• 보존과학연구
• /
• s.22
• /
• pp.53-79
• /
• 2001

The scientific analysis and provenance study of potteries excavated from kiln site at Gyeongsang Nam-do were carried out using XRD, ICP-AES and NAA. We can summary the following Result :1. As a result of XRD analysis, it showed that soft potteries consisted of quartz, feldspar and clay minerals while hard potteries consisted of high temperature crystals such as mullite, tridymite, cristobalite.In case of firing temperature which are determined by XRD, potteries consisted of quartz, feldspar and clay mineral had very low firing temperature. While potteries having only cristobalite ranged above $1200^{\circ}C$.2. As a result of correlation analysis using trace element, the selected characteristic elements which was able to distinguish from each kiln site was Sm, Cs, Sc, Eu, Hf.3. Discriminant analytical showed that each kiln site were classified into 4-gruops;Kimhaeci Daesungdong, Hamangun Myosari, Changyounggun Yochori and one group mixed KimhaeciGuosandong, Kimhaeci Samgyeri. This suggests that there are no correlations between the raw materials used in each kiln sites except Kimhaeci Guosandong, Kimhaeci Samgyeri.

• 보존과학연구
• /
• s.23
• /
• pp.5-39
• /
• 2002

The scientific analysis and provenance study of potteries excavated from kiln sites at Jeonla Nam. Buk-do were carried out using XRD,ICP-AES and NAA. We can summarize the following consequence. First, as a result of XRD analysis, it showed that soft potteries consist of quartz, feldspar and clay minerals while hard potteries consist of high temperature crystals such as mullite, tridymite, cristobalite. In case of firing temperature which are determined by crystals using XRD, potteries are composed of quartz, feldspar and clay minerals had very low firing temperature. While potteries having only cristobalite ranged above$1200^{\circ}C$. Second, as a result of correlation analysis using trace element, the selected characteristic elements which was able to distinguish from each kiln site was Ce, Lu, Cs, Sc, Eu. Third, discriminant analytical results showed that kiln site of the Jeonla Namdo were classified into five groups and that of the Jeolna Buk-do into three groups. This suggests that there are no correlations between the raw materials used in each kiln sites.

• Journal of Conservation Science
• /
• v.30 no.3
• /
• pp.249-261
• /
• 2014

This study aims to examine production technique of white wares from the Guyre-2ri 1st and 2nd kiln sites, Wonju, Gangwon Province and characteristics of the used materials, and to find a correlation among materials of the excavated white wares. X-ray fluorescence sequential spectroscopy(XRF), X-ray diffraction(XRD), Dilatometer and Inductively coupled plasma mass spectrometry(ICP-MS), Inductively coupled plasma automic emission spectrometer(ICP-AES) were applied to determine the chemical composition, crystalline phase of samples, firing temperatures, trace elements and rare earth elements. White wares from the Guyre-2ri kiln sites contained high contents of coloring oxides and fluxes. Though firing temperature of each sample was different, they were mostly fired at a temperature below $1200^{\circ}C$ and some of them experienced a low temperature of $1000^{\circ}C{\pm}20^{\circ}C$ and a high temperature above $1200^{\circ}C$. When analyzing body crystalline phases of the white wares using the XRD method, quartz and mullite were extracted from all the samples, and the proportions were similar to each other. When analyzing the excavated white wares using the Seger formula, also, all the samples showed similar clay sources and production techniques. Moreover, the white wares were made of host rocks of the same geological origin, according to the result of rare earth elements analysis.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.993-996
• /
• 2001

In the composition of 0.16BaO-0.15(Nd$\_$0.87/,Bi$\_$0.13/)$_2$O$_3$-0.69TiO$_2$$.$Glass [EG-2782] 3wt% addition sintered at 1080$^{\circ}C$, we could obtained microwave properties of dielectric constant $\varepsilon$$\_$r/= 80.1, quality factor Q ${\times}$ f = 810 (at 3.5 GHz]) and temperature coefficient of resonant frequency $\tau$$\_$f/ = -1.3 [ppm/$^{\circ}C$]

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.59-60
• /
• 2011

The purpose of this study is to produce the low-carbon eco-friendly inorganic composite at room temperature by an alkali accelerator without firing process at high temperature, and complement the problem of previous studies, the deterioration in strength caused by cracking, with incorporation of PVA fibers. Results of reviewing the changes in the strength properties of PVA showed that test body mixed with PVA fibers had the superiority in strength expression.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.6
• /
• pp.249-252
• /
• 2011

We investigated the low firing of $Li_2CO_3$ added $0.2Pb(Mg_{1/3}Nb_{2/3})O_3$ - 0.3Pb($Fe_{1/2}Nb_{1/2}$) - $0.5Pb(Zr_{0.475}Ti_{0.525})O_3$ (PMN-PFN-PZT) ceramics and multilayer actuators (MLAs) using Ag inner electrodes. It was found that 0.1 wt% $Li_2CO_3$ was quite effective in lowering the sintering temperature of PMN-PFN-PZT ceramics from $1,100^{\circ}C$ down to $900^{\circ}C$ without deteriorating their piezoelectric ceramics ($d_{33}$ = 425 pC/N and $k_p$ = 61.9%). However, excess $Li_2CO_3$ up to 0.3 wt% brings about unwanted problems such as the formation of a $LiPbO_2$ secondary phase and subsequent degradation in the piezoelectric properties. Using 0.1 wt% $Li_2CO_3$ added PMN-PFN-PZT ceramics, MLAs with Ag inner electrodes were successfully fabricated, resulting in a normalized strain of 580 pm/V at an electric field of 1.5 kV/mm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.995-999
• /
• 2007

The lead zirconate titanate (PZT) powders were synthesized to make the piezoelectric ceramics in low temperature as low as $900^{\circ}C$. To investigate the influence of additives on sintering of PZT, two kinds of sintering aids were made as follows; $wB_2O_3-xBi_2O_3-zCuO$and LiBiO2-CuO. The sintering aid, $1{\sim}3$ wt.% $LiBiO_2-CuO$, was added into these PZT powders and the specimens were fired at temperature in the range of $800{\sim}1200^{\circ}C$. The highest density was shown in the specimen with 1 wt.% $LiBiO_2-CuO$ as additive at temperature of $900^{\circ}C$. The sintered specimen were analyzed by X-ray diffraction(XRD) and scanning electron microscopy (SEM) was utilized to observe the microstructure, especially the densified morphology of specimens. In the XRD pattern, the well-crystallized PZT phase could be obtained in consequence of firing at $900^{\circ}C$. The scanning electron microscopy(SEM) was utilized to observe the structure of specimens after firing at $900^{\circ}C$. The densified perovskite structure of $PbZrTiO_3$ could be obtained by sintering at temperature as low as $900^{\circ}C$. The high sinterability of PZT ceramics was attributed to the low formation temperature of the liquid phase of additives.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.510-514
• /
• 1997

The thin film that is electrically conductive and optically transparent is called conductive transparent thin film. ITO(Indium-Tin Oxide) which is a kind of conductive transparent thin film has been widely used in solar cell, transparent electrical heater, selective optical filter, FDP(Flat Display Panel) such as LCD(Liquid Crystal Display), PDP(Plasma Display Panel) and so on. Especially in PDP, ITO films is used as a transparent electrode in order to maintain discharge and decrease consumption power through the improvement of cell structure. In this study, we prepared ITO by reactive r.f. sputtering with indium-tin(Sn 10wt%) alloy target instead of indium-tin oxide target. The ITO films deposited at low temperature 15$0^{\circ}C$ and 8% $O_2$. Partial pressure showed about 3.6 Ω/$\square$. At the end of firing, the resistance of ITO was decreased, the optical transparence was improved above 90%.

• Journal of the Korean Ceramic Society
• /
• v.52 no.5
• /
• pp.338-343
• /
• 2015

To prevent an interfacial reaction between the anode and the electrolyte layer during the conventional high-temperature co-firing process, an anode-supported type cell with a thin-film electrolyte was fabricated by low-temperature ceramic thick film coating process. Ni-GDC cermet composite was used as the anode material and YSZ was used as the electrolyte material. Open circuit voltage and maximum power density were found to strongly depend on the surface uniformity of the anode functional layer. By optimizing the microstructure of the anode functional layer, the open circuit voltage and maximum powder density of the cell increased to 1.11 V and $1.35W/cm^2$, respectively, at $750^{\circ}C$. When a GDC barrier layer was applied between the YSZ electrolyte and the LSCF cathode, the cell showed good stability, with almost no degradation up to 100 h. Anode-supported type SOFCs with high performance and good stability were fabricated using a coating process.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.698-701
• /
• 2011

Over recent several years, researches for the less sensitive gun propellant development have been carried out with promising the product of propellants which have temperature independent characteristics using the new energetic plasticizing mixture as Di-nitro-diaza-alkanes. During this study, the promising propellant formulation having temperature ballistic properties as well as better behaviors concerning the cold brittleness of the materials was confirmed by results in tests of a closed bomb and 40mm Gun firing. On-going research on the optimized shape, formulation and processes of the propellant is progressing. From now on it should be done present study to establish the better composition and processes.