• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.52 no.6
• /
• pp.702-708
• /
• 2019

The range resolution of echo sounders can be improved by enhancing the transducer bandwidth. We designed a bandpass matching network for expanding the bandwidth of a transducer by scaling in both impedance and frequency after transforming a lowpass network into a bandpass configuration for a third-order Bessel filter. We measured the effect of the Bessel matching network for a 50 kHz sandwich type transducer on the transmitting voltage response (TVR), receiving sensitivity (SRT) and figure of merit (FOM), using a chirp echo sounder system. Both the simulation and experimental results indicated that the transducer with a bandpass matching network was capable of producing a symmetrical acoustic output over a wider bandwidth (8.25 kHz) than was the transducer without a matching network (3.75 kHz). By implementing the Bessel matching network, we achieved a 120% bandwidth enhancement.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.9
• /
• pp.547-553
• /
• 2003

In this paper, we designed the PC-based analyzer of the power spectral density that could estimate the heart rate variability from time series data of R-R interval. The power spectral density estimated that it applied the autoregressive model to the measured electrocardiogram during a short period. Also, the characteristics of the designed analyzer are that it could process of the signal filtering, the generation and recomposition of time series and the feature extraction at the same time. Especially the analyzer reconstructed which applied the lowpass filter of the time series composed by the linear interpolation so as to enhance the signal-to-noise feature. We could estimate the power spectral density that confirmed a variety of power peak with low frequency range and high frequency rang of autonomic nerve by the heart rate variability.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.8
• /
• pp.60-67
• /
• 1996

In this paper, we propose a new temporal interpolation method based on spatial filtering. Compared with the conventional method, the proposed one may use a few adjacent frames and apply temporal lowpass filtering. To develop this method, we follow the basic approach of sampling rate conversion. Additionally, we use some assumption of video sequence : moving object has constant velocity rigid translational motion. From them, spatial filtering for temporal sampling rate conversion is described. This method has a lot of noise immunity on a motion vector and doesn't make a great difference from the original frame. The interpolated frame shows moderate change even there is a great time difference. This method has exactly same description of motion adaptive spatial filter which has an efficient temporal band-limiting characteristics. It imposes the possibility to make video sequence with good pictural quality.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.5
• /
• pp.1-8
• /
• 2001

A measuring system is developed to acquire static image from rotary state through CCD camera in back light illumination by synchronizing chopper to workpiece. In image processing of acquired image, lowpass filter is very useful in view of noise removal, and optimum binary image can be made through histogram equalization which is one of the histogram technique to maximize brightness intensity between workpiece and background. After image treatment applying Laplacian operator, surface roughness is calculated by introducing conversion coefficient of pixel which edge is composed of.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.1
• /
• pp.31-34
• /
• 2006

A simple robust fundamental frequency estimator on the time-frequency domain is proposed. Combined with the appropriately designed low-pass filter, the instantaneous frequency estimator based on the Teager-Kaiser energy function can detect the fundamental frequency of speech signal. The Teager-Kaiser function can be obtained through real computation and show the change of frequency as time goes. And when a speech block with N samples is processed with a lowpass fille. with length of L, it requires $O(N{\cdot}(L+5))operations,$ compared to $O(N{\cdot}2log_2N+L))operations$ in the recently introduced wavelet and conventional instantaneous frequency method. The computer simulation confirms the usefulness of the proposed fundamental frequency estimation method.

• 한국ITS학회:학술대회논문집
• /
• 2004.11a
• /
• pp.224-227
• /
• 2004

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.6
• /
• pp.944-949
• /
• 1986

By improving the ability of arithmatic processing with an arithmatic processor in a microcomputer and realizing the data input system for real time analysis, an FFT analyzer that is usable within the range of audio frequency is designed and constructed. The input signal passes through a gain programmable pre-amplifier and anti-aliasing lowpass filter into an analogditital converter to be converted into digital form. The converted input data is processed by an Apple II microcomputer. The results of the processing are displayed using a microcomputer display unit and can be copied on a printer or stored in a floppy disk.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.169-179
• /
• 1999

In this paper, a GaAs MESFET single-ended resistive mixer with high linearity and isolation is designed. The bias voltage of this mixer is applied only gate of GaAs MESFET to use the channel resistance. The LO is applied the gate and the RF is applied the drain through 7-pole hairpin bandpass filter to obtain the proper isolation thru LO-RF. The IF is extracted from the source with short circuit and lowpass filter. Using extracted equivalent circuits for LO and RF, conversion loss is calculated and compared with result of harmonic balance analysis. Measured conversion loss of this S-band down converter mixer is 8.2~10.5dB by considering the measured 3.0~3.4dB RF 7-pole hairpin bandpass filter loss and IP3in is 26.5dBm at Vg=-0.85~-1.0V in distortion performance.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.9
• /
• pp.64-72
• /
• 1998

In this paper, the design of a current integrator for low-voltage, low-power, and high frequency applications using complementary high swing cascode current-mirror is presented. The proposed integrator decreases output current errors due to non-zero input resistance and non-infinite output resistance of the simple current integrator. As a design example, the 3rd order Butterworth lowpass filter is designed by a leapfrog method. Also, we apply the predistortion design method to reduce the magnitude distortion which occurs at a cutoff frequency by the undesirable phase shift of a lossless current integrator. The designed current-mode filter is simulated and examined by SPICE using 0.8$\mu\textrm{m}$ CMOS n-well process parameters. The simulation results show 20MHz cutoff frequency and 615㎼ power dissipation with a 2V power supply. And the cutoff frequency of the filters can be easily changed by the DC bias current.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.4
• /
• pp.1068-1076
• /
• 1996

In this paper, a new continuous-time current-mode integrator as basic building block of the low-voltage analyog current-mode active filters is proposed. Compared to the current-mode integrator which is proposed by Zele, the proposed current-mode integrator had higher unity gain frequency and output impedance in addition to lower power dissipation. And also, a current-mode third-order lowpass active filter is designed with the proposed current-mode integrator. The designed circuits are fabricated using the ORBIT's $1.2{\mu}{\textrm{m}}$ deouble-poly double-metal CMOS n-well process. The experimental results show that the filter has -3dB cutoff frequency at 44.5MHz and 3mW power dissipation with single 3.3V power supply and also $0.12mm^{2}$ chip area.