• Journal of the Korean Ceramic Society
• /
• v.40 no.6
• /
• pp.577-582
• /
• 2003

BaTiO$_3$ fine powders were synthesized by hydrothermal process from peroxo-coprecipitate precursors. The peroxo-coprecipitates were obtained by addition of the BaCl$_2$, TiCl$_4$, and $H_2O$$_2$ aqueous solution to an ammonium solution. Hydrothermal reaction was conducted at various reaction temperatures, times and pH ranges. Unlike the conventional hydrothermal synthesis which needs highly alkaline condition over pH 13 with KOH or NaOH, the present method offered well-developed crystalline (perovskite) BaTiO$_3$ powders synthesized below pH 12 with use of ammonium solution. It was found that the phase-pure fine powders were formed at temperatures as low as 11$0^{\circ}C$ and the properties of the powders synthesized over 13$0^{\circ}C$ were almost same regardless of the reaction time. BET surface area of the prepared powder was as high as 76 $m^2$/g and the calculated particle (particulate) size was below 20 nm. The ultrafine particulates formed weak agglomerates. The microstructure and dielectric properties of BaTiO$_3$ ceramics sintered at the temperature range of 1150~125$0^{\circ}C$ were evaluated.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.6
• /
• pp.63-70
• /
• 2011

A bicycle is different from vehicles in the structure that a rider is fully exposed to the surrounding environment. Therefore, it needs to make use of prior information about local weather, air quality, trail road condition. Moreover, since it depends on human power for moving, it should acquire route property such as hill slope, winding, and road surface to improve its efficiency in everyday use. Recent mobile applications which are to be used during bicycle riding let us aware of the necessity of development of intelligent bicycles. This study aims to develop a riding state (up-hill, down-hill, accelerating, braking) recognition algorithm using a low-power wrist watch type embedded system which has 3-axis accelerometer and wireless communication capability. The developed algorithm was applied to 19 experimental riding data and showed more than 95% of correct recognition over 83.3% of the total dataset. The altitude and temperature sensor also in the embedded system mounted on the bicycle is being used to improve the accuracy of the algorithm. The developed riding state recognition algorithm is expected to be a platform technology for intelligent bicycle interface system.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.3
• /
• pp.150-155
• /
• 1999

The Electrochemical stabilities of the Brewer-Engel type intermetallic compounds of Co-Mo $(35 wt\%)$ and Ni-Mo$(35 wt\%)$ manufactured by the arc-melting method for the hydrogen electrode of $H_2-O_2$ alkaline fuel cell were investigated. Effects of temperature and concentration on the electrochemical behavior of the electrodes in the $80^{\circ}C$ 6 N KOH solution deaerated with $N_2$ gas were studied by electrochemical methods. The effect of overpotential on the electrochemical stabilities of Co-Mo and Ni-Mo intermetallic compounds was also discussed under the normal operation condition of AFC. It was shown that Co-Mo electrode had lower electrochemical stability as compared to Ni-Mo. In the case of Co-Mo electrode, a simultaneous dissolution of cobalt and molybdenum has occurred at low anodic overpotential form equilibrium hydrogen electrode potential, but the dissolution of cobalt was serious, and Co(OH)l layer on the electrode surface formed at the high anodic overpotential. In contrast the Ni-Mo electrode had high electrochemical stability because formation of the dense and thin protective $Ni(OH)_2$ layer prevented the dissolution of molybdenum.

• Journal of Korean Society of Forest Science
• /
• v.99 no.1
• /
• pp.16-23
• /
• 2010

Experiments were performed for investigate the immune activities on human B and T cell growth and secretion of their cytokines. Also, antibodies in serum were investigated in female ICR mouse by feeding the extracts of Acer mono at dose of 30 and 100 mg/mL of one day orally for 15 days. The cytotoxicity of the samples on normal human cell (HEL299) was below 24.15% in adding the all extracts. Both human immune B and T cells were increased up to about 40% by the high pressure extraction process. The secretion of cytokines (IL-6, TNF-${\alpha}$) on human B and T cells were increased up to 20-50% by adding the high pressure extraction process compare to the hot water extraction process. Also, total serum IgG levels increased by feeding Acer mono extacts. It can be conclude that optimum condition for efficient extraction of Acer mono as functional materials is solvent extraction process using water with high pressure at below $100^{\circ}CA$ than typical process.

• Journal of Bio-Environment Control
• /
• v.16 no.4
• /
• pp.415-419
• /
• 2007

This study was conducted to compare the storability of some sprout vegetables; alfalfa, broccoli, radish, red-cabbage, and red-radish, packed with 50 low density polyethylene (LDPE) film in MA storage. Most of all 5 different sprout vegetable crops maintained the fresh weight higher than 99% until 10 days storage at 2 and $8^{\circ}C$. The carbon dioxide concentration in packages was higher at 8 than at $2^{\circ}C$. It was higher in radish and red-radish sprouts than other crops. As the oxygen concentration showed opposite trends to carbon dioxide, that of radish and red-radish sprouts decreased more than 3% after 3 days in 8 storage. Ethylene concentration in the packages of alfalfa was 0.1 ppm, significantly higher than other four crops with less than 1.0 ppm. Temperature treatment, however, did not influence the ethylene concentration in packages. The radish and red-radish sprouts, with lowest oxygen concentration in package, showed lowest off-flavor compared to the others. The visual quality of these sprouts in packages showed higher at $2^{\circ}C\;than\;at\;8^{\circ}C$ and was maintained the highest in radish sprouts, followed by red-radish, broccoli, red-cabbage, and alfalfa sprouts in that order. In conclusion, as the sprout vegetables have different shelf-life, of which radish was $4{\sim}5$ days longer than that of alfalfa the distributed condition of sprout vegetables should be differently controlled according to kinds of crops.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.255-261
• /
• 2016

The present study was conducted to characterize physiological responses of aerial part according to soil water stresses in 'Mihong' peach trees. Discolorations, wilting and falling of leaves were observed in chronological order as response for waterlogging and no irrigation and the phenomena started from basal to end of shoots. Shoot growth in elongation and thickness decreased and fallen leaves were severe in waterlogged trees. Function of water uptake by roots and photosynthesis and leaf respiration decreased by waterlogging. Leaf chlorophyll contents decreased in both treatments. In waterlogging treatment, decrease of chlorophyll was observed in normal leaves with waterlogging using light microscopy. Starch content was lower in both treatment and carbohydrate content was lower in root with waterlogging. These results demonstrated that waterlogging weakened the function of soil water uptake and movement and decreased photosynthesis and fallen leaves. Finally the peach trees would wither or suffer low temperature damage through the shortage of reserve accumulations. We suggested that waterlogging damage in peach trees could be reduced to take notice of irrigation and install drainage facility to improve soil condition.

• Journal of Forest and Environmental Science
• /
• v.32 no.4
• /
• pp.353-366
• /
• 2016

The effect of different environmental conditions and altitudes on the growth and reproductive characteristics in 12 teak plantations at 4 different blocks (Cauvery canal bank, Topslip and Parambikulam (Tamil Nadu), Nilambur and Wayanad (Kerala) of Southern India was investigated. The annual rainfall and mean monthly temperature of the study areas varied significantly from 1390 to 3188 mm and 16 to $38^{\circ}C$ respectively. The teak plantations in Cauvery canal bank which grow in continuous moisture condition (8-10 months) retain the leaf for longer period due to moisture resulting continuous supply of photosynthates leads to fast and outstanding growth. The girth at breast height (GBH) of 34-years-old tree in canal area was similar to that of 40 to 49-years-old trees in other locations, indicating that teak plantations with regular watering and silvicultural practices may be harvested at the age of 30 years. The leaf fall, flowering and fruiting showed significant variations in different teak plantations due to environmental factors and altitudes. It was found that increase of rainfall enhances number of flowers in the inflorescence in teak. Tholpatty (block-IV) showed more flowering in a inflorescence (3,734-3,744) compared to other plantations (1,678-3,307). Flowering in Nilambur and Wayanad coincided with heavy rainfall resulting low fruitset (1.1-2.3%) probably heavy rainfall ensuing restriction of pollinators for effective pollination. On the other hand, flowering in Cauvery canal bank (Block-I) was not coincided with high rainfall exhibited high fruitset (2-3%). About 66 to 76% of the fruits in different plantations were empty, and it is one of the main reasons for poor germination in teak. The seeds of Topslip and Parambikulam (Block-II) showed higher seed weight, maximum seed filling and good germination indicating that the environmental factors and altitude play significant role in fruit setting and seed filling in teak. In addition, the teak plantations in Topslip and Parambikulam showed good growth suggesting that plantations in the altitude range of approximately 550-700 m may be suitable for converting into seed production areas for production of quality seeds.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.257-257
• /
• 2017

Being producing and evaluating oat-chocolate were a major goal in this study. There were various steps to make oat-chocolate. First, oat was roasted with an optimum roasting-temperature. Second, discovered the best natural antioxidant to extend storage period and improve quality of goods. Third, developed processing goods and made an evaluation of quality properties. We selected optimum roasting condition of $160^{\circ}C$ for 15 min based on the acid value and the sensory characteristics such as color, taste, smell and overall preference of oat flour. As for natural antioxidants, we made use of 3 kinds of antioxidants (cactus, lavender and green tea) and two concentrations (0.5 and 1%). In investigating antioxidants, an acid value was significantly decreased as the antioxidants were added (p<0.05). Nothing was as low in acid value as a chocolate with 1 % lavender flour in 7 days. Findings showed the sensory characteristics of products containing antioxidants such as green tea and cactus, were higher than those of Cont. in 7 days. A product including 0.5% green tea marked the best sensory score among antioxidants. Compared cost among 3 antioxidants, green tea was the cheapest. In the end, 0.5% green tea was selected as an optimal antioxidant to make high-quality oat chocolate. We made an end product by mixing green tea (0.5%) and oat. With respect to Hunter's color L (whiteness), a (redness) and b (yellowness), as green tea added, L and a level showed an increasing tendency. However, an opposition result was expressed in b level. When compared pH value and total acidity, it was statistically identical between Cont. and product with 0.5% green tea (G-0.5). There was different acid value among specimens. The acid value of G-0.5 was lower than that of Cont. up to 7 days, resulting in lower acid value than a ready-made product (D-Co.). When we assessed the sensory characteristics, G-0.5 was higher than other specimens such as Cont. and ready-made products (D-Co. and H-Co.) up to 6 days after manufacture. Put previous findings together, the addition of 0.5% green tea increased an antioxidative effect as well as the sensory acceptability of oat-chocolate.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.58-58
• /
• 1999

The diamond films which can be applied to SOD (silicon-on-diamond) structure were deposited on Si(100) substrate using CO/H2 CH4/H2 source gases by microwave plasma chemical vapor deposition(MPCVD), and SOD structure have been fabricated by poly-silicon film deposited on the diamond/Si(100) structure y low pressure chemical vapor deposition(LPCVD). The phase of the diamond film, surface morpholog, and diamond/Si(100) interface were confirmed by X-ray diffraction(XRD), scanning electron microscopy(SEM), atomic force microscopy(AFM), and Raman spectroscopy. The dielectric constant, leakage current and resistivity as a function of temperature in films are investigated by C-V and I-V characteristics and four-point probe method. The high quality diamond films without amorphous carbon and non-diamond elements were formed on a Si(100), which could be obtained by CO/H2 and CH4/H2 concentration ratio of 15.3% and 1.5%, respectively. The (111) plane of diamond films was preferentially grown on the Si(100) substrate. The grain size of the films deposited by CO/H2 are gradually increased from 26nm to 36 nm as deposition times increased. The well developed cubo-octahedron 100 structure nd triangle shape 111 are mixed together and make smooth and even film surface. The surface roughness of the diamond films deposited by under the condition of CO/H2 and CH4/H2 concentration ratio of 15.3% and 1.5% were 1.86nm and 3.7 nm, respectively, and the diamond/Si(100) interface was uniform resistivity of the films deposited by CO/H2 concentration ratio of 15.3% are obtained 5.3, 1$\times$10-9 A/cm, 1 MV/cm2, and 7.2$\times$106 $\Omega$cm, respectively. In the case of the films deposited by CH4/H2 resistivity are 5.8, 1$\times$10-9 A/cm, 1 MV/cm, and 8.5$\times$106 $\Omega$cm, respectively. In this study, it is known that the diamond films deposited by using CO/H2 gas mixture as a carbon source are better thane these of CH4/H2 one.

• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.2
• /
• pp.87-96
• /
• 2017

In this study, 4 gases containing typical chlorinated volatile organic compounds (VOCs) were treated by ultraviolet (UV) irradiation. The typical chlorinated VOCs are dichloromethane (DCM), trichloromethane (TCM), carbon tetrachloride (CTC) and trichloroethylene (TCE). The removal efficiency (RE) and the products of chlorinated VOCs by UV irradiation are investigated. At this time, 2 types of background gas (air and nitrogen) were used to figure out the RE by photooxidation and photolysis. The specification of UV-lamp used in this study was low-pressure mercury lamp emitting wavelength of 185~254 nm. The experimental conditions were set as initial VOC concentration of $180{\pm}10ppm$, empty bed retention time (EBRT) of 53 s, temperature of $23{\pm}2^{\circ}C$ and relative humidity of $65{\pm}5%$. In the photolysis condition with nitrogen ($N_2$) as background gas, the averaged RE of the 4 types of chlorinated VOCs was about 24% higher than that with photooxidation; and the REs of VOCs except CTC were confirmed as >99%. The composition of off-gases after UV photooxidation in air was investigated and several intermediates from DCM, TCM and TCE were detected by GC/MS. Among them, phosgene which is a toxics was detected as an intermediate of TCM. In addition, the concentration of carbon dioxide ($CO_2$) in the off-gases was measured to calculate the mineralization rate (MR). With the photooxidation, TCE showed the highest RE (>99%) while MR was the lowest (17%); and the MR of DCM was the highest (86%). In addition, particulate matters (PM) in the off-gases was also detected and high concentrated $PM_{10}$ ($21,580{\mu}g{\cdot}m^{-3}$) and $PM_{2.5}$ ($6,346{\mu}g{\cdot}m^{-3}$) were detected in TCE off-gas. More than 99% of the chlorinated VOCs could be removed using UV254-185 nm lamp, while it is necessary to conduct further studies on the production and treatment of secondary pollutants.