Browse > Article
http://dx.doi.org/10.7736/KSPE.2015.32.11.953

Methodology of Three-Dimensional Thermoforming Analysis to Simulate Forming Process of Medium and Large-Sized Plastic Parts  

Lee, Ho Jin (Department of Mechanical Engineering, Graduate School, Chosun University)
Ahn, Dong Gyu (Department of Mechanical Engineering, Chosun University)
Publication Information
Journal of the Korean Society for Precision Engineering / v.32, no.11, 2015 , pp. 953-960 More about this Journal
Abstract
The thermoforming process has been widely used to manufacture medium- and large-sized plastic parts because of the relatively low cost and high productivity, as compared with other plastic forming processes. One of current salient issues of thermoforming industries is the reduction of trial and error during the production of the thermoformed product. Hence, there is a significant increasing interest in the thermoforming analysis by the thermoforming industries. The goal of this paper is to investigate a methodology of the three-dimensional thermoforming analysis for medium- and large-sized plastic parts. There is a discussion about methodologies of thermoforming analysis, as well as material modeling, and three-dimensional finite element analysis. Furthermore, there is an examination, through case studies, about the applicability of the proposed methodology concerning the thermoforming analysis.
Keywords
Methodology of thermoforming analysis; Material modeling; Finite element method; Medium and large sized plastic part; Case study;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Mark, J. E., "Polymer Data Handbook," Oxford University Press, 1999.
2 Throne, J. L., "Technology of Thermoforming," Hanser Publisher, 1996.
3 Chen, S.-C., Huang, S.-T., Lin, M.-C., and Chien, R.-D., "Study on the Thermoforming of PC Films used for in-Mold Decoration," International Communications in Heat and Mass Transfer, Vol. 35, No. 8, pp. 967-973, 2008.   DOI
4 Warby, M., Whiteman, J., Jiang, W.-G., Warwick, P., and Wright, T., "Finite Element Simulation of Thermoforming Processes for Polymer Sheets," Mathematics and Computers in Simulation, Vol. 61, No. 3, pp. 209-218, 2003.   DOI
5 Wiesche, S., "Industrial Thermoforming Simulation of Automotive Fuel Tanks," Applied Thermal Engineering, Vol. 24, No. 16, pp. 2391-2409, 2004.   DOI
6 Ahn, D.-G., Cho, C.-G., Jeong, S.-H., and Lee, D.-G., "Design of Photobioreactor for Mass Production of Microalgae," J. Korean Soc. Precis. Eng., Vol. 28, No. 2, pp. 140-153, 2011.
7 Ahn, D. G., Ahn, Y. S., and Jung, S. H., "A Study on the Development of a Thin Flat Panel Photo- Bioreactor Case," J. Korean Soc. Precis. Eng., Vol. 29, No. 9, pp. 946-957, 2012.   DOI
8 ASTM No. D638-10, "Standard Test Method for Tensile Properties of Plastics," 2010.
9 Lee, H. J. and Ahn, D. G., "A Study on Tensile Behavior of Transparent Polycarbonate (PC) Plate in the High Temperature," J. Korean Soc. Precis. Eng., Vol. 31, No. 1, pp. 21-28, 2014.   DOI
10 G' sell, C., Aly-Helal, N. A., and Jonas, J. J., "Effect of Stress Triaxiality on Neck Propagation during the Tensile Stretching of Solid Polymers," Journal of Materials Science, Vol. 18, No. 6, pp. 1731-1742, 1983.   DOI
11 G'sell, C. and Jonas, J. J., "Determination of the Plastic Behavior of Solid Polymers at Constant True Strain Rate," Journal of Materials Science, Vol. 14, No. 3, pp. 583-591, 1979.   DOI
12 Kim, G., Lee, K., and Kang, S., "Prediction of the Film Thickness Distribution and Pattern Change during Film Insert Thermoforming," Polymer Engineering & Science, Vol. 49, No. 11, pp. 2195-2203, 2009.   DOI   ScienceOn
13 Ahn, D. G., Lee, H. J., Lee, S. H., Lee, S. B., and Ko, J. H, "Three-Dimensional Analysis of Vacuum-Assisted Thermoforming Process for the Medium and Large Sized Inner Case of Refrigerator," Proc. of the KSME Autumn Conference, p. 85, 2014.
14 Cook, R. D., Malkus, D. S., Plesha, M. E., and Witt, R. J., "Concepts and Applications of Finite Element Analysis" Wiley, 4th Ed., pp. 318-319, 2002.
15 Lee, H. J. and Ahn, D. G., "Manufacture of Large-Sized Flat Panel Airlift Photobioreactor (FPA PBR) Case with Characteristic Shape Using Thermoforming Process," Journal of Mechanical Science and Technology, 2015. (Accepted)