• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.5
• /
• pp.54-62
• /
• 2012

The main role of surface sizing of linerboard is to improve surface and strength properties. Since surface sizing solution is applied on once dried web, substantial amount of drying energy is required. Saving of the drying energy associated with surface sizing can be made by increasing the solids content of the starch solution in size press. Therefore, it is highly desirable to develop low viscosity starches for surface sizing. A low viscosity oxidized starch was prepared and compared its effect of surface sizing with a conventional oxidised starch. Results showed increase in solids content of the starch solution decreased evaporation energy and drying time. Low viscosity starch penetrated deeper into paper and this improve various mechanical properties of linerboard.

• Journal of the Korean Society of Food Culture
• /
• v.22 no.2
• /
• pp.254-260
• /
• 2007

This study was examined closely physiological activation and intended to present the possibility of developing food low-fat food. Developing carbohydrate fat replacer as materials for low-fat food made of Korean potato starch, it is expected that the new demand of fat replacer will be created. Potato starch was modified by chemical modification. The calorie of starch of GPS was measured to be 3.0 kcal/g, those of chemically modified starch, HPR showed 2.5 kcal/g respectively, suggesting that calorie is decreased by modified treatment. The appropriateness of processing food was experimented by substituting the existing oil and fat containing food with gel of starch and modified starch in constant rate through utilization of modified starch. When producing mayonnaise by substituting edible oil with gel of modified starch in 10-50%, calorie was reduced by 44${\sim}$45% when substituted by 50%, suggesting the potential of low-fat food. Measuring viscosity of mayonnaise by Brookfield viscometer, the mayonnaise with HPR showed high viscosity and the chemical modified starch group of EZ also showed high viscosity. Generally, the material property of mayonnaise tended to reduce in all measured items when oil and fat are substituted by starch substituting materials and the substituting materials increase. When it comes to the emulsification stability of mayonnaise with starch substituting materials, emulsification stability of all mayonnaise with starch substituting materials is lower than that of compared group. While the group with NL as commercial fat replacer showed emulsification stability which was slightly higher than group with modified starch and the substitution group of HPR showed higher emulsification stability. Sensory evaluation for low-fat mayonnaise by substituting oil the products substituted by modified starch was more preferred than general starch substituting products such as GPS. While NL as commercially fat replacer showed the hight preference, products with H40, EZ were also highly preferred.

• Journal of the Korean Society of Food Culture
• /
• v.22 no.1
• /
• pp.91-96
• /
• 2007

Developing carbohydrate fat replacer as materials for low-calorie and low-fat food made of Korean potato, it is expected that the new demand of fat replacer will be created. Potato starch was modified by chemical modification. Observing modified starch(treated in different method) by SEM, EZ(treated by enzyme) showed shape of deformed round oval, AC(treated by acetylation,), HPR(treated by hydropropylation) showed shape similar to that of NL(N-Lite), the commercial fat replacer. In the modified starch such as AC, peak in B and C type similar to those of general starch was found, but EZ showed non-crystalline shape. Compared to other modified starch, HPR, the chemically produced denatured starch showed very peculiar peak and structure in V-form. While the order of contents of amylopectin was in the order HPR > EZ > AC showed extremely high contents. Measuring the degree of gelatinization per the modified method, the degree of gelatinization of HPR as much higher than others. The water binding activity of modified starch was 240% in HPR. Measuring viscosity by producing general starch and modified starch as gel of 10% concentration, the CPS showed very high viscosity of 30.30 ${\times}$ 10$^3$ cp. Showing viscosity of 38.60, 31.60 10$^3$ ${\times}$ cp, the modified starch was in the order of HPR. While the calorie of starch of GPS was measured to be 3.0 Kcal/g, very low calorie those of chemically modified starch, HPR showed 2.5 Kcal/g respectively, suggesting that calorie is decreased by modified treatment. The appropriateness of processing food was experimented by substituting the existing oil and fat containing food with saturated gel of starch and modified starch in constant rate through utilization of modified starch. Therefore, research and development for materials and related products which maintain the existing quality and reduce fat contents will be constantly performed in the future.

• Preventive Nutrition and Food Science
• /
• v.4 no.3
• /
• pp.175-179
• /
• 1999

To develop a production method for modified starches with less pollution, pH adjustment and gamma irradiation were applied to commerical corn starch. Blue values were significantly decreased , while alkali number, optical transmittance and solubility markedly increased when gamma irradiation was applied to pH 2 adjusted corn starch. Water binding capacity and swelling power at pH 5 were the highest among the samples. Gelatinization viscosity was considerably affected by gamma irradiation and pH of the starch. Gamma irradiation of pH 2 adjusted starch showed the lowest peak viscosity and the best cooling stability among the tested samples . Therefore, the production of modified starch with low viscosity as well as with sufficient viscosity stability seems feasible by controlling the pH of the starch and gamma irrdiation.

• Korean Journal of Human Ecology
• /
• v.3 no.1
• /
• pp.88-99
• /
• 2000

This study was perfomed to search for how properties of the starch viscosity appear in different qualities, when acetic acid is added. For this study, corn starch which belongs to A-type. Potato starch to B-type. and sweet potato starch to C-type were chosen as an experimental material. which was added to acetic acid controlled as pH 4.0, 4.5, and 5.0 at the time of before and after heating. After that, the viscosity properties of each starch was analyzed using Amylogram and Brookfield viscometer. As a result. the viscosity was shown high in an order of potato. sweet potato, and corn starch. According to addition of acetic acid. tile viscosity appeared to be low. The viscosity differences of before and after heating when the acid is added were shown as follows : Amylogram shows that the lower the pH is. the lower the viscosity is when the acid is added before-heating. In case the acid is added before-heating, gelatinization temperature, consistency and setback was increased. but breakdown decreased. In case the acid is added after-heating, the viscosity goes down at soon as it is added meanwhile consistency and setback was decreased. but breakdown increased. Such properties of the viscosity show a conspicuous variation in an order of potato. sweet Potato. and corn starch. Brookrield viscometer shows that the lower the apparent viscosity is. the lower pH is at the time of before-heating when the acid is added. In case of after-heating, when the acid is added. the apparent viscosity shows a higher inclination than that of before-heating in corn starch and sweet potato starch.

• Korean Journal of Food Science and Technology
• /
• v.38 no.3
• /
• pp.378-384
• /
• 2006

Intrinsic viscosity of starch irradiated with Co-60 (0.25-9.1 kGy) significantly decreased, and swelling power and solubility measured at $80^{\circ}C$ linearly increased with increasing irradiated dose. Radiation treatment up to 1 kGy increased amylose content of starch. Water-binding capacity increased rapidly up to 3 kGy. Peak viscosity of irradiated starches by Rapid visco Analyser and Visco/amylo/Graph indicated that the decrease in peak viscosity was dose-dependent. Gamma irradiation showed no effect on endothermic temperatures of irradiated starches, but decreased endothermic enthalpy with increasing dose level. Viscosity of starch autoclaved at $120^{\circ}C$ and air-dried significantly decreased with increasing irradiation dose. Resistant starch content slightly decreased upon irradiation.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.8 no.1
• /
• pp.27-31
• /
• 2002

In this study, the physical properties of starch adhesive by temperature in carrier and main part for the Stain-Hall method were analyzed. The temperatures of starch solutions in carrier part were inversely proportional to the viscosities. The viscosities of starch solutions were maintained similarly if 2nd temperatures were same independent on the those of the 1st temperatures in carrier part. the starch solutions showed similar viscosities in all range except the viscosity of the solutions in $30^{\circ}C\;and\;40^{\circ}C$. The viscosities of starch adhesives in main part were in proportion to those of starch solutions in carrier part. The viscosities of starch adhesives in main part were maintained similarly if 2nd temperatures in carrier part were same. The viscosities of starch adhesives in main part were low when the ultimate temperature of starch solutions in carrier part were high.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.4
• /
• pp.9-15
• /
• 2013

An oxidized starch ester was prepared and used for surface sizing. Esterification of starch decreased both Brookfield viscosity and Brabender viscosity substantially even though the solids level was increased by 2% from 14% to 16%. Surface sizing with the esterified starch gave better performance in tensile strength, stiffness and compressive strength than surface sizing with oxidized starch in the laboratory. Advantages in strength improvement, however, were not obtained when it was applied in commercial papermaking process. This was attributed to the fact that the influence of starch types has been nullified by high pressure penetration that occurs in the commercial papermaking process. Drying energy consumption, however, decreased by 3.3% by substituting the low solids oxidized starch with a high solids starch ester.

• Food Science and Biotechnology
• /
• v.18 no.1
• /
• pp.118-123
• /
• 2009

In order to find out the effect of low level of starch acetylation on physicochemical properties of potato starch, amylose content, digestibility of raw and gelatinized starch, thermal properties, pasting properties, and the swelling power of native and acetylated potato starches were measured. The amylose content was significantly lower in acetylated starch than in their counterpart native starches. Though a tendency in the decrease in digestibility of raw starch was observed with starch acetylation, acetylation did not alter the proportion of readily digestible starch (RDS), slowly digestible starch (SDS), and resistant starch (RS) of both raw and gelatinized potato starches. No clear increase in the swelling power was observed, however, the peak and onset gelatinization temperatures and the enthalpy required for starch gelatinization decreased with starch acetylation. Peak and breakdown viscosities were reduced due to acetylation of potato starch while final viscosity and set back were increased.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.3
• /
• pp.436-442
• /
• 1997

Corn starch was extruded under relatively low shear, high moisture, and low temperature. Puffing of corn starch dough was induced by injecting $CO_2$gas in the range from 0MPa to 0.09MPa. Piece density and compressive modulus for puffed corn starch were decreased by increasing the injection pressure to 0.07MPa, and increased above 0.07MPa. the microstructure of corn starch puffed with $CO_2$gas showed thick cell size, compared with those puffed with steam. RVA paste viscosity curves of corn starch puffed with $CO_2$had different patterns from those puffed with steam, probably resulted from partial gelatinization of starch. Water absorption and solubility were not significantly changed by $CO_2$injection pressure, but the average degree of polymerization was reduced by higher $CO_2$injection. The water absorption, water solubility, and the average degree of polymerization for corn starch puffed with $CO_2$were significantly lower than those puffed with steam.