• The Research Journal of the Costume Culture
• /
• v.8 no.5
• /
• pp.668-680
• /
• 2000

The study presents the general types and individual differences of the shape of the adult women's neck and shoulder in our country. It is based on the average value, the standard deviation, the maximum value, the standard deviation, the maximum value, the minimum value and c.v. measured from the women at the age of 19 through 64. The results of this study are as follows ; 1. The factors by factor analysis are five. The first is the size factors of the neck and shoulder. The second is shape factor of neck. The third is plane view and length factor of the neck. The fourth is the side view factor of the neck and shoulder. The fifth is the shape factor of shoulder. Therefore the shape of the neck and shoulder should be examined in the shape factors as well as in the size factors as well as in the size factors for the designing body-suitable clothes. 2. The factors of the concrete objects are the solid view of neck and shoulder, the cross-sectional view of neck line, side view of neck and shoulder and length of neck. The explainable measuring items for the factors are the difference of the length between lower neck round line and the 4㎝ above neck round line, the length of neck, the angle of inclination between fore neck and back neck, the angle of inclination of the side shoulder, the difference of the height between fore neck point and back neck point, the width of shoulder, the width of chest and the width of back. 3. The concrete objects of the neck and shoulder have five types ; Type Ⅰ is average type, Type Ⅱ is thick short neck and the drooping shoulder type, Type Ⅲ I is slender long neck and lean-back shoulder type, Type Ⅳ is thick and rising shoulder type and Type Ⅴ is slender and drooping shoulder type.

• Journal of Fashion Business
• /
• v.20 no.4
• /
• pp.189-206
• /
• 2016

A breast model was for the human body was devised by studying a body scan and human body index of a desirable breast type. Thus, when manufacturing various 3D models, these results can accordingly become a fundamental basis for realizing a desirable breast model. This study aims to provide a basic data for designing the cup patterns of brassieres in order to improve the function and wearing comfort. The comfort of three kinds of brassieres were compared: one manufactured by the actual measured size; another manufactured as per the ratio of desirable upper and lower breast lengths; and the third manufactured by the 3D model attained by the desirable human body ratio. In this study, we suggest a process for realizing the desirable breast model using the ratio of bust breadth and waist front length, which are the components for deciding the appropriate position and size of breast, and which are easy to measure. The ideal breast shape is an equilateral triangle formed by connecting the nipple with the center of the clavicle. After deciding the interval between the nipples, this value can be used to configure the locations of nipples by drawing a tangent, with equal length, from the anterior neck point (which is the center of clavicle) to the nipple. Also, since inside points of breast do not exist, the outer point of breast, upper point of breast, and below point of breast on the same plane, and the depths from the nipple point to the respective points, are applied to simulate a 3D image, by modifications along the x, y, and z axes. Depending on the type of breast, the length from the center of shoulder to the nipple, the diameter of breast, upper length of breast, and the position of nipple, are different. In conical or protruding breast, the wearing sensation is better when the nipple point of brassiere was lifted, by modifying the upper and lower lengths of breast. Considering the wearing sensation and function of a brassiere, it was better to leave the wearer's size as it is and use a pad within the same cup, rather than increase the basal area of the breast in order to increase the volume.

• Journal of Fashion Business
• /
• v.21 no.4
• /
• pp.21-33
• /
• 2017

This study analyzed the attitude and effect of middle-age women on wearing girdles. Through this examination, we investigated types of girdles worn by middle-age women and compared and analyzed characteristics among types. By identifying middle-age women's need to wear girdles, this study enables effective development of girdles for middle-age women. Middle-age women's types of wearing girdles were analyzed according to three types of women wearing girdles: hate type, wearing preference type and inconvenience acceptance type. The hate type woman is frustrated with wearing a girdle because it impedes blood circulation, digestion, and causes fatigue. The wearing preference type woman wears a girdle to feel psychological satisfaction and self-confidence and thinks that wearing a girdle pushes the abdomen and supports the hip (hip-up effect). Women strongly agreed that body shape is made beautiful and the silhouette of the lower body is made beautiful by wearing a girdle. The inconvenience acceptance type of woman thinks it is inconvenient to wear a girdle, but nevertheless is satisfied with wearing a girdle. Based on findings of this study, development of girdles considering body shapes of middle-age women, development of soft materials and improvements facilitating dressing methods are needed.

• Fashion & Textile Research Journal
• /
• v.20 no.6
• /
• pp.744-751
• /
• 2018

This study aimed to provide the information on the thermal sensation and the amount of clothing worn of junior high school students in winter classroom the relation with their climate adaptability. Total usable questionnaires were obtained from 467 male and female students. The questionnaire included general characteristics, physical characteristics, self awareness of body shape, climate adaptability and subjective thermal sensation in winter classroom. The data were analyzed using SPSS Statistics 18.0 for frequency analysis, factor analysis, chi-square analysis, t-test and correlation analysis. The results were as follows. The average body type based on BMI was normal($20.1kg/m^2$ ). Females perceived their body type as thinner than males. They wore more (8.67 garment items compared to 8.14 for males). Only about 25% of students voted the thermal sensation to neutral(47% cool~very cold, 28% warm~very hot). Females were more sensitive to the cold, perceived less healthy, and wore more garments in the cold. Students felt colder in winter classroom when their cold adaptability was lower and they actively adjusted thermal insulation against the cold. It is recommended to suggest the guidelines for the proper indoor temperature and for the wear behavior in classroom in the perspectives of increasing the learning efficiency and improving the students' climate adaptability.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.1
• /
• pp.63-76
• /
• 2015

This study conducted a survey to gauge the buying and wearing propensities of wearers of leg guards made for baseball catchers, as well as product characteristics of preferred leg guards. Data from the survey were analyzed to obtain basic data for the development of an advanced leg guard design. Degree of compression, horizontal distance, cross section view and outline 3D sketch were also analyzed from the 3D data of leg guards; in addition, mobility and kinematic analysis were conducted through a wearing test. The survey indicated that imported products dominate the current retail market because they are appreciated by customers in terms of fit, price, brand, and protection. Representative complaints of products were discomfort, pressure, and the heavy-weight of the leg guards in general attributed to overall structure and 3D shape. When the pressure was lower on the front area of knee, it feels better to wear and the average knee angular velocity during the up and down motion increased, which suggests a better design from a kinematic point of view. The knee is the primary part of the body responsible for any movement of the lower limbs; consequently, the degree of compression and support stability of the leg guards near the knee area are important factors to evaluate the performance of leg guards. The results of our study indicate significant opportunities for improvement in product design and the development of baseball leg guards along with an ergonomic design that considers the mobility of the knee, skin deformations is necessary to improve performance. The process followed in this study will be applicable to studies on other personal protective equipment for sports.

• Journal of architectural history
• /
• v.31 no.6
• /
• pp.59-68
• /
• 2022

This paper is an architectural historical study on Chimi of Hwangnyongsa Temple. In this research, the shape and cross-section of the chimi are reviewed. The results of the study are as follows. The chimi is a form in which the head part facing the maru is omitted, and the upper and lower body are separated. The upper and lower bonds are assembled into a two types of joint throughout the side of the torso, and then bound with an iron strap. Because of the absence of ridge line in the front, and the narrow curved surface which makes the side plate close to the plane, the entire cross-section is triangular, and the rear plate maintains the shape of the chimi. The naerimmaru connected to the side of the chimi has a slope, so it is clear that the chimi was used on the woojingak-jibung(hipped-roof), and the wing part and back of the chimi are erected on the side roof. The height of the yongmaru and chunyeomaru is about the same and the roofing tiles of those are in contact. The roofing tiles of chunyemaru should be cut to fit the angle of the contacting part. The maru is 30 stories high of roofing tiles as a result of the on-board survey. Based on reference on the shape and timing of the production of chimi, the height of chimi, and the maru is believed to have been built before the Unified Silla Period and used in buildings with at least seven-kan frontage. Buildings corresponding to these construction conditions can be seen as Central hall and East hall in Hwangnyongsa temple.

• The Research Journal of the Costume Culture
• /
• v.7 no.2
• /
• pp.275-288
• /
• 1999

The purpose of this is providing a simple, relatively errorless body surface area calculation. Subjects were 10 married women and 10 singles women whose age was 20 to 29 years old. The Gypsum method has applied for the sampling of body surface. The Weight method has been used to measure body surface by means of transferring gypsum shape on uniform plane polypropylene films. In this study, compare analyzed errors between the traditional formulas for measuring body surface area and measuring data in this experiment. More than all, it has been to induce a regression equation for measuring body surface area, which is so simple to calculate with less errors, with variable factors as weight and height. The results of this experiment as follows : 1. In the traditional formulas, weight formula was shown high average error : Niya\`s height formula. which was modified K value as 0.62 in the height formula (S = KH) is shown lower average error than Lassabliere\`s Height formula. 2. In the weight-height formula (S=K √WH), it was shown high average error according to the increasing of K value. Kawanami\`s formula, which 5.378 as K value, was shown low average error both the singles and the married women. 3. Dubois weight-heingt formula (S=W/sup a/·H/sub b/·K) was shown low average error than the weight, height, weight-height (S=K√WH) formula. 4. The regression equations with variable factors as weight and height are 156.74W + 86.05H - 660.25 (Single women) and 136.02W + 90.57H - 6241.32 (Married women) the average error and absolute average error to the singles are 0.09%, 0.94% and resoectively -0.13%, 1.16% for the married women.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.9
• /
• pp.1039-1048
• /
• 2011

This research develops a basic design structure for scuba diving wetsuits suitable for the shape of Korean men in their 30's as well as enhances the reduction rate for underwater activity. The clothing pressure and fitness tests were performed using four different types of body suits. The usable data of the tests were coded for further statistical analysis that includes one way-ANOVA test and S-N-K Multiple Range Test by using SPSSWIN 17.0. An analysis of the results shows: (1) The results of the clothing pressure test (using a dummy) indicated that the larger the reduction rate, the stronger the clothing pressure gets (with an exception on the knee area). It has great impact on clothing pressure with regards to the different body parts. The different reduction rates should be applied to body parts accordingly. (2) In the case of test subjects, the overall mean values of the clothing pressure were lower than the ones with the dummy (attributable to the cushion function of body skin and muscle as well as the high stretch of the fabric). (3) In evaluating the subjective fit test of four types of body suits, a statistically significant difference was found in the relation between pattern reduction rates and all parts of the body. It was revealed that the reduction rate of 'B' pattern (X: 4%, Y: 3%) was the most suitable pattern and the 'B' pattern scored highest in the motion functional fit test performed by a test subject.

• Korean Journal of Community Nutrition
• /
• v.12 no.3
• /
• pp.247-258
• /
• 2007

This study was conducted to investigate weight control status and associated factors among health-related major female college students. The subjects consisted of 41 nutrition and 78 physical exercise major female college students. Nutrient intakes, biochemical index, nutrition knowledge (recognition and accuracy), interest of weight control, body satisfaction, self-recognition of health condition, self-evaluated body weight were studied. About 73% of nutrition and 79% of physical exercise major female students were in the normal range of BMI ($18.5{\sim}23$) and 2% of nutrition and 1% of physical exercise major female students were underweight, 10% of nutrition and 6% of physical exercise major female students were obese. There were no significant differences in height and weight by major but %body fat and WHR in physical exercise majors were significantly lower than nutrition major students (respectively p<0.01, p<0.05). Overall, nutrition intakes of subjects were not shown to be appropriate, especially Ca/P of subjects was shown $0.54{\sim}0.64$, fat% out of energy of subjects was shown $24.7{\sim}29.0$ and Na intake was shown above 2000mg. Recognition and accuracy of nutrition were higher than those of physical exercise majors (p<0.001). There were no significant differences in self-recognition of health condition, self-evaluated body weight, satisfaction of body shape by major and weight control attempt. But interest of weight control of attempter was higher than that of no-attempter in nutrition (p<0.05) and physical exercise major students (p<0.01). Significantly negative correlation was found in satisfaction of body and BMI, body fat mass, %bodyfat, WHR. And significantly positive correlation was found in interest of weight control and BMI, %bodyfat, WHR. It was noticeable to see that interest of weight control was positively correlated to accuracy and accuracy was negatively correlated to blood cholesterol level. Therefore, proper nutrition education for female college students is needed in order to improve their weight control-related health.

• Journal of the Korean Society of Costume
• /
• v.18
• /
• pp.373-381
• /
• 1992

Woman in Choson era had various kind of accdssories like rings, ear ring, ornamentak hairpins and so on. Among them their favorite was the Norigae, the pendent trinket. With the embroidered ornament at its center, beads and knots were attached to the upper and lower part, and it was hung with a tassel. It was carried on the string of the Chogori. norigae oreginated in waist string of Three Countries era(Sills, Paekje and Koguryo) ; had been changed with the development of fashion, embroidery and the influence of Buddhistic culture. The differences between Embroidered Norigae and Norigae are following. If the ornament at its center is made of such jewels as gold, silver, jade and the like, it is called Norigae. But if the ornament at its center is made of the embroidered Norigae. Such a Embroidered Norigae in which perfume was contained, was as a perfume box or a perfume bag and was carried on the strings of Chogori by Danjak(single work). The Differences between ancient Embroidered Norigae of late Choson era and modern Embroidered Norigae are Following; 1) The type of main body-the embroidered ornament at its center was mainly embroidered with the shape of animals in both of ancient Embroidered Norigae was usually formes like a bat and that of modern Embroidered Norigae like butterfly. 2) plants were adapted as the main design of ancient Embroidered Norigae, but plants and animals as that of modern Embroidered Norigae. 3) The colors of the background and the design are usually red in both ancient and modern Embroidered norigae. 4) The tassels of ancient Embroidered Norigae were mode in the shape of srick and a strawberry. but the tassels of modern Embroidered Norigae were mainly made in the shape of a stick. 5) Nowadays the beauty of external form is considered more important while the symbol of main body was considered more important in Choson era. 6) The role of Thidon in the composition of Embroidered Norigae is declined and a lot of main bodies are used in modern Embroidered Norigae. 7) Modern Korean people are apt to choose Embroidered Norigae depending upon the design of main body and the traditional Korean beauty. 8) Modern people who desire to get new thing, try to make the design of main body various. As their cognition of Korean tradition is of the increase, the restoration of ancient Embroidered Norigae to its original form has been accom