• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.372-379
• /
• 2018

The improvement of $NO_x$ reduction by $Ag/{\gamma}-Al_2O_3$ with a hydrocarbon ($n-C_7H_6$) in the early state was investigated in a packed-bed dielectric barrier discharge plasma reactor. The results revealed that the combination of plasma with the catalyst enhanced $NO_x$ reduction efficiency at low operating temperatures, depending on the temperature and specific input energy. To sum up, the poor performance of the catalytic $NO_x$ reduction at low temperatures in the early stage before reaching thermochemical steady state can be greatly compensated for by using the atmospheric-pressure plasma generated in the catalyst bed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4756-4762
• /
• 2014

Damaged wind turbine blades are repaired conventionally using a hand lay-up method with epoxy, where the bonding strength is not high. Epoxy has poor curing characteristics at low temperatures. The infusion method with polyester was proposed. Infusion method is believed to distribute resin uniformly. Polyester is used because it hardens better than epoxy at low temperatures. At room temperature, the proposed method increased the bonding strength by 77.7% compared to the conventional method. Using the proposed method at 15 and $5^{\circ}C$, the bonding strength increased compared to the conventional method. This paper proposes a new method for repairing wind turbine blades, even at temperatures where the conventional method cannot be used because epoxy resin does not harden. The bonding strength of the proposed method at low temperatures is higher than that of the conventional method at room temperature.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.4
• /
• pp.305-311
• /
• 2015

Both low and high temperatures affect plant growth and development at whole plant level, tissue and even cell level through a variety of metabolic changes. Temperature stress is one of frequently occurring problems in greenhouse crops in summer and winter seasons due to the wide-spread year-round cultivation. In the present study, we investigated the extent of the inhibition of growth, macro-element uptake and soluble carbohydrate production, and the effect of extra-supply of minerals as a means of the recovery from temperature damage. Tomato plants were grown five different growth temperatures (15/8, 20/13, 28/21, 33/23 and $36/26^{\circ}C$), and extra-supply of minerals was composed of 1.5- and 2.0-fold stronger than the standard nutrition (1/2 strength of Hoagland's solution). Temperature stress significantly adversely affected tomato growth and mineral uptake, whereas soluble carbohydrate accumulation represented temperature-dependent response, more accumulation at low temperature and more consumption at high temperature. The soluble sugars in leaves and stems were mostly declined with the supply of extra-minerals at low and optimal temperatures, whereas remained unchanged at high temperature. The starch levels also remained unchanged or slightly decreased.

• Applied Chemistry for Engineering
• /
• v.33 no.1
• /
• pp.64-70
• /
• 2022

In this study, an experiment was performed by adding Sb during NH3-selective catalytic reduction (NH₃-SCR) while varying calcination temperatures from 400 to 700 ℃ to improve the low temperature denitrification efficiency of VWTi catalyst. As a result, VWSbTi(500) and VWSbTi(600) catalysts corresponding to Sb calcination temperatures of 500~600 ℃ showed the best denitrification performance at low temperatures below 300 ℃. BET, XRD, Raman, XPS, H₂-TPR, and NH₃-TPD analyses were performed In order to confirm physicochemical properties according to the calcination temperature. In the case of VWSbTi(500) and VWSbTi(600), an acid site increased with the generation of W=O species, and superb activity at low temperatures was exhibited due to the excellent redox characteristics and increase in electron density of tungsten. Furthermore, in the case of VWSbTi(700), as the crystalline V₂O₅ structure was formed, the denitrification efficiency decreased. Thus the optimum calcination temperature during Sb addition process was confirmed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.4
• /
• pp.345-351
• /
• 2011

Two feeding trials were conducted to investigate the optimum feeding rates in juvenile olive founder Paralichthys olivaceus fed practical expanded pellet(EP) containing 58.1% crude protein, 10.7% crude lipid, and 10.8% ash at low and high water temperatures. In the first experiment, triplicate groups of 15 fish with average weight of 7.7 g were fed at one of seven feeding rates(0, 1, 1.5, 2, 2.25, or 2.5% of body weight/day or to satiation) for 4 weeks at low water temperature. In the second experiment, quadruplicate groups of 20 fish with average weight of 5.5 g were fed at one of eight feeding rates(0, 3, 3.5, 4, 4.25, 4.5, or 4.75% of body weight/day or to satiation) for 4 weeks at high water temperature. Based on growth performance, we estimated that the optimum feeding rates for juvenile olive flounder were 1.97-2.51% and 4.82-6.36% of body weight/day at low and high water temperatures, respectively.

• Korean Journal of Medicinal Crop Science
• /
• v.20 no.3
• /
• pp.184-189
• /
• 2012

This study was carried out to have the basic and applied informations relating to increase the productivity and quality of ginseng. 2 years-old ginseng was cultivated under hydroponic culture with the controlled environment conditions in a greenhouse. Major growth characters and yields were investigated with two different temperatures and several growth stages. The plant height and stem diameter were higher at low temperature than those at high temperature. They were not clearly different with six different growth stages. The root length was not clearly different between two temperatures; however it was continuously grown from June until August. The root diameter was higher at low temperature than that at high temperature. It was rapidly increased from June until August. The length, width, and area of leaf were higher at low temperature than those at high temperature. The fresh and dry weights of different plant tissues were also heavier at low temperature than those at high temperature. The moisture content of ginseng root was continuously decreased from June until August. The yield of ginseng was higher at low temperature compared to that at high temperature. The cultivating conditions in hydroponic culture of ginseng, especially temperature, would be an important factor to have better growth and production.

• Ocean Science Journal
• /
• v.41 no.4
• /
• pp.227-234
• /
• 2006

Year-to-year variation of bottom cold waters around the Korea Strait was investigated based on bottom temperatures measured by submarine telephone cable between Pusan, Korea and Hamada, Japan from 1982 to 1992. The characteristics of bottom temperatures could be divided into three different groups: the Korean side, the middle, and the Japanese side. Temperature drops in summer appeared in all the three regions implying the intrusion of cold waters into the Korea Strait. Significant decreases in the Korean side were observed in 1983, 1986, 1990, 1991, and 1992 when bottom temperatures were high in the middle. In contrast, bottom temperatures significantly decreased in the middle in 1985, 1988, and 1989 when the temperature drops in the Korean side were relatively small. This tendency for a negative relationship was also shown in the second mode of an EOF analysis. In the years when bottom temperatures significantly decrease din the Korean side, the cold water along the east coast of Korea expanded offshore and its temperature was low. On the contrary, cold water in the southern region of the Ulleung Basin developed in the years when bottom temperatures decreased considerably in the middle.

• Journal of Astronomy and Space Sciences
• /
• v.34 no.2
• /
• pp.119-125
• /
• 2017

We retrieved rotational temperatures from emission lines of the OH airglow (8-3) band in the sky spectra of the Sloan digital sky survey (SDSS) for the period 2000-2014, as part of the astronomical observation project conducted at the Apache Point observatory ($32^{\circ}N$, $105^{\circ}W$). The SDSS temperatures show a typical seasonal variation of mesospheric temperature: low in summer and high in winter. We find that the temperatures respond to solar activity by as much as $1.2K{\pm}0.8K$ per 100 solar flux units, which is consistent with other studies in mid-latitude regions. After the seasonal variation and solar response were subtracted, the SDSS temperature is fairly constant over the 15 year period, unlike cooling trends suggested by some studies. This temperature analysis using SDSS spectra is a unique contribution to the global monitoring of climate change because the SDSS project was established for astronomical purposes and is independent from climate studies. The SDSS temperatures are also compared with mesospheric temperatures measured by the microwave limb sounder (MLS) instrument on board the Aura satellite and the differences are discussed.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.1469-1478
• /
• 2014

Use of acetonitrile in electrolytes promotes better operation of supercapacitors. Recent efforts show that electrolytes containing acetonitrile can also function in a wide range of operating temperatures. Therefore, this paper addresses the dielectric relaxation processes, structure and dynamic properties of the bulk acetonitrile at various temperatures. Systems of acetonitrile were modeled using canonical ensemble and simulated by employing Molecular Dynamics method. Results show that interactions among the molecules were correlated within a cut-off radius while parallel and anti-parallel arrangements are observed beyond this radius at relatively high and low temperatures respectively. Furthermore, effects of C-C-N and C-H bending modes were greatly appreciated on the power spectral density of time rate change of dipole-dipole correlations whereas frequency shifts were observed on all modes at the lowest temperature under consideration. Linear variations with temperature were depicted for reorientation times and self-diffusion coefficients. Shear viscosity was also computed with a good accuracy within a certain range of the temperature as well.

• Journal of the Korean Vacuum Society
• /
• v.2 no.4
• /
• pp.474-479
• /
• 1993

Submicron contact hole filling with aluminum alloys has been achieved with a multistep metallization method, which utilizes a metal " flow" or self-diffusion process at elevated temperatures after the metal was sputter-deposited. A multi-chamber, modular sputtering system was employed to deposit aluminum alloys and subsequently to anneal the deposited metal films under vacuum at high temperatures. The film were deposited on 200 mm wafers with planar, dc magnetron sputtering sources without anysubstrate bias. The basic process steps studied for the multistep metallization include an initial layer deposition at low temperatures less than $100^{\circ}C$, and an annealin gstep at elevated temperatures, between 450 and $550^{\circ}C$. The degree of planarization or step coverage was dependent strongly upon the temperature and time of the flow step and complete filling of the submicron contacts with aluminum alloys was achieved. Responsible mechanisms for the enhancement in step coverge and factros determining uniform and reproducible flow of aluminum alloys during the high temperauture step are discussed.discussed.