이산화탄소 반응경화 시멘트(Calcium silicate based cement, CSC)는 제조 전 공정에서 보통 포틀랜드 시멘트 대비 최대 70% 가량의 CO2 감축을 기대할 수 있는 저탄소 시멘트로 해외 선진국가에서는 이미 상용화 단계에 도달하였으나 국내에서는 제조특성 및 기초물성연구가 시작되고 있는 단계이다. 이에 본 연구에서는 국내산 원료물질을 활용한 CSC 제조 가능성을 검토하고, 제조한 CSC의 기초물성평가를 통해 CSC의 국산화 가능성을 조사하고자 하였다. 실험결과, 국내산 고품위 석회석과 실리카흄을 활용해 제조한 CSC의 주요광물상은 CS, C3S2, C2S 및 미반응 SiO2로 이론적인 CSC 주요광물상과 유사한 특성을 나타내며, 국내산 원료물질을 활용한 CSC 제조가능성을 확인할 수 있었다. 제조한 CSC의 경화특성 조사를 위해 양생분위기에 따른 광물상 변화특성을 조사하였으며, TG/DSC 열분석결과, 탄산화양생을 실시한 샘플에서만 탄산화반응 결과생성물로서 다량의 CaCO3가 생성된 것을 확인할 수 있었다. 이러한 특성은 압축강도에서 뚜렷한 차이를 나타내었는데, 습윤양생 시 재령 7일 기준 압축강도 1MPa 이하로 수화반응 및 탄산화반응에 의한 물성발현이 거의 없는 반면에 탄산화 양생 시 재령 7일 기준 압축강도 56MPa 이상으로 조기강도 특성이 우수한 것을 확인할 수 있었다.
최근 우수한 전기전도도와 넓은 비표면적을 갖는 탄소나노튜브(CNT)를 활용하여 고강도 및 고내구성 콘크리트의 생산을 위한 연구가 많은 연구자들에 의하여 활발히 이루어지고 있다. CNT의 혼입을 통한 콘크리트의 고강도에 대한 연구가 주를 이루고 있으나, 그 외의 연구는 미흡한 실정이다. 이에, 본 연구에서는 CNT 첨가량에 대한 시멘트 복합체의 역학성능 및 발열성능에 대한 평가를 실시하였다. 낮은 물-바인더 비를 기반으로 하는 시멘트-플라이애시 배합에 대하여, 바인더 중량대비 0.2% 및 0.5%의 CNT 첨가에 따른 재령별 압축강도, 수화특성분석을 위한 미소수화열 분석, 페이스트 내 CNT의 분산 및 주변 수화물과의 관계를 규명하기 위한 SEM분석, 기준전극 삽입을 통한 발열실험 및 열 중량 분석을 실시하였다. CNT 첨가량의 증가에 따라 발열성능은 증가하며, CNT가 첨가되지 않은 기준 배합 CNT가 첨가된 배합의 경우 동등수준의 역학성능을 갖는 것으로 나타났다.
Today, concrete remains the most important, durable, and reliable material that has been used in the construction sector, making it the most commonly used material after water. However, cement continues to exert many negative effects on the environment, including the production of carbon dioxide (CO2), which pollutes the atmosphere. Cement production is costly, and it also consumes energy and natural non- renewable resources, which are critical for sustainability. These factors represent the motivation for researchers to examine the various alternatives that can reduce the effects on the environment, natural resources, and energy consumption and enhance the mechanical properties of concrete. Geopolymer is one alternative that has been investigated; this can be produced using aluminosilicate materials such as low calcium (class F) FA, Ultra-Fine GGBS, and high calcium FA (class C, which are available worldwide as industrial, agricultural byproducts.). It has a high percentage of silica and alumina, which react with alkaline solution (activators). Aluminosilicate gel, which forms as a result of this reaction, is an effective binding material for the concrete. This paper presents an up-to-date review regarding the important engineering properties of geopolymer formed by FA and slag binders; the findings demonstrate that this type of geopolymer could be an adequate alternative to ordinary Portland cement (OPC). Due to the significant positive mechanical properties of slag-FA geopolymer cements and their positive effects on the environment, it represents a material that could potentially be used in the construction industry.
This study is about the mortar in which fine aggregate is substituted by low-carbon eco-friendly inorganic composite prepared by addition of alkali accelerator in industrial by-products such as blast furnace slag, red mud and silica fume as a replacement for cement. Results of experiments on flow and strength properties in mortar of inorganic composite according to replacement rate of fine aggregate showed that amount of air and table flow decreased as replacement rate of fine aggregate about inorganic composite got higher. Also, it's shown that the compressive strength was the highest at replacement rate 50% of fine aggregate about inorganic composite.
본 연구에서는 탄소계 나노소재를 적용한 시멘트 페이스트 복합체의 유변학적 특성을 실험적으로 분석하였다. 탄소계 나노소재인 산화그래핀과 탄소나노튜브의 사용성을 고려하여 수용액 상태로 혼입한 굳기전 시멘트 페이스트에서 흐름성 및 레올로지를 측정하였다. 그리고 굳은 시멘트 페이스트 복합체는 만능재료 실험기를 활용하여 압축강도 측정을 검토하였다. 산화그래핀은 수용액 상태로 혼입하였을 때 혼입율 상승 시 흐름성이 감소하고 소성 점도와 전단응력이 급격하게 증가하였다. 탄소나노튜브 수용액도 동일한 경향성을 가졌으나 시멘트 중량대비 0.2 % 미만을 혼입한 경우 산화그래핀과 비교하여 상대적으로 증가율이 낮게 측정되었다. 이는 판상형 형태인 그래핀의 비표면적이 커서 시멘트 페이스트의 흐름성을 감소시키고 소성 점도와 전단응력을 상승시키는 것으로 판단된다. 탄소나노튜브 수용액은 0.2 %이상 혼입 시 소성점도가 일반배합 대비 2.16배 수준으로 급격히 상승하며 전단응력도 상대적으로 높게 측정되었다. 이는 탄소나노튜브의 혼입량이 과혼입 되면서 시멘트 페이스트 내에서 분산이 제대로 되지 않아 탄소나노튜브 간의 뭉침으로 인한 응집효과로 판단된다. 압축강도는 그래핀 혼입시 강도 상승율이 미미하였으며, CNT는 최대 약 12 %의 상승효과가 있음을 확인하였다. 따라서 탄소계나노소재 적용 시 상대적으로 CNT를 사용할 경우가 사용 가능성이 높을 것으로 판단되나 최대 혼입량 및 분산에 사용될 계면활성제에 대한 추가적인 연구가 필요할 것으로 판단된다.
To improve the initial strength and stability of lightweight-foamed concrete, which shows suitable sound absorption and insulation characteristics, the effect of CO2-reduced cement on the properties of the concrete was investigated. Various mixing ratios were applied by substituting a certain amount of slag and Calcium Sulfo Aluminate (CSA) in CO2-reduced Ordinary Portland Cement (OPC) and the physical properties of the samples were examined using the Korean Standard. The kiln temperatures of the CSA were 100-200℃ ; these values are lower than those of OPC and can lead to energy saving. In addition, the low limestone content reduces greenhouse gas emissions by 20 %. Adding a small amount of CSA in OPC content activates Ca-Al-H2-based hydrates, and the initial compressive strength of the concrete is improved. As the CSA content increased, the thermal conductivity of the concrete decreased by up to 8% compared to plain concrete, thus indicating an improvement in its insulation. Therefore, the settlement stability was improved as the addition of CSA shortened the setting time.
국내 화력 발전소에서는 연간 900만 ton 이상의 석탄회가 발생되고 있으며, 약 30%는 재활용되지 못하고 매립되고 있다. 현재 국내 매립장은 대부분이 만지 상태에 이르렀고, 해양 환경오염 발생이 우려되어 대량의 재활용 방안이 필요할 실정이다. 한편, 환경부는 그동안 시멘트 점토질 원료로 사용되는 일본산 석탄회의 수입 규제를 추진하고 있어 대체재의 개발이 시급한 상황이다. 따라서 본 연구에서는 국내 매립 석탄회의 화학성분을 분석하고, 일본산 석탄회와 비교를 통해 시멘트 원료로의 활용 가능성을 검토하였다. 그 결과를 요약하면 SiO2는 전체적으로 다소 낮은 값을 나타내 규산질 원료의 사용량을 증가시킬 필요가 있다. Al2O3는 특별한 경향은 없으나, 일부 낮은 값을 나타내는 경우는 점토질 물질이 부족할 수 있어 매립 석탄회의 사용량 증대를 검토해야 한다. Fe2O3는 전체적으로 다소 높은 값을 나타내 철질 원료의 사용량 감소가 가능할 것으로 판단된다. 국내 매립 석탄회는 전체적으로 염화물을 포함하고 있으며, 염소 제거공정을 통해 상당부분 제거될 것으로 판단되나, 시멘트 품질 및 장비의 유지관리 측면을 고려하면 담수 이송 및 표층부 매립 석탄회가 사용에 유리하다. 따라서 국내 매립 석탄회는 시멘트 광물 구성을 위한 시멘트 원료의 배합비 조정과 염소 제거공정을 통해 일본산 석탄회의 대체가 가능할 것으로 분석된다.
The carbon dioxide($CO_2$) released while producing building materials is substantial and has been targeted as a leading contributor to global climate change. One of the most typical method to reducing $CO_2$ for building materials is the addition of slag and fly ash, like pozzolan material, while another method is reducing $CO_2$ production by carbon negative cement development. The MgO-based cement was from the low-temperature calcination of magnesite required less energy and emitted less $CO_2$ than the manufacturing of Portland cements. It is also believed that adding reactive MgO to Portland-pozzolan cements could improve their performance and also increase their capacity to absorb atmospheric $CO_2$. In this study, the basic research for magnesia cement using $MgCO_3$ and magnesium silicate ore (serpentine) as main starting materials, as well as silica fume, fly ash and blast furnace slag for the mineral admixture, were carried out for industrial waste material recycling. In order to increase the hydration activity, $MgCl_2$ was also added. To improve hydration activity, $MgCO_3$ and serpentinite were fired at $700^{\circ}C$ and autoclave treatment was conducted. In the case of $MgCO_3$ as starting material, hydration activity was the highest at firing temperature of $700^{\circ}C$. This $MgCO_3$ was completely transferred to MgO after firing. This occurred after the hydration reaction with water MgO was transferred completely to $Mg(OH)_2$ as a hydration product. In the case of using only $MgCO_3$, the compressive strength was 3.5MPa at 28 days. The addition of silica fume enhanced compressive strength to 5.5 MPa. In the composition of $MgCO_3$-serpentine, the addition of pozzolanic materials such as silica fume increased the compression strength. In particular, the addition of $MgCl_2$ compressive strength was increased to 80 MPa.
International Journal of Concrete Structures and Materials
/
제8권4호
/
pp.309-313
/
2014
The volume fraction of the coarse aggregate in the conventional plastic concrete is controlled relatively low to ensure a required workability. In this paper, a new type of coarse aggregate interlocking concrete with strength ranging from C30 to C80 was prepared with scattering-filling aggregate process. The strength of concrete prepared with this method increases obviously whereas the shrinkage decreases significantly, the cement dosage in the concrete decreased 20 % at the same time. The microhardness of the ITZ between the cement paste and scattering-filling aggregate is higher than that of the original aggregate, the ITZ become narrower and tighter also. The interlocking and more even distribution of the coarse aggregate and the water absorption of the addition of extra amount of coarse aggregates contribute to the strength and performance improvement of the concrete prepared with scattering-filling aggregate process.
The given research focuses on examining the effect of relatively humidity (RH) and curing temperature on the hydrates as well as the porosity of calcium sulfoaluminate (CSA) cement pastes. Numerous tests, which consist of mercury intrusion porosimetry (MIP), thermosgravi metric (TG) and X-ray diffraction (XRD) were conducted. Various characterization techniques which include, scanning electron microscopy, Fourier transform microscopy along with X-ray diffraction evaluations were conducted on the samples to examine phase formation and crystallinity, morphology and microstructure along with bond formations and functional groups, respectively. During long-term study, the performance of concrete which consisted of limestone and flash-calcined was close to those from standard Portland cement concrete. Traditional classifications and methods of corrosion were widely used for the assessment of steel in concrete which may get employed to concrete which contains LC3 to recalibrate the range of polarization resistance for passitivity condition. For example, there is up to 79.5% and 146% respective flexural and compressive strengths. Moreover, they developed more advance electrical and thermo-mechanical performance with a substantial reduction in absorption of water of close to 400%. These advantages allow this research crucial to evaluate how these methods can be applied. Additionally, the research evaluates developed and more advanced cement preservation and repair techniques. The conclusion suggests concerted efforts by various stakeholders such as policy makers to enable low-carbon rates.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.