 왁스 성분 등이 고체상으로 석출되어 원활한 연료공급 등에 문제발생을 일으킬 수 있다. 따라서 극지방에서 사용하는 석유제품은 혹한의 온도에 적합하게 생산, 판매되고 있지만 해외로부터 공급받고 있어, 수급의 어려움이 존재한다. 본 연구에서는 기존 남극유를 대체할 수 있는 석유제품을 검토하기 위해 기존 연료에 대한 연료적 특성을 분석한 뒤, 저온특성이 우수한 항공유에 윤활성 향상제를 일정농도 첨가하여, 남극유 대체연료로서 연료적 특성을 분석하였다. 분석결과, 윤활성 향상제인 R621A제품의 윤활성이 가장 우수하였으며, 윤활성 향상제 첨가량이 증가할수록 윤활성이 증가하였지만, 1000 mg/L만 첨가하여도 충분한 윤활성 향상효과를 보였다. 따라서 항공유에 윤활성 향상제를 첨가한 대체연료는 극지방의 혹한 기온에서 사용하여도 큰 문제가 없을 것으로 판단된다.

경유의 윤활 성능 향상을 위한 식물유 기반 알칸올 아마이드의 합성 (Synthesis of Vegetable-based Alkanol Amides for Improving Lubricating Properties of Diesel Fuel)

  • 육정숙;김영운;유승현;정근우;김남균;임대재
    • 공업화학
    • /
    • 제23권4호
    • /
    • pp.421-427
    • /
    • 2012
  • 초저유황 경유의 윤활성능을 향상시킬 목적으로 식물유 기반 알칸올 아마이드 유도체를 합성하여 윤활성능을 평가하였다. 알칸올 아마이드 유도체는 폐식물유(다크오일), 팜유, 코코넛유를 메탄올과의 연속 전이에스테르화 반응을 통하여 합성한 지방산 메틸에스테르와 디에탄올아민(DEA)의 아마이드화 반응을 행하여 합성하였다. 합성한 알칸올 아마이드 유도체는 1 wt% 범위 내에서 초저유황 경유에 잘 용해되었으며, 이 유도체를 120 ppm 포함한 초저유황 경유의 윤활성능을 HFRR법으로 측정하였다. 그 결과, 초저유황 경유의 마모흔의 직경이 581 ${\mu}m$에서 아마이드 첨가 후 305~323 ${\mu}m$으로 현저히 작아져 초저유황 경유의 윤활성능을 향상하는 것으로 확인되었다. 한편, 식물유의 종류에 따른 마모흔의 차이는 크지 않아 알칸올 아마이드 유도체의 알킬기의 구조에 따른 윤활성능의 차이는 크게 나타나지 않았다. 알칸올 아마이드 한 종류를 선정하여 첨가 농도에 따른 윤활성능을 평가한 결과, 농도에 따라 마모흔의 직경이 현저히 작아지는 결과를 얻었는데 이는 윤활성능이 첨가 농도에 따라 향상되는 것을 의미한다.