• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.4
• /
• pp.392-402
• /
• 2010

Black carbon (BC) concentrations were measured with an aethalometer (AE-16, 880 nm) at time interval of 5-min at an urban site of Gwangju over a year 2008. 24-hr filter-based integrated measurements of $PM_{2.5}$ particles were also made at the same site during the winter and summer intensive periods to test any optical loading bias in the raw BC data measured by aethalometer. BC concentration was higher in winter than in summer, possibly due to increase in emissions from energy consumption and poor dispersion with reduction of boundary layer in winter. Also temporal cycles of BC indicate that short-term transient spikes were common, occurring primarily during the rush-hour periods. A similar feature was also observed in diurnal concentration cycle of CO, mainly emitted from motor vehicles. When both low wind speed and weather patterns such as mist, haze and etc were combined, high BC concentrations frequently occurred. The amount of optical loading effect described by the "k" factor showed the seasonal variation, ranging from 0.0003 to 0.0036. This implies that optical loading effect is not seen at all times. From the comparison between the filter-based elemental carbon (EC) and aethalometer BC data, it was found that the loading compensated BC values were more reasonable than the raw BC ones reported from the aethalometer.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.3
• /
• pp.107-117
• /
• 2013

Problems in regard of ecological stability of urban ecosystem ensue from climate change and urbanization. Particularly, urban ecological conditions are deteriorating both quantitatively and qualitatively to a great extent. The present study aims to assess the current condition of selected sites (i. e. urban green zones and parks) in terms of preset assessment components; to find out problems and relevant solutions to improve the quality and quantity of parks and green zones; and ultimately to suggest some measures applicable to coping with climate change as well as to securing the ecological attributes of urban green zones and parks. According to the findings of this study, from quantitative perspectives, ecological attributes and responsiveness to climate change are high on account of the large natural-soil area(80%). By contrast, from qualitative perspectives including the planting structure (1 layer: 47%), the percentage of bush area(17%), the connectivity with surrounding green zones (independent types: 44%), the wind paths considered (5.6%), the tree species with high carbon absorption rates (20%), water cycles (17%), energy (8%) and carbon storage capacities(61%), ecological attributes and responsiveness to climate change were found very low. These findings suggest that the ecological values of urban parks and green zones should be improved in the future by conserving their original forms, securing natural-soil grounds and employing multi-layered planting structures and water bodies, and that responsiveness to climate change should be enhanced by planting tree species with high carbon storage capacities and obtaining detention ponds. In sum, robust efforts should be exerted in the initial planning stages, and sustained, to apply the methodology of green-zone development along with securing ecological attributes and responsiveness to climate change.

• 한국해양학회지
• /
• v.25 no.4
• /
• pp.161-181
• /
• 1990

A numerical model is established in order to simulate the storm surges which were observed in the seas around Korea during typhoon and winter storm periods. The typhoons are Brenda (1985), Vera (1986) and Thelma (1987). the winter storm period is January 1-6, 1986. The simulated surges for the typhoon periods show good agreements with the recorded ones for the periods at the Korean coasts, but those for the winter storm show fair agreements in general tendencies, not in details. The model simulation in open sea shows a positive sea level near the typhoon center and a native sea level behind the typhoon. the positive surge seems to be due to the low pressure near a typhoon center and the negative on due to the wind stresses of the typhoon. The negative sea level is usually in the form of an elongated gyre. In the gyre, there is a cyclonic circulation of sea water, in which the pressure gradient force induced by the circular depression of the sea surface is balanced by the Coriolis force in readjusting stage.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.2 no.4
• /
• pp.190-199
• /
• 1990

The solution for wind drift current in a three-layered open sea region is derived using the Galerkin-Eigenfunction mothod. The presence of discontinuities in the vertical eddy viscosity required a definition of a scalar product which involves the summation of integrals defined over each layer. The expansion of fourth-order B-spline functions is used in determining eigenvalues and corresponding eigenfunctions. In a three-layered system a low value of eddy viscosity is prescribed within the pycnocline to represent the suppression of turburent intensity at the thermocline level. A high concentration of knots within the pycnocline is important in determining eigenfunctions and the associated eigenvalues accurately. Due to the global property of eigenfunctions nonphysical oscillations appear in the current profiles below the surface layer, particularly within the pycnocline.

• Journal of Life Science
• /
• v.8 no.6
• /
• pp.687-694
• /
• 1998

Enzyme electrophoresis was used to estimate genetic diversity and population structure of Chimaphila japonica Miq. in Korea. The percent of polymorphic loci within the enzymes was 48.7%. Genetic diversity at the species level and at the population level was high (Hes=0.278 ; Hep=0.222, respectively), whereas the extent of the population divergence was relatively low ( $G_{ST}$ =0.079). $F_{IS}$ , a measure of the deviation from random mating within the 7 populations, was 0.355. An indirect estimate of the number of migrants per generation (Nm=2.61) indicates that gene flow is high among Korean populations of the species. In addition, analysis of fixation indices revealed a substantial heterozygosity deficiency in some populations and at some loci. Factors contributing to the high levels of genetic dive-rsity found in the entire species of C. japonica include wide distribution, long-lived perennials, ability to regenerate due to rhizomatous spread, outcrossing induced by animal vectors, and occasional pollen dispersal by wind.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.13-18
• /
• 2016

Humidifiers are used to control indoor humidity. Element-type humidifiers have the advantages of simple structure and low energy consumption, and Japanese products have been widely used for the humidifying elements. In this study, a new humidifying element made of cellulose and PET was developed, and the performance was compared with that of a Japanese element. The mass transfer rates and pressure drops were measured for an element installed at the entrance of a suction-type wind tunnel. The humidification efficiency of the new element was 2 to 4% greater and the pressure drop was 23 to 32% smaller compared to the Japanese element. The mass transfer effectiveness ($j_m/f$) of the new element is also 5 to 28% higher. However, the water absorption capacity was smaller than that of the Japanese element, meaning further development is needed.

• Journal of Energy Engineering
• /
• v.29 no.1
• /
• pp.44-51
• /
• 2020

The importance of ESS has been emphasized due to stabilization of power demand due to deterioration of network reliability and expansion of renewable energy sources. ESS (Energy Storage System) stores the remaining power and uses it when necessary to meet the power demand, and build the ESS system mainly in conjunction with solar and wind power. In this paper, we propose a home PV Charging Module using the Master-Slave method which is effective for low insolation. After designing the module, Fast MPPT algorithm is applied to generate the maximum output from the nonlinear output characteristics of the PV modules. The average power value for the input of PV Charging Module was 296.90 W and the output power was 289.60 W, which averaged 97.54%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.2
• /
• pp.69-74
• /
• 2015

Recently, energy harvesting technology is increasing due to the fossil fuel shortages. Energy harvesting is generating electrical energy from wasted energies as sunlight, wind, waves, pressure, and vibration etc. Energy harvesting is one of the alternatives of fossil fuel. One of the energy harvesting technologies, the piezoelectric energy harvesting has been actively studied. Piezoelectric generating uses a positive piezoelectric effect which produces electrical energy when mechanical vibration is applied to the piezoelectric device. Piezoelectric energy harvesting has an advantage in that it is relatively not affected by weather, area and place. Also, stable and sustainable energy generation is possible. However, the output power is relatively low, so in this paper, newly designed honeycomb shaped piezoelectric energy harvesting device for increasing a generating efficiency. The output characteristics of the piezoelectric harvesting device were analyzed according to the change of parameters by using the finite element method analysis program. One model which has high output voltage was selected and a prototype of the honeycomb shaped piezoelectric harvesting device was fabricated. Experimental results from the fabricated device were compared to the analyzed results. After the AC-DC converting, the power of one honeycomb shaped piezoelectric energy harvesting device was measured 2.3[mW] at road resistance 5.1[$K{\Omega}$]. And output power was increased the number of harvesting device when piezoelectric energy harvesting device were connected in series and parallel.

• Korean Journal of Remote Sensing
• /
• v.36 no.4
• /
• pp.573-586
• /
• 2020

PM (particulate matter) is of interest to everyone because it can have adverse effects on human health by the infiltration from respiratory to internal organs. To date, many studies have made efforts for the prediction of PM10 and PM2.5 concentrations. Unlike previous studies, we conducted the prediction of tomorrow's PM10 concentration for the Air Korea stations using Chinese PM10 data in addition to the satellite AOD and weather variables. We constructed 230,639 matchups from the raw data over 3 million and built an RF (random forest) model from the matchups to cope with the complexity and nonlinearity. The validation statistics from the blind test showed excellent accuracy with the RMSE (root mean square error) of 9.905 ㎍/㎥ and the CC (correlation coefficient) of 0.918. Moreover, our prediction model showed a stable performance without the dependency on seasons or the degree of PM10 concentration. However, part of coastal areas had a relatively low accuracy, which implies that a dedicated model for coastal areas will be necessary. Additional input variables such as wind direction, precipitation, and air stability should also be incorporated into the prediction model as future work.

• The Journal of the Petrological Society of Korea
• /
• v.27 no.1
• /
• pp.17-24
• /
• 2018

The volcanic history of the volcanic ash cloud movement recorded in the annals of the Choson dynasty in 1654, presumably due to explosive eruptions from Mt. Baekdu volcano. On October 21, 1654, volcanic ash and volcanic gas erupted from Mt. Baekdu could be interpreted as volcanic ash, which was transported to low altitude by winds of north and northeast winds and descended to the south of the peninsula along with volcanic ash clouds. The affected area appeared northward in the southern boundary of Hamgyeongdo, which is estimated to have moved the volcanic ash from Mt. Baekdu to the south of the Korean peninsula. Clouds of volcanic ash have passed through Jeokseong and Jangdan area, Gyeonggido about 500 km away from Mt. Baekdu. This is interpreted as a result of the formation of a volcanic ash cloud along the ground in a curved shape due to the influence of the prevailing wind, which was formed by Plinian-type eruption at Mt. Baekdu. This is reproduced by numerical simulations on the similar weather pattern model.