• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.3
• /
• pp.211-222
• /
• 2020

The purpose of this study is to derive a plan to improve the standard of survey cost, which is a system for estimating survey cost operated by the National Geographic Information Institute. The current standard has not been revised significantly since the initial enactment. However, in the situation where the survey industry is getting worse, the actualization of the standard is an urgent task for training engineers and industrial development. In this study, in order to break the problems of the standard and to derive improvement plan, we analyzed the outline, basic characteristics, and history of the standard and compared it with similar domestic ones. We collected opinions from the government and the industry through a survey, and verified labor cost and overhead rates. The conclusions are as follows. First, it is necessary to complement standard for production rate that directly affects direct cost, and to compensate for the missing items in the direct cost. Second, when compared with cost standards in foreign countries and cadastre field, the labor cost in survey field was found to be very low and improvement is needed. Third, the overhead rates were assessed to be appropriate, and the problem of improper overhead design should be coped with by strengthening education and promotion. Fourth, it is necessary to consider the introduction of deliberation committee or standard market price system for rapid response to new technologies.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.3
• /
• pp.89-96
• /
• 2018

This study derived big issues in overseas construction through big data analysis. To derive big issues in overseas construction, candidate groups of big issues were identified through big data analysis targeting 53,759 issues including 39,436 issues from major portal sites, 10,387 issues from daily newspapers, and 336 issues in construction magazines from Oct. 1, 2016 to Sep. 30, 2017. The main results are as follows: First, the main issues of overseas construction for the past one year showed that markets were concentrated in Middle East Asia and most of them were low-price order plant projects, which revealed the limitations. Although orders of overseas construction were slightly upward in the first half of 2017 compared to previous year, overseas construction orders are still unstable due to uncertainties in the international affairs and drops in oil prices. Second, the interest topics based on the 8th core keywords of overseas construction among the overseas construction issues for the past one year showed that region (29.9%), corporation environment (22.0%), profitability (17.0%), organizations (15.1%), projects (5.2%), market environment (3.6%), policy and system (3.6%), and education (3.5%) in the order of interest. Third, 10 core issues that have expandability and persistence of discourse were extracted out of 30 issue candidates with regard to eight keywords. Based on the extracted issues, detailed analysis on each of the core issues in overseas construction and correlation analysis between 10 core issues were conducted.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.1
• /
• pp.20-28
• /
• 2006

Statement of problem: The titanium has advantages of a high biocompatibility, a corrosion resistence, low density, and cheep price, so it is focused as a substituted alloy But it is quite difficult to cast with the tranditional method due to the high melting point, reacivity with element at, elevated temperature. By using the CAD-CAM system for the crown construction, it is possible to reduce the errors while proceeding the wax-up, investing, and casting procedure Purpose: The purposes of this study were to measure the marginal adaptation of the casting titanium coping and machine-milled titanium coping according to the casting methods and the marginal configurations. Material and method: The marginal configurations were used chamfer shoulder, and beveled shoulder. The total 30 copings were used, and these are divided into 6 groups according to the manufacturing method and marginal configuration. The gap between margin of the model and the restoration was measured with 3-dimensional measuring microscope. Results: The following results were obtained; 1. casting gold coping demonstrated the best marginal seal, followed by casting titanium coping finally machine-milled titanium copings. 2. In casting titanium coping, chamfer demonstrated the best marginal seal, followed by shoulder and beveled shoulder. There was no significantly difference in shoulder and beveled shoulder. But all margin form has clinically acceptable 3. In machine-milled titanium copings, chamfer demonstrated the best marginal seal, followed by shoulder and beveled shoulder. Beveled shoulder show large and uneven marginal gap Conclusions: Above result revealed that marginal adaptation of the titanim coping is avail able in the clinical range, it can be used as an alternative metal and it is prefered especially in chamfer or shoulder margin during implant superstructure fabrication. But there should be more research on machine-milled titanium in order to use it in the clinics.

• Journal of the Korean Institute of Gas
• /
• v.20 no.6
• /
• pp.9-15
• /
• 2016

Liquefied petroleum gas (LPG) and compressed natural gas (CNG) are often used as fuel for vehicles because they are clean alternative gas fuels. CNG, as a low-carbon fuel, can contribute to the reduction of greenhouse gas emissions. LPG is often used as fuel for taxis because the performance is almost the same as that of gasoline but the price is lower. In the present study, the exhaust gas and the particle number (PN) of particulate matter, which is a recent environmental issue, were compared between LPG and CNG for the same vehicle. A chassis dynamometer was used to conduct the test according to the Federal Test Procedure (FTP)-75 and Worldwide harmonized Light-duty vehicle Test Procedure (WLTC) modes. The PN values of discharged particles having sizes of 5 nm or larger and 23 nm or larger were measured using two condensation particle counters (CPC). The ratio of carbon dioxide was high in the exhaust gas from the LPG vehicle; the ratio of methane was high in the exhaust gas from the CNG vehicle. The PN values of the emitted particles from the two fuels were similar. The PN values of particles having sizes of 23 nm or smaller were high in the high-speed WLTC mode.

• Journal of the Korean association of regional geographers
• /
• v.22 no.2
• /
• pp.307-330
• /
• 2016

This article aims to explain how Gangnam, as a model and standard of compressed urbanization in South Korea, was created. Gangnam and Gangnam-style urbanization need attention not only because they contrast with Korea's urbanization in the past as well as urbanization in the West but also they provide an important model in contemporary Korea's politics, economy and culture. However, there are little studies of how Gangnam's peculiar urbanism was created. To fill this gap, this article will first capture Gangnam's peculiar urbanism as a material landscape and sociocultural lifestyle. Gangnam-style urbanism is (a) materially characterized by high-rise apartment complexes owned by the middle and upper class for dwelling and asset growth and (b) socio-culturally characterized by political conservatism, public indifference, competition over academic performance, appearance, and fashion, and nightlife. Then it will show Gangnam's archetype was created in a spatially and temporally compressed way in and through the spatial selectivity of Korean anti-communist authoritarian developmental state strategies: (1) anti-communism led to the diffusion and accommodation of the population through apartments in Gangnam in the context of its confrontation with North Korea and the fast-growing population of Seoul; (2) military authoritarianism excluded the low-income class and the urban poor from urban development; and (3) the developmental state adopted selective housing policy which treated construction companies and the middle class preferentially through exceptional zoning and price distortions, promoting the construction of apartment in Gangnam and its resultant uneven development.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.32-41
• /
• 2015

The Metropolitan Area Green Heat Project (MAGHP), which collects unused heat gathered from power plants, steel works, landfills in western Metropolitan area and distribute it to integrated energy business (IEB) companies, is proposed for the purpose of enhancing energy efficiency and providing low-price heat for IEB companies. Therefore, in order to decide on whether to initiate the MAGHP, the economic feasibility analysis of the project is widely demanded. This paper attempts to consider and measure four economic benefits: heat supply benefit, production cost reduction benefit, greenhouse gas mitigation benefit, and air quality improvement benefit. In addition, the paper tries to conduct the economic feasibility analysis. The project requires three-year investment and thirty-year operation. Three important findings emerge from the analysis. First, its net present value is computed to be 1,269 billion won and more than zero. Second, its benefit/cost ratio is calculated to be 1.72 and bigger than 1.0. Third, its internal rate of return is estimated to be 24.26% and larger than the social rate of return, 5.5%. In conclusion, the MAGHP is socially profitable and should be conducted immediately.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.16 no.1
• /
• pp.39-46
• /
• 2004

In the GIS construction to land and sea in Korea, GIS construction on land was completed mostly for big cities by NGIS(National Geography Information System) business. However, Marine GIS being constructed by the National Oceanographic Research Institute is still constructing geography information and definition of attribute information and real condition. We have done researches to get maximized ripple effect linking GPS and Navigation techniques on GIS. GPS in accuracy is divided into navigation and precise surveying equipments. Now, GPS technology has been developed very much and with low price GPS equipments are being introduced. But costs on the GPS equipments are high yet. Therefore, the GPS equipments for navigation can be substituted by cheap GPS equipments in a car or ship. In this paper, the authors developed algorithm to convert ellipsoid coordinate between WGS84 and Bessel ellipsoid and to analyze map projection between BESSEL ellipsoid and UTM plane coordinate system. And the author developed ship navigation system with cheap GPS equipments using algorithm of ellipsoid conversion and map projection. The authors proposed the necessity on constructing Internet GIS to manage many ships.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2010.03a
• /
• pp.40-40
• /
• 2010

Studies on attractive color changing property of dye chromophore and fluorophore have been greatly enjoyed in the related industrial and research fields such as optoelectronics, chemosensor, biosensor and so on. The optical property based on D-$\Pi$-A intramolecular charge transfer (ICT) system of chromophore molecules can be utilized as suitable sensing probes for checking media polarity and determining colorimetric chemosensing effect, especially heavy metal detection. These finding are obtained by absorption and emission properties. In this work, donor-acceptor D-$\Pi$-A type fluorescent dyes were designed and synthesized with the corresponding donor and acceptor groups. The selected donor moieties might be provided prominent amorphous properties which are very useful in designing and synthesizing functional polymers and in fabricating devices. Another reasons to choose are commercial availabilities in high purity and low price. Donor-bridge-acceptor (D-A) type dyes can produce impressive optical-physical properties, yielding them potentially suitable for applications in the synthesis of small functional organic molecules. Small organic functional molecules have unique advantages, such as better solubility, amorphous character, and represent an area of research which needs to be explored and developed. Currently, their applications in metalorganic compounds is rapidly expanding and becoming widespread in self-assembly processes, photoluminescence applications, chiral organocatalysts, and ingrafts with nanomaterials. Colloidal nanoparticles have received great attentions in recent years. The photophysical properties of nanoparticles, particularly in terms of brightness, photostability, emission color purity and broad adsorption range, are very attractive functions in many applications. To our knowledge background, colloidal nanoparticles have been enjoyed their applications in bio-probe research fields. This research interest can be raised by the advantages of the materials such as high photoluminescence quantum yields, sharp emission band, long-term photostability and broad excitation spectra. In recent, the uses of nanoparticles being embedded in a polymer matrix and binded on polymer surface have been explored and their properties such as photo-activation and strong photoluminescence have been proposed. The prepared chromophores and nanoparticles were investigated with absorption and emission properties, solvatochromic behaviors, pH induced color switching effects, chemosensing effects and HOMO/LUMO energy potentials with computer simulation. In addition, synthesized fluorophore dyes and particles were applied onto PE/Aramid fiber fluorescing colorations. And the related details were then discussed.

• Journal of Animal Science and Technology
• /
• v.57 no.2
• /
• pp.5.1-5.8
• /
• 2015

Background: Korean native chicken (KNC) is a well-known breed due to its superior meat taste. This breed, however, owing to a low growth rate, has a high market price. In order to overcome this disadvantage, the National Institute of Animal Science (NIAS) in Korea developed a commercial KNC breed, named Woorimatdag version 2 (WM2), an upgraded version of the Woorimatdag (WM1) breed and the WM2 was created by crossing the KNC with meat type breeds. This study aims to discriminate between WM2 and other chicken breeds using microsatellite (MS) markers. Methods: A total of 302 individuals from eight Korean chicken populations were examined. The genetic diversity and population structure analysis were investigated using Cervus, API-CALC, STRUCTURE, PowerMarker programs. Results: Based on heterozygosity and polymorphic information content (PIC) values, 30 MS markers were initially selected from 150 markers. The identified average number of alleles (Na), expected heterozygosity, and PIC values for the WM2 samples were 7.17, 0.741, and 0.682, respectively. Additionally, the paternity of individuals was assigned with a success rate of greater than 99% using 12 markers, the best minimum number of markers. The 12 selected markers contained heterozygosity and PIC values above 0.7 and probability of identity values around zero. Using these markers, the determined probability of identity (PI), $PI_{half-sibs}$, and $PI_{sibs}$ values were 3.23E-33, 5.03E-22, and 8.61E-08, respectively. Conclusions: WM2 is well differentiated with respect to other chicken breeds based on estimated genetic distances. The results presented here will contribute to the identification of commercial WM2 chicken in the market.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.6
• /
• pp.1137-1146
• /
• 2006

Under this economic circumstance, the logistics firms located in port take better advantages than those in other areas. This study observed those firms with consciousness to which matters were affected a growth of the logistics IT firms. This study considered in terms of three factors which are an economic factor, a political factor and an internal-ability factor for the matters of logistics IT firms' success through the factor analysis. According to the factor analysis, subjective factor showed positive: (1) expanding market through the ideas and abilities, (2) internal relations and government support (3) capability of market identification and focusing on regional industrialization. As a result of the internal ability analysis, there were three positive matters such as (1) a factor of organization or human resource management, (2) relationship with consumer and resource and management ability for strategy, and (3) developing unique product, networking, suitable goods of regional industrialization. The external factor, through the factor analysis was trued out (1) a emerged political factor such as a support up venture, cluster composition, investing R&D and specialist training, (2) economic factor such as tax reduction, financial support, marketing collaboration renting office in a low price by regional government.