• Title/Summary/Keyword: low-cost carrier

Search Result 159, Processing Time 0.086 seconds

IMO 환경규제에 따른 저유황 연료유 사용이 국적 컨테이너 선사에 미치는 영향 (Effect of Low Sulphur Fuel Oil Use on Korean Container Shipping Companies by IMO Environmental Regulations)

  • 박성화;한철환;김태일
    • 한국항만경제학회지
    • /
    • 제36권1호
    • /
    • pp.23-40
    • /
    • 2020
  • 본 연구는 IMO 2020 시행에 따른 국내외 선사의 대응전략을 살펴보고, 선사의 주요 대응방안인 저유황유로 연료를 전환할 경우 국적선사가 부담해야 할 추가비용과 그것이 선사의 수익성에 미치는 영향을 시나리오별로 분석하였다. 분석결과, 저유황유 사용 시 국적선사는 상당한 추가 비용이 발생하게 되고 이로 인해 모든 시나리오에서 영업이익 적자를 기록하는 등 수익성이 악화될 것으로 분석되었다. 이러한 결과는 대화주 운임교섭력이 약한 근해선사의 경우 연료유 가격에 탄력적으로 적용할 수 있는 합리적인 BAF 설정 기준이 필요하며, 또한 정유사, 화주, 선사 간 상호협력을 통해 상생할 수 있는 방안을 모색할 필요가 있음을 시사한다.

High performance of inverted polymer solar cells

  • Lee, Hsin-Ying;Lee, Ching-Ting;Huang, Hung-Lin
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
    • /
    • pp.61.2-61.2
    • /
    • 2015
  • In the past decades, green energy, such as solar energy, wind power, hydropower, biomass energy, geothermal energy, and so on, has been widely investigated and developed to solve energy shortage. Recently, organic solar cells have attracted much attention, because they have many advantages, including low-cost, flexibility, light weight, and easy fabrication [1-3]. Organic solar cells are as a potential candidate of the next generation solar cells. In this abstract, to improve the power conversion efficiency and the stability, the inverted polymer solar cells with various structures were developed [4-6]. The novel cell structures included the P3HT:PCBM inverted polymer solar cells with AZO nanorods array, with pentacene-doped active layer, and with extra P3HT interfacial layer and PCBM interfacial layer. These three difference structures could respectively improve the performance of the P3HT:PCBM inverted polymer solar cells. For the inverted polymer solar cells with AZO nanorods array as the electronic transportation layer, by using the nanorod structure, the improvement of carrier collection and carrier extraction capabilities could be expected due to an increase in contact area between the nanorod array and the active layer. For the inverted polymer solar cells with pentacene-doped active layer, the hole-electron mobility in the active layer could be balanced by doping pentacene contents. The active layer with the balanced hole-electron mobility could reduce the carrier recombination in the active layers to enhance the photocurrent of the resulting inverted polymer solar cells. For the inverted polymer solar cells with extra P3HT and PCBM interfacial layers, the extra PCBM and P3HT interfacial layers could respectively improve the electron transport and hole transport. The extra PCBM interfacial layer served another function was that led more P3HT moving to the top side of the absorption layer, which reduced the non-continuous pathways of P3HT. It indicated that the recombination centers could be further reduced in the absorption layer. The extra P3HT interfacial layer could let the hole be more easily transported to the MoO3 hole transport layer. The high performance of the novel P3HT:PCBM inverted polymer solar cells with various structures were obtained.

  • PDF

전화선 통신 시스템의 전송특성 및 채널용량에 관한 연구 (A Study on the Transmission Characteristics and Channel Capacity of Telephone Line Communication System)

  • 노재성;장태화
    • 디지털콘텐츠학회 논문지
    • /
    • 제10권2호
    • /
    • pp.233-238
    • /
    • 2009
  • 디지털 통신 네트워크 기술의 발전에서 인터넷 기술과 스마트 홈 가전기기의 확산은 고속/고품질 홈 네트워크에 대한 필요성을 증가시키고 있다. 홈 네트워크에서 가전기기와 컴퓨팅 기기가 증가함에 따라 홈 네트워크의 데이터 트래픽은 증가할 것이 명백하다. 다양한 홈 네트워크 기기는 멀티미디어 콘텐츠를 얻기 위하여 인터넷 서버에 접속하길 원한다. 따라서 본 논문에서는 가정내에서 이더넷이나 유무선 기술을 사용하기 위해 네트워크에 연결된 디지털 가전기기를 위한 TLC(Telephone Line Carrier) 시스템을 소개한다. 미래의 홈 네트워크 환경에서 TLC 기반의 스마트 홈 네트워크의 주된 목적은 저가격, 쉬운 설치, 고성능, 넓은 영역을 만드는 것이다. 본 논문에서는 스마트 홈 네트워크를 위한 전화선로 통신시스템의 채널용량을 송신전력, OFDM 반송파의 수, 채널손실, 잡음손실에 따라서 정량적으로 비교, 분석하였다.

  • PDF

Characterization of Sol-Gel Derived Antimony-doped Tin Oxide Thin Films for Transparent Conductive Oxide Application

  • Woo, Dong-Chan;Koo, Chang-Young;Ma, Hong-Chan;Lee, Hee-Young
    • Transactions on Electrical and Electronic Materials
    • /
    • 제13권5호
    • /
    • pp.241-244
    • /
    • 2012
  • Antimony doped tin oxide (ATO) thin films on glass substrate were prepared by the chemical solution deposition (CSD) method, using sol-gel solution synthesized by non-alkoxide precursors and the sol-gel route. The crystallinity and electrical properties of ATO thin films were investigated as a function of the annealing condition (both annealing environments and temperatures), and antimony (Sb) doping concentration. Electrical resistivity, carrier concentration, Hall mobility and optical transmittance of ATO thin films were improved by Sb doping up to 5~8 mol% and annealing in a low vacuum atmosphere, compared to the undoped tin oxide counterpart. 5 mol% Sb doped ATO film annealed at $550^{\circ}C$ in a low vacuum atmosphere showed the highest electrical properties, with electrical resistivity of about $8{\sim}10{\times}10^{-3}{\Omega}{\cdot}cm$, and optical transmittance of ~85% in the visible range. Our research demonstrates the feasibility of low-cost solution-processed transparent conductive oxide thin films, by controlling the appropriate doping concentration and annealing conditions.

고속 WPAN에서 Hybrid MAC을 이용한 성능 향상 (A Study on Performance Improvement of High- Rate WPAN using Hybrid MAC)

  • 박성현;이승형
    • 인터넷정보학회논문지
    • /
    • 제10권4호
    • /
    • pp.213-222
    • /
    • 2009
  • IEEE 802.15.3 HR-PAN은 PHY와 MAC으로 구성되어 있다. 그 중 MAC 기술은 부족한 채널 자원을 관리하는 중요한 역할을 한다. 기존 IEEE 802.15.3의 MAC 프로토콜에서 각 DEV에게 채널을 할당하는 방법은 네트워크의 상태나 주위 환경과 무관하게 고정된 형태이다. 이 논문에서 제안한 Hybrid MAC 프로토콜은 IEEE 802.15.3 HR-WPAN 환경에서 네트워크의 상태에 따라 TDMA 방식과 CSMA 방식을 유동적으로 사용할 수 있게 된다. 이 논문에서는 TDMA의 장점인 충돌 없는 전송시간의 보장과 CSMA의 장점인 높은 채널 사용률을 결합하여 802.15.3의 standard MAC보다 보다 높은 전송률을 보이는 Hybrid MAC을 제안한다.

  • PDF

새로운 구조의 저 위상잡음 유전체 공진 병렬 궤환 발진기 (The Design of New Phase Noise Dielectric Resonator Parallel Feedback Oscillator)

  • 전광일;박진우
    • 한국통신학회논문지
    • /
    • 제24권7A호
    • /
    • pp.947-954
    • /
    • 1999
  • 본 논문에서는 저렴하고 성능이 우수하면서 간단한 구조를 갖는 새로운 저 위상잡음 유전체 공진 병렬 궤환 발진기가 제안된다. 제안된 유전체 공진 병렬 궤환 발진기는 저잡음 증폭기, 전력증폭기, 전력 감쇠기, 전력 분배기, 그리고 두 개의 마이크로스트립 선로와 결합된 유전체 공진기로 이루어지는 병렬 유전체 공진 궤환 요소로 구성된 궤환 루프 발진기 구조를 가지고 있다. 유전체 공진 병렬 궤환 발진기의 측정된 위상잡음은 캐리어 주파수 10.75 GHz, 오프셋 주파수 1kHz에서 81dBc/Hz 보다 작게 나타났으며, 온도에 따른 주파수 안정도는 주변온도 -4$0^{\circ}C$에서 6$0^{\circ}C$까지 +/- 200kHz를 나타내었다.

  • PDF

Buried Channel 4단자 Poly-Si TFTs 제작 (The Fabrication of Four-Terminal Poly-Si TFTs with Buried Channel)

  • 정상훈;박철민;유준석;최형배;한민구
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제48권12호
    • /
    • pp.761-767
    • /
    • 1999
  • Poly-Si TFTs(polycrystalline silicon thin film transistors) fabricated on a low cost glass substrate have attracted a considerable amount of attention for pixel elements and peripheral driving circuits in AMLCS(active matrix liquid crystal display). In order to apply poly-Si TFTs for high resolution AMLCD, a high operating frequency and reliable circuit performances are desired. A new poly-Si TFT with CLBT(counter doped lateral body terminal) is proposed and fabricated to suppress kink effects and to improve the device stability. And this proposed device with BC(buried channel) is fabricated to increase ON-current and operating frequency. Although the troublesome LDD structure is not used in the proposed device, a low OFF-current is successfully obtained by removing the minority carrier through the CLBT. We have measured the dynamic properties of the poly-Si TFT device and its circuit. The reliability of the TFTs and their circuits after AC stress are also discussed in our paper. Our experimental results show that the BC enables the device to have high mobility and switching frequency (33MHz at $V_{DD}$ = 15 V). The minority carrier elimination of the CLBT suppresses kink effects and makes for superb dynamic reliability of the CMOS circuit. We have analyzed the mechanism in order to see why the ring oscillators do not operate by analyzing AC stressed device characteristics.

  • PDF

The effect of film morphology by bar-coating process for large area perovskite solar modules

  • Ju, Yeonkyeong;Kim, Byeong Jo;Lee, Sang Myeong;Yoon, Jungjin;Jung, Hyun Suk
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.416-416
    • /
    • 2016
  • Organic-inorganic metal halide perovskite solar cells have received attention because it has a number of advantages with excellent light harvesting, high carrier mobility, and facile solution processability and also recorded recently power conversion efficiency (PCEs) of over 20%. The major issue on perovskite solar cells have been reached the limit of small area laboratory scale devices produced using fabrication techniques such as spin coating and physical vapor deposition which are incompatible with low-cost and large area fabrication of perovskite solar cells using printing and coating techniques. To solution these problems, we have investigated the feasibility of achieving fully printable perovskite solar cells by the blade-coating technique. The blade-coating fabrication has been widely used to fabricate organic solar cells (OSCs) and is proven to be a simple, environment-friendly, and low-cost method for the solution-processed photovoltaic. Moreover, the film morphology control in the blade-coating method is much easier than the spray coating and roll-to-roll printing; high-quality photoactive layers with controllable thickness can be performed by using a precisely polished blade with low surface roughness and coating gap control between blade and coating substrate[1]. In order to fabricate perovskite devices with good efficiency, one of the main factors in printed electronic processing is the fabrication of thin films with controlled morphology, high surface coverage and minimum pinholes for high performance, printed thin film perovskite solar cells. Charge dissociation efficiency, charge transport and diffusion length of charge species are dependent on the crystallinity of the film [2]. We fabricated the printed perovskite solar cells with large area and flexible by the bar-coating. The morphology of printed film could be closely related with the condition of the bar-coating technique such as coating speed, concentration and amount of solution, drying condition, and suitable film thickness was also studied by using the optical analysis with SEM. Electrical performance of printed devices is gives hysteresis and efficiency distribution.

  • PDF

A Study on Minimum Cabin Crew Requirements for Korean Low Cost Air Carriers

  • Yoo, Kyung-In;Kim, Mun-Kyung
    • 항공우주정책ㆍ법학회지
    • /
    • 제33권2호
    • /
    • pp.291-314
    • /
    • 2018
  • 최근 3년간 우리나라의 저비용항공사는 총 6개사(소형항공운송업 항공사 포함 8개사)로서 국내시장 점유 뿐 아니라 일본, 중국, 동남아 및 미국령까지 그 영역을 확대하고 있다. 현재에도 약 3개 항공사가 저비용항공사로 출범하고자 항공운송사업증명을 신청한 상태로서 이 확장세는 지속될 전망이다. 이러한 국내 및 외국의 저비용항공사의 공격적인 항공사 운영 실태에 대응하며 경쟁력을 제고하고자 각 저비용항공사는 객실서비스 증진에 많은 전략을 강구하고 있다. 따라서 객실승무원의 업무량이 확장세에 비례하여 증가되어 안전업무 수행 능력과 직결되는 피로를 가중시키고 있다. 우리나라는 승객 좌석 50석 당 최소 1인의 객실승무원이 탑승하도록 항공안전법 시행규칙에 규정하고 있으며, 이를 기반으로 모든 저비용항공사에는 최소 객실승무원만 탑승하고 있다. 때로는 객실승무원의 주 업무인 비상 시 비상탈출에 필요한 비상구(창문형 비상구 제외)에 착석이 불가능하게 되어 비상 시 승객의 혼란을 야기할 수밖에 없는 상황에 처해 있다. 또한 최소 객실승무원 중 1인이 부상 등으로 업무수행 불능상태가 되면 비상탈출 업무를 수행하는데 큰 장애요소로 작용하게 되고, 정상상황에서도 최소 객실승무원의 성원을 이룰 수 없으므로 위규가 되어, 모든 승객이 다른 가용한 항공사 비행편으로 이동할 수밖에 없는 불편을 초래하게 된다. 국제민간항공협약 부속서 6에는 최소 객실승무원의 수를 정할 때 안전하고 신속한 비상탈출을 위하여 승객좌석 수 또는 탑승 승객 수만을 기반으로 정하도록 국제표준으로 규정하고 있다. 객실안전의 강화 및 승객의 편의를 위하여 객실승무원의 다양한 업무특성(서비스, 안전, 보안, 응급처치)에서 발생할 수 있는 피로 및 비상구 착석(창문형 비상구 제외)을 최소 객실승무원 수 산정에 고려할 필요가 있다. 정부의 항공사 관리.감독 차원에서도 저비용항공사 객실승무원의 업무량에 기인한 피로, 비상구 착석불가 상황 등을 검토하여 최소 객실승무원 수 규정에 반영함으로써 승객과 승무원의 객실안전을 강화할 필요가 있다고 사료된다.

신뢰적인 전력선 통신을 위한 라인 커플러의 개발 (Development of the line coupler for reliable power line communication system)

  • 최원호;임병노;박종연
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
    • /
    • pp.2009-2010
    • /
    • 2006
  • This paper presents an adaptive line coupler to match input impedance of the Power line Communication(PLC) modem between access impedance of the power line. This line coupler provides maximum signal power transmiting capability, high reliability. The structure of this coupler is simple and designed to make a easy and low cost. The proposed line coupler is suitable for Amplitude Shift Keying(ASK) or Phase Shift Keying(PSK) modem. To figure out our models, the analysis of the transmitting features of power line channel is performed in the time domain at the carrier frequency. As a result of this study, we present the values of capacitors in the capacitor bank and adaptive line coupler circuit.

  • PDF