• 한국식품조리과학회지
• /
• 제33권1호
• /
• pp.87-93
• /
• 2017

Purpose: Rice starch is known not to be suitable to Mook. Its gel is not hard and elastic enough and too sticky. This study investigated the effects of agar, carrageenan, and gelatin addition on low amylose rice flour paste and gel properties for making Mook. Methods: Angemi, low amylose rice, and Goamibyeo, intermediate amylose rice, were dry milled. The properties of Mook were determined by texture profile analysis (TPA), cold storage stability, and sensory acceptance. Results: Addition of agar and carrageenan increased cold paste viscosity, whereas addition of gelatin decreased cold paste viscosity while improving breakdown and setback viscosity. When 30% of gelling agents such as agar, carrageenan, and gelatin were added to low amylose rice, Angemi, Mook-like gels were formed. The hardness, adhesiveness, and springiness of gelling reagent-added Angemi Mook increased, whereas cohesiveness decreased, and fracturability was not observed. The addition of gelling agent decreased lightness and increased yellowness. Angemi Mook added with gelatin showed the best freeze-thaw stability while addition of agar and carrageenan increased syneresis. The carrageenan-added Angemi Mook was equal to Goamibyeo 100% Mook in all sensory acceptance properties without significant difference. Conclusion: Above results suggest that addition of carrageenan and gelatin to low amylose rice can be used to produce Mook with improved physical properties.

• 펄프종이기술
• /
• 제45권4호
• /
• pp.1-8
• /
• 2013

High loading of printing and writing grades with fillers has many advantageous aspects in papermaking because it allows decreasing fiber use and reducing manufacturing cost. High loading technology, however, has some disadvantageous aspects as well. It decreases physical properties of papers, especially strength properties. The problem associated with high loading can be reduced by applying surface sizing starch solution onto paper surface. It is important to control the penetration of the surface sizing starch solution into paper web to obtain the desired property improvement. In this study, the effect of the addition of two polymers into starch solution on paper properties has been examined. PVOH and polyDADMAC were used as polymeric additives for surface sizing with oxidized starch. Viscosity of starch solutions and surface roughness of dried starch films on glass slides showed that some interactions between polymeric additives and oxidized starch have been occurred and the most extensive interaction with starch solution was obtained with high molecular weight polyDADMAC. Low molecular weight PVOH was most effective in improving folding endurance and internal bond strength. On the other hand, polymer addition showed no effect on surface strength of paper. This indicates that not the level of starch holdout but the bonding strength of starch itself has predominant influence on surface strength of paper.

• 한국식품과학회지
• /
• 제25권4호
• /
• pp.334-339
• /
• 1993

전분입자의 크기는 동부와 녹두가 좀 작았으며, 강남콩과 팥은 약간 더 컸다. 아밀로오스 함량은 녹두와 강남콩이 시료 중 약간 더 많았으나 모두 $25{\sim}29%$의 범주였다. 강남콩전분의 팽윤력은 전 온도범위에서 다른 시료에 비해 아주 낮았다. Brabender Visco/amylo/Graph 결과는 동부, 녹두, 팥은 호화 점도도 크고, 노화시점도의 증가도 크지만, 강남콩은 점도의 증가가 아주 낮았다. 아밀로그램에서 점도의 변화양상은 아밀로오스 함량과는 관계가 없고, 아밀로오스의 크기나 전분립의 형태, 결정화 정도 등에 더 밀접한 관계가 있었다. DSC에 의해 조사한 호화 양상에서 강남콩이 호화 개시온도가 다른 시료보다 더 높았으며 동부와 녹두는 대체로 낮은 편이었으나 이들의 호화엔탈피는 거의 비슷하였다. 이상의 결과에서 동부와 녹두전분의 특성은 거의 유사하였으며, 강남콩은 이들과 많은 차이를 보였고, 팥은 중간적 특성을 나타냈다.

• Applied Biological Chemistry
• /
• 제50권3호
• /
• pp.160-166
• /
• 2007

본 연구는 초미세 분체기술을 이용하여 쌀 전분의 입자구조 파괴가 이루어졌을 때 분자구조적, 물리적 변화가 어떻게 이루어지는지를 구명하고자 하였다. 분쇄 후 쌀 전분의 평균직경은 약 20% 감소가 이루어졌으며 비표면적은 25% 증가하였다. 분쇄 전후의 쌀 전분에 대한 분자량분포를 GPC(gel permeation chromatography)로 측정한 결과 Peak II의 면적이 36.5%에서 59.5%로 상승하였다. 분쇄 전후 손상전분 정도는 각각 16.40%와 99.2%로 나타났다. 분쇄 전에 비하여 분쇄 후 쌀 전분의 물결합능력, 용해도와 광 투과도에서도 월등히 높았다. $30^{\circ}C$에서 20 rpm을 기준으로 분쇄후의 쌀 전분의 겉보기점도는 상대적으로 분쇄 전의 7% 수준에 불과하였으며 측정온도가 높아짐에 따라서 차이는 더욱 커졌다.

• 펄프종이기술
• /
• 제29권3호
• /
• pp.17-25
• /
• 1997

Natural water-soluble polymers such as starch, casein and carboxy methyl cellulose(CMC) have been limited in their uses. However, the proper water retention of coating colors can not be obtained without addition of these polymers. Furthermore, the coating runnability and the physical properties of coated paper were not also satisfied. Therefore, the objective of this study was to synthesize the water retention and flow modifiers which can improve the water retention and flow properties of coating colors. We have measured physical properties of flow modifiers and coating colors which included flow modifiers. The viscosity of flow modifiers was very low at acid pH, and rapidly increased at about pH 7, and gradually reached to equilibrium at alkali pH. Such an increase comes from the molecular weight of flow modifiers and the amount of acrylic and methacrylic acids. The viscosity of coating color containing the flow modifiers was lower than that containing CMC. However, both of them had little difference in water retention. The water-phase viscosity of synthetic modifier containing coating color was either higher or similar compared to that of CMC containing coating color. The high shear viscosity of coating colors was low. Therefore, it can be concluded that the synthetic flow modifiers are very useful for improvement of flow properties and water retentions.

• Food Science and Biotechnology
• /
• 제18권5호
• /
• pp.1145-1149
• /
• 2009

Physicochemical properties of native and acid-modified Job's tears (Coix lachryma-jobi L.) starches were investigated. Starch extracted from Job's tears was treated with 2.2 N hydrochloric acid for different length of time (3, 6, 12, and 18 hr). The hydrolysis pattern of starches with the acid proceeded rapidly up to 12 hr and then the approached constant values. The swelling power of acid-modified starches measured at all temperatures was lower than that of its native counterparts and the water solubility index increased as temperature and hydrolysis time increased. Rapid visco analyzer viscograms of acid-modified starches demonstrated a very low viscosity as compared with that of native starch. However, Xray diffraction did not show any significant alteration in the crystallinity after acid-modification.

• 한국식품과학회지
• /
• 제28권3호
• /
• pp.580-586
• /
• 1996

감자 전분을 epichlorohydrin과 반응시적 제조한 가교결합 감자 전분(가교파도 2,300, 2,100, 1,900 AGU/CL)의 호화 특성과 호화 중 전분 입자의 형태학적 변화를 조사하였다. 천연 감자 전분은 한 단계의 급격한 팽윤 양상을 보이나, 동부 전분은 두 단계, 가교결합 전분은 가교화도에 따라 각각 다른 평윤 양상을 나타내었다. 가교화도가 증가할수록 팽윤력과 용해도는 입자의 팽윤이 억제되어 크게 감소하였다. 광투과도는 가교파도가 증가할수록 감소하였다. 가교결합 전분 입자의 팽윤이 동부 전분에 비해 억제되었음에도 불구하고 $55{\sim}95^{\circ}C$ 온도 법위와 2.5%까지 의 농도 범위에서는 동부 전분보다 더 투병하였다. 아밀로그래프에 의한 초기 호화온도는 가교화도가 증가할수록 입자의 팽윤이 지연되어 올라갔으며, 최고점도에 도달하는 시간이 매우 지인되었다 가교화도 2,300과 2,100 AGU/CL 가교 전분은 어느정도 팽윤이 억제되며 동시에 팽윤된 전분 입자가 내열성과 내전단성을 갖게되어 서서히 점도가 증가하여 천연 감자 전분보다 더 높은 최고 점도에 도달하는 반면에, 1.900AGU/CL 가교 번분은 너무 강하게 팽윤이 억제되어 최고 점도를 나타내지 못하였다. 또한 가교 결합 전분의 setback과 consistency 정도는 천연 감자 전분과는 달리 생각하면 젤 형성도 가능함을 시사하였다. 가교화도가 낮을 때는 사방으로의 접선방향의 팽윤이 가능하였으나, 가교화도가 증가함에 따라 밀전분과 같은 일차원적인 접선방향의 팽윤이 우세해졌다. 가열 중 전분입자의 형태학적인 미세구조의 변화는 가교화도에 따른 호화특성들의 차이를 잘 설명하여 주었다.

• 펄프종이기술
• /
• 제48권3호
• /
• pp.51-56
• /
• 2016

The most widely used glue in a corrugator is starch, which is a natural polymer. This material needs thermal energy to achieve a binding force, so a heating section is installed in a corrugator. However, this heating section can cause quality problems in linerboards and corrugating medium and increase the production cost because of the high cost of fossil resources. Therefore, a new adhesive that provides the binding force at lower temperatures than the conventional one must be developed. In this study, SB-latex was selected as a co-adhesive and added to the starch solution. The addition of the SB-latex was determined based on the viscosity of the new adhesive. The adhesive strength and the drying energy reduction of a corrugated board were measured to evaluate the functionalities of the new adhesive. The addition of SB-latex was determined to be under 20% of the oven-dried starch based on the viscosity of the new adhesive. The adhesive strength was improved and the drying energy was reduced by applying the new adhesive.

• 한국식품조리과학회지
• /
• 제20권4호
• /
• pp.396-402
• /
• 2004

증편의 sponge상의 망상구조에 쌀 단백질의 영향을 조사하기 위하여 증편제조시 주원료인 쌀 단백질을 분리하고 증편 발효시 그 변화를 살펴보았으며 protease 첨가가 증편의 점도 및 부피에 미치는 영향을 살펴보았다. 또한 쌀 전분에 단백질을 첨가하여 증편의 점도 및 부피에 미치는 영향을 살펴본 결과 쌀 단백질이 증편의 부피 팽창에 영향을 주는 것으로 생각되었다. 쌀 및 증편 반죽에서는 SDS 가용성 단백질 함량이 밀가루와 비교해 높게 나타났으며 발효시간에 따른 단백질 추출량은 큰 변화가 없었다. 그러나 증편반죽의 시간별 FPLC패턴은 발효시간에 따라 저분자 peak가 감소하여 고분자화함을 알 수 있었다. 단백질 분해효소 protease를 첨가하여 본 결과 증편의 점도 및 부피는 현저히 감소하였고 쌀 전분에 단백질을 첨가하여 증편을 재구성한 결과, 점도, 부피는 증가하는 것으로 나타나 증편내에서 쌀 단백질이 증편의 부피 내지는 조직감 형성에 크게 영향을 미치는 것으로 생각되어진다.

• Preventive Nutrition and Food Science
• /
• 제13권3호
• /
• pp.249-252
• /
• 2008

Flow behaviors of sweet potato starch (SPS) pastes (5% w/w) were studied in the presence of various sugars (xylose, glucose, fructose and sucrose) and sugar alcohols (xylitol and sorbitol). The flow properties of SPS-sugar mixtures were determined from the rheological parameters of power law model. The vane method was also employed for determining yield stresses of SPS-sugar mixtures directly under a controlled low shear rate. At $25^{\circ}C$ all the samples showed shear-thinning behaviors ($n=0.35{\sim}0.44$) with yield stress. The consistency index (K) values of SPS-sugar mixtures increased in the following order: sorbitol> xylitol> control (no sugar)> sucrose> fructose> glucose> xylose, showing that the addition of sugar alcohols enhanced the K values. The yield stress values were reduced in the presence of ugars and sugar alcohols and they also increased with an increase in swelling power of starch granules in the SPS-sugar mixture systems.