• Journal of Life Science
• /
• v.21 no.6
• /
• pp.819-828
• /
• 2011

To inspect norovirus contamination of groundwater in south eastern areas of Korea, a systematic survey of groundwater in Busan, Ulsan, and Gyeongsangnam-do was performed for two years from 2009 to 2010. For this purpose, we first optimized the nested reverse transcription-PCR condition by designing two sets of primers for the detection of norovirus genogroups, GI and GII. Of 145 samples, 21 (25.9%) and 15 (23.4%) were norovirus positive in the dry season (April to June) and wet season (July to August), respectively. The detection frequencies of norovirus in Busan, Ulsan, and Gyeongsangnam-do were 15%, 7%, and 32%, respectively, reflecting a geographical difference in their distribution. The GI and GII isolates were 5 and 31, respectively, indicating the prevalence of GII in the tested areas. According to phylogenetic analysis of their nucleotide sequences, all of the GI isolates were identified to genotype GI.5 whilst the GII isolates were divided into two genotypes, GII.3 and GII.4. Neither physical-chemical parameters such as pH, temperature, oxidation-reduction potential, and dissolved oxygen, nor microbial indicators of water quality such as total bacteria, total coliforms, and Escherichia coli were statistically correlated with contamination of norovirus in the groundwater. Interestingly, however, the presence of norovirus was closely correlated with low turbidity (<0.50 NTU). The present study suggests that periodical monitoring of norovirus in groundwater is necessary to prevent epidemic waterborne diseases and to secure better sanitary conditions for public health.

• Journal of Life Science
• /
• v.19 no.12
• /
• pp.1836-1840
• /
• 2009

Recently, hydroxymethylfurfrual (HMF) has been highlighted as a key intermediate for the production of liquid biofuels and other valuable compounds. We used sesame roots as a biocatalyst to synthesize HMF using flask cultures. The synthesis of HMF was identified by GC-mass analysis. The highest root growth was observed in cultures with 1.0 mg/l NAA at $30^{\circ}C$, while root growth was not found in those without NAA treatment. When silver nitrate ($AgNO_3$) was added, the root growth was greatest in those treated with 0.5 mg/l $AgNO_3$ and cultured at $30^{\circ}C$. In the case of HMF synthesis, its highest yield was obtained in those treated with 0.5 mg/l NAA at $25^{\circ}C$, but low HMF was detected in those treated without naphthaleneacetic acid (NAA). The addition of $AgNO_$ to the culture medium showed a 8-10% reduction in HMF yield compared to that of the control, indicating its inhibitory effect on the synthesis of HMF. On the whole, an optimal culture temperature for HMF synthesis seemed to be between $25-30^{\circ}C$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.15
• /
• pp.145-153
• /
• 1974

Five different levels of Ethephon were treated on tobacco cultivar yellow Special A and Coker and harvested for curing. Changes in dehydration properties, yellowing, chlorophyll, nicotine, sugar and starch contents during the processes of curing were studied in order to justify feasibility of adoption an idea of 3-stage-curing method instead of the 5-stage. Ethephon-treated-tobacco leaves showed marked degradation of chlorophyll, greater dehydration and greater reduction in nicotine contents while little change in either sugar, starch and other chemical components. They showed also shorter hours of curing period allowing possible curing response at a relatively low temperature than those without treatment. Thus they undergo only 3 stages of flue-curing processes, yellowing, calor-fixing and vein-drying, and need 72 hours to finish curing, but the ordinary leaves need 100 hours for it.

• Journal of Bio-Environment Control
• /
• v.20 no.4
• /
• pp.283-289
• /
• 2011

This study was conducted to examine the effects of defoliation treatment on the growth and yield of strawberry ($Fragaria{\times}ananassa$ cv. Maehyang and Seolhyang) during nursery period. Leaves of strawberry plantlet had been removed except two, three and four fully expanded leaves until planting date. As the intensity of defoliation was strong, the petiole length was reduced and overgrowth of strawberry plantlet was suppressed. Outer diameter of crown in defoliation treatments significantly decreased but inner diameter of crown was not significant. Number of primary roots of the 3 leaves or 4 leaves defoliation treatment generally tended to increase, but there was not significantly different among treatments. Fresh weight and leaf area in the defoliation treatments significantly decreased and the root weight were higher in partial 3 leaves or 4 leaves defoliation treatment but was not significantly different among treatments. Because T/R ratio decreased significantly as growth inhibition of above-ground part compared to underground part, it is considered easy to take rooting after plantlet plating. As the intensity of defoliation was strong, chlorophyll contents tended to decrease significantly. Reduction of the endogenous nitrogen by defoliation effectively led to promote floral differentiation at low temperature and short day condition. This promoted timing of budding and flowering and also induced uniform flowering after plantlet planting. Marketable fruit yield of 3 leaves defoliation treatment tended to be higher than the control.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.1
• /
• pp.13-22
• /
• 2001

This paper presents three dimensional structure of RF packages and the improvement effect of its electrical characteristics when implementing RF transceivers. We divided RF modules into several subunits following each subunit function based on the partitioning algorithm which suggests a method of three dimension stacking interconnection, PAA(pad area array) interconnection and stacking of three dimensional RF package structures. 224MHz ITS(Intelligent Transportation System) RF module subdivided into subunits of functional blocks of a receiver(RX), a transmitter(TX), a phase locked loop(PLL) and power(PWR) unit, simultaneously meeting the requirements of impedance characteristic and system stability. Each sub­functional unit has its own frequency region of 224MHz, 21.4MHz, and 450KHz~DC. The signal gain of receiver and transmitter unit showed 18.9㏈, 23.9㏈. PLL and PWR modules also provided stable phase locking, constant voltages which agree with design specifications and maximize their characteristics. The RF module of three dimension stacking structure showed $48cm^3$, 76.9％ reduction in volume and 4.8cm, 28.4％ in net length, 41.8$^{\circ}C$, 37% in maximum operating temperature, respectively. We have found that three dimensional PAA package structure is able to produce high speed, high density, low power characteristics and to improve its functional characteristics by subdividing RF modules according to the subunit function and the operating frequency, and the features of physical volume, electrical characteristics, and thermal conditions compared to two dimensional RF circuit modules.

• Clean Technology
• /
• v.22 no.2
• /
• pp.114-121
• /
• 2016

In this studies, SCR reaction activity and SO₂ durability enhancement study on manufacturing conditions of the V/TiO₂ catalyst was carried out for the removal of nitrogen oxides generated in the combustion furnace. The catalysts are characterized by XPS, Raman, H₂-TPR and SO₂-TPD. When the vanadium was contained of 2 wt%, it showed excellent SO₂ durability and catalytic activity. and When the tungsten is added as a promotor, the enhancement of reducing ability at a low temperature and reduction of SO₂ adsorption capacity improved the reaction activity and SO₂ durability. V/W/TiO₂ are prepared by the lower pH of vanadium solution, vanadium was highly dispersed on the surface and inhibited the formation of crystalline V₂O₅. in addition, it was confirmed that this catalyst can be used as excellent resistance to high concentration of CO in the combustion furnace.

• Journal of the Korean Electrochemical Society
• /
• v.8 no.2
• /
• pp.82-87
• /
• 2005

The cathode material, $LiNi_{0.5}Mn_{1.5}O_4$, for high voltage applications of Li-ion batteries exhibits impurity phases due to oxygen deficiency during the high temperature heat treatment. The impurity phase reduces the electrochemical properties of the electrode since the deficiency spinel structure disturbs the lithium ion intercalation and deintercalation. In this study, Cr-substituted $LiNi_{0.5-x}Mn_{1.5}Cr_xO_4(0{\leq}x{\leq}0.05)$ powders are synthesized by a sol-gel method in order to reduce the amount of the impurity phases in the $LiNi_{0.5-x}Mn_{1.5}Cr_xO_4$. Thermal analysis of the cathode material shows that the $LiNi_{0.5}Mn_{1.5}O_4$ without Cr substitution looses $2\%$ of its weight due to oxygen deficiency but the amount of weight loss is diminished when Cr is substituted. XRD analysis also supports the reduction of the impurity phases in the cathode after chromium substitution, suggesting that the improvement of the electrochemical properties such as the capacity retention and electrochemical stability are attributed to the low content of impurity phases in the Cr-substituted $LiNi_{0.5-x}Mn_{1.5}Cr_xO_4.$

• Journal of the Korean Society of Radiology
• /
• v.12 no.6
• /
• pp.713-718
• /
• 2018

In many previous studies, monte carlo simulation is used to produce lead-free shielding sheet, and the possibility of radiation shielding capability and weight reduction is presented. But it is difficult to simulation for binder and micro-pores because of In fact it does not provide sufficient information necessary for the commercialization process. Therefore, in this paper, the results of radiation shielding capability corresponding to filling factor was presented by using the screen printing method to provide information on gel-paste required for the commercialization process. In this study, the geometric setup for evaluate of radiation shielding ability was designed to comply with IEC 61331-1:2014 and KS A 4025. In addition, radiation irradiation conditions were 100 kVp filtered with 2.0 mmAl total filtration was applied according to KS A 4021 standard. In this study, Pb $1270{\mu}m$, $BaSO_4$ $3035{\mu}m$, $Bi_2O_3$ $1849{\mu}m$ and $WO_3$ $2631{\mu}m$ were analyzed based on ten value layer. Additionally, the filling factor was analyzed as $BaSO_4$ 38.6%, $Bi_2O_3$ 27.1%, $WO_3$ 30.15%. However, in the case of applying low-temperature high-pressure molding in the future, it is expected that the radiation shielding capability can be sufficiently improved by reducing the porosity while increasing the filling factor.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.3
• /
• pp.240-251
• /
• 2019

This study examined the manufacturing technology used for the flat iron axes excavated from Ulsan Hadae. Their microstructures were analyzed using metallurgical methods. In addition, a variety of manufacturing technologies were examined and compared using existing research materials on flat iron axes. As a result of analyzing ten flat iron axes, which were excavated in the order that they were laid out in a row in one of the wooden coffin tombs at Ulsan Hadae, Tomb No. 44, it was possible to classify the flat iron axe manufacturing technology and system into three types: 'pure iron - shape processing', 'pure iron - shape processing - carburizing', and 'pure iron - shape processing - carburizing - decarburizing.' All of the flat iron axes were produced by forging, and most of them were made by beating the pure iron into their shapes. In particular, a number of the flat iron axes were reinforced through a carburizing process after shaping the iron. This appears as steel products forming the basis of the steel industry at the time were commonly used as an intermediary material or currency. On the other hand, it was commonly found in all samples that the hardening was not performed after shaping or carburizing. Since the microstructure of the flat iron axes made of pure iron contained a large number of impure inclusions and the result of analyzing the components of the non-metal inclusions showed characteristics of slag which contains a mixture of glass phase and wustite, it is possible that low-temperature reduction was used in the refining process.

• Ocean and Polar Research
• /
• v.45 no.3
• /
• pp.141-153
• /
• 2023

Biological pump processes generated by diatom production in the surface water of the Southern Ocean play an important role in exchanging CO₂ gas between the atmosphere and ocean. In this study, the biogenic opal content of the sediments was measured to elucidate the variation in the primary production of diatoms in the surface water of the Southern Ocean since the last glacial period. A piston core (COR-1bPC) was collected from the Conrad Rise, which is located in the Indian sector of the Southern Ocean. The sediments were mainly composed of siliceous ooze, and sediment lightness increased and magnetic susceptibility decreased in an upward direction. The biogenic opal content was low (38.9%) during the last glacial period and high (73.4%) during the Holocene, showing a similar variation to that of Antarctic ice core ΔT and CO₂ concentration. In addition, the variation of biogenic opal content in core COR-1bPC is consistent with previous results reported in the Antarctic Zone, south of the Antarctic Polar Front, in the Southern Ocean. The glacial-interglacial biogenic opal production was influenced by the extent of sea ice coverage and degree of water column stability. During the last glacial period, the diatom production was reduced due to the penetration of light being limited in the euphotic zone by the extended sea ice coverage caused by the lowered seawater temperature. In addition, the formation of a strong thermocline in more extensive areas of sea ice coverage led to stronger water column stability, resulting in reduced diatom production due to the reduction in the supply of nutrient-rich subsurface water caused by a decrease in upwelling intensity. Under such environmental circumstances, diatom productivity decreased in the Antarctic Zone during the last glacial period, but the biogenic opal content increased rapidly under warming conditions with the onset of deglaciation.