• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.5
• /
• pp.499-509
• /
• 2019

This paper discusses energy use monitoring and analysis as part of a study on a low-cost energy supply management system that links an existing database with weather information with no real-time monitor for energy demand of buildings using renewable energy, generator and energy storage systems. This study is targeted at small and medium-sized buildings and aims to monitor energy use with a small number of sensors at low cost by applying an energy management system (EMS). The present study can help overcome the limitations of high-cost EMS applied to large commercial and public buildings. We developed current, indoor temperature and human motion sensors and installed them in an office of a company in a sample building. Through these sensors, we analyzed energy use patterns and the effects of weather information and human motion on the energy use. Furthermore, we analyzed the correlations between the total KEPCO energy use of the sample building and weather by comparing these two data. The results showed that the office energy use of a company was more affected by human motions than by weather information. The comparison between the total energy use of the Building and weather information found that external temperature had an effect on the energy use.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.23
• /
• pp.10057-10059
• /
• 2015

Positron emission tomography (PET) as the functional component of current hybrid imaging (like PET/CT or PET/MRI) seems to dominate the horizon of medical imaging in coming decades. $^{18}$Flourodeoxyglucose ($^{18}FDG$) is the most commonly used probe in oncology and also in cardiology and neurology around the globe. However, the major capital cost and exorbitant running expenditure of low to medium energy cyclotrons (about 20 MeV) and radiochemistry units are the seminal reasons of low number of cyclotrons but mushroom growth pattern of PET scanners. This fact and longer half-life of $^{18}F$ (110 minutes) have paved the path of a centralized model in which $^{18}FDG$ is produced by commercial PET radiopharmacies and the finished product (multi-dose vial with tungsten shielding) is dispensed to customers having only PET scanners. This indeed reduced the cost but has limitations of dependence upon timely arrival of daily shipments as delay caused by any reason results in cancellation or rescheduling of the PET procedures. In recent years, industry and academia have taken a step forward by producing low energy, table top cyclotrons with compact and automated radiochemistry units (Lab-on-Chip). This decentralized strategy enables the users to produce on-demand doses of PET probe themselves at reasonably low cost using an automated and user-friendly technology. This technological development would indeed provide a real impetus to the availability of complete set up of PET based molecular imaging at an affordable cost to the developing countries.

• The Journal of Fisheries Business Administration
• /
• v.45 no.1
• /
• pp.95-107
• /
• 2014

This study is aimed to analyze the economic performance of black rockfish aquaculture by standardizing cost structures by region and farming size. The result of survey on farming and sale condition in each region, stocking density, survival rate, juvenile price, and unit production was the highest at Yeosu and Tongyeong, Heuksando showed the lowest. While rearing period was the longest at Tongyeong, the shortest region was Yeosu and Wando. In farming cost structure by region, amount of feeing was the highest at Tongyeong and Yeosu, and the lowest was Heuksando. Cost of medicine was high in Wando and Taean region, Yeosu and Hecksando was low. In case of farm size, feed cost ratio was high in the order of medium(0.75ha), small(0.25ha) and large(1.25ha) size. Standard production cost at every farm size of Heuksando showed the lowest among these regions. Taean and Yeosu was middle, and Tongyeong and Wando was the highest. According to the income, profit rate and investment return of farm size in all regions, as the bigger farm size, the higher income and profit rate was revealed. However, in case of Wando, Taean, and Heuksando which regions has high investment return, medium farm size was higher than large size. The result of economic analysis according to various factors, economic feasibility of black rockfish aquaculture in marine floating cage was showed significant changes by rearing and market condition.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.505-507
• /
• 2008

A conventional active-clamp forward (ACF) converter is a favorable candidate in low-to-medium power applications. However, the switches suffer from high voltage stress, i.e., sum of the input voltage and the reset capacitor voltage. Therefore, it is not suitable for high input voltage applications such as a front-end converter of which the input voltage is about 400-$V_{dc}$. To solve this problem, three-switch ACF (TS-ACF) converter, which employs two main switches and one auxiliary switch with low voltage stress, is proposed. Utilizing low-voltage rated switches, the proposed converter is promising for high input voltage applications with high efficiency and low cost.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.12
• /
• pp.1982-1992
• /
• 2019

The alkaliphilic, calcium carbonate precipitating Bacillus sp. strain AK13 can be utilized in concrete for self-repairing. A statistical experimental design was used to develop an economical medium for its mass cultivation and sporulation. Two types of screening experiment were first conducted to identify substrates that promote the growth of the AK13 strain: the first followed a one-factor-at-a-time factorial design and the second a two-level full factorial design. Based on these screening experiments, barley malt powder and mixed grain powder were identified as the substrates that most effectively promoted the growth of the AK13 strain from a range of 21 agricultural products and by-products. A quadratic statistical model was then constructed using a central composite design and the concentration of the two substrates was optimized. The estimated growth and sporulation of Bacillus sp. strain AK13 in the proposed medium were 3.08 ± 0.38 × 10⁸ and 1.25 ± 0.12 × 10⁸ CFU/ml, respectively, which meant that the proposed low-cost medium was approximately 45 times more effective than the commercial medium in terms of the number of cultivatable bacteria per unit price. The spores were then powdered via a spray-drying process to produce a spore powder with a spore count of 2.0 ± 0.7 × 10⁹ CFU/g. The AK13 spore powder was mixed with cement paste, yeast extract, calcium lactate, and water. The yeast extract and calcium lactate generated the highest CFU/ml for AK13 at a 0.4:0.4 ratio compared to 0.4:0.25 (the original ratio of the B4 medium) and 0.4:0.8. Twenty-eight days after the spores were mixed into the mortar, the number of vegetative cells and spores of the AK13 strain had reached 10⁶ CFU/g within the mortar. Cracks in the mortar under 0.29 mm were healed in 14 days. Calcium carbonate precipitation was observed on the crack surface. The mortar containing the spore powder was thus concluded to be effective in terms of healing micro-cracks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.920-927
• /
• 1994

A development of an efficient 14.0~14.5GHz 3 Watt SSPA is described in this paper, which is applicable to the very small aperture terminal(VSAT) for bidirectional data and voice signal transmission in low cost and with small size. The SSPA consists of two stages of low noise amplifiers using the low noise GaAs FETs. two stages of medium power amplifiers using the medium power GaAs FETs, and three stages of power amplifiers including a balanced amplifier using an internally matched power GaAs FET. The achieved with this seven stage amplifiers are 42dB signal power gain, 7dB noise figure, 35dBm output power at 1dB gain compression point and 2.0 and 1.5 input and output VSWR respectively.

• Journal of Korean Society on Water Environment
• /
• v.36 no.4
• /
• pp.275-283
• /
• 2020

Fecal coliforms are indicator bacteria to evaluate fecal contamination and microbiological safety in environment water. To examine fecal coliforms by membrane filtration, 1% rosolic acid solution dissolved in sodium hydroxide(0.2 M) should be added to m-FC medium according to Korean standard method. To reduce the exposure of researchers to harmful chemicals and expenditure of unnecessary cost, we evaluated if the rosolic acid solution is required to detect fecal coliforms. For 113 samples collected from five intake sources of Seoul, 42 samples of six tributaries, and 11 samples of sewage, the number of fecal coliforms was compared in medium with or without the reagent. As a result, the number was higher in m-FC medium without the reagent, but there was not a statistically significant difference. In the water intake, m-FC medium without the reagent could be used to examine fecal coliforms except in July, August and in case of rainfall. When heterotrophic plate counts exceeded 1,000 CFU/filter, or during rainfall, there was an effect of background bacteria in two types of the medium. However, it was more appropriate to use m-FC medium with the reagent to suppress gram-positive bacteria that can grow on medium without the reagent. In the tributary and sewage samples, the effect of the background bacteria was low, allowing the use of medium without the reagent regardless rainfall. Thus, it is necessary to present in standard method that the addition of rosolic acid solution in m-FC medium can be selected according to the characteristics of samples.

• Journal of agriculture & life science
• /
• v.44 no.3
• /
• pp.7-14
• /
• 2010

Alternative subirrigation way, capillary wick system (CWS) was tested to reduce labor cost, waste water, contamination of ground water, and use of fungicide compared to overhead irrigation system (OIS). CWS helped reduce remarkably the working hours for watering from 4 hours in OSI to just 5 minutes. Labor cost was saved 98% in CWS compared to OIS. By the physical characteristics of various growing media, 1 coconut coir+2 perlite (v/v) mixture was selected because it had an ideal distribution of three phase, e.g. 1 solid: 1 liquid: 2 gas phase. Medium mixture containing scoria had so high bulk and particle density to hurt root. In bark-containing medium, the liquid phase and the percent saturation of liquid phase with time elapsed was lower than that of other mixture. It meant that the mixture contained very low level of water. Application of CWS for cyclamen pot production played an important role in reducing the incident of fusarium wilt symptom from 18% in conventional over watering system to 4%. Cyclamen pot irrigated by capillary wick had shorter petiole and more leaves than those by overhead watering. As a result, this system was highly beneficial to get uniform pot products with high quality. It improved water and nutrient solution efficiency relative to conventional overhead irrigation system (OIS).

• Journal of Astronomy and Space Sciences
• /
• v.22 no.1
• /
• pp.35-46
• /
• 2005

This paper addresses the design and analysis results of a 2-axes magnetometer for attitude determination of small satellite. A low-cost and efficient 2-axes fluxgate magnetometer was selected as the most suitable attitude sensor for LEO microsatellites which require a low-to-medium level pointing accuracy. An optimization trade-off study has been performed for the development of 2-axes fluxgate magnetometer. All the relevant parameters such as permeability, demagnetization factor, coil diameter, core thickness, and number of coil turns were considered for the sizing of a small satellite magnetometer. The magnetometer which is designed, manufactured, and tested in-house as described in this paper satisfies linearity requirement for determining attitude position of small satellites. On the basis of magnetometer which is designed in Space System Research Lab. (SSRL), commercial magnetometer will be developed.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.11
• /
• pp.953-960
• /
• 2015

The thermoforming process has been widely used to manufacture medium- and large-sized plastic parts because of the relatively low cost and high productivity, as compared with other plastic forming processes. One of current salient issues of thermoforming industries is the reduction of trial and error during the production of the thermoformed product. Hence, there is a significant increasing interest in the thermoforming analysis by the thermoforming industries. The goal of this paper is to investigate a methodology of the three-dimensional thermoforming analysis for medium- and large-sized plastic parts. There is a discussion about methodologies of thermoforming analysis, as well as material modeling, and three-dimensional finite element analysis. Furthermore, there is an examination, through case studies, about the applicability of the proposed methodology concerning the thermoforming analysis.