• 한국정보통신학회논문지
• /
• 제18권8호
• /
• pp.1877-1884
• /
• 2014

원격 무선 네트워크 환경에서의 무인 센서 신호처리기의 임무 수행을 위해서는 한정된 전력 자원으로 인해 무인 원격 센서 무선운용 상황에 적합한 신뢰성 있는 저전력 매체 접속 제어 기법이 요구된다. 저전력 무선 네트워크에서 효과적인 신호 전송을 위해서는 CSMA/CA, X-MAC을 일반적으로 고려한다. 본 논문에서는 고정 노드로 구성되는 무선 네트워크에서 노드 제어를 위한 이동 노드의 망 참여/탈퇴가 유동적인 망 형태에서의 신속한 데이터 전달 및 소모 전력 최소화 달성이 가능한 저전력 성능이 향상된 LP-MAC 동작 기법을 제안한다. 고정노드는 망 자율구성을 수행하여 망에 수시로 참여/탈퇴하는 이동 노드로의 빠른 정보 전달을 위해 비동기 방식으로 동작한다. 이동 노드가 망에서 탈퇴할 경우, 망 전체 운용모드가 소모 전력의 최소화를 위한 동기모드로 천이됨으로써 최소 전력 운용이 가능한 매체접속 제어 기법이다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.411-416
• /
• 2005

Nowadays, diesel power plant using low speed two stroke diesel engine is widely used in islands and restricted areas. Considerations were given to its benefit of high thermal efficiency, reliability and durability compared to the other prime movers. However, various types of engine vibration affect neighboring buildings to their structural vibration. For this, diesel power plant are held liable for the troubles caused by these vibration. These are mainly due to the X- and H-type engine vibrations which we excited by the X- and H- guide force moment. Authors have identified a structural vibration of new pattern called ‘T-mode vibration’ due to the torsional vibration of shafting system. In this paper, T-mode vibration is analyzed through an experimental method based on the global vibration measurement.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권6호
• /
• pp.745-753
• /
• 2016

This paper presents a fully synthesizable low power interconnect bus for millimeter-scale wireless sensor nodes. A segmented ring bus topology minimizes the required chip real estate with low input/output pad count for ultra-small form factors. By avoiding the conventional open drain-based solution, the bus can be fully synthesizable. Low power is achieved by obviating a need for local oscillators in member nodes. Also, aggressive power gating allows low-power standby mode with only 53 gates powered on. An integrated wakeup scheme is compatible with a power management unit that has nW standby mode. A 3-module system including the bus is fabricated in a 180 nm process. The entire system consumes 8 nW in standby mode, and the bus achieves 17.5 pJ/bit/chip.

• 전기학회논문지
• /
• 제59권3호
• /
• pp.575-580
• /
• 2010

This paper is to design an optimum power conversion device for the system required for development of a low cost 3-phase power inverter. For this purpose, in order to meet with endurance required by the industry, failure mode is standardized to guarantee lifetime of a power semiconductor by monitoring real time power loss and to facilitate failure mode analysis. As normality of heat loss of a power semiconductor is identified remaining in a certain range by comparing heat rise slope between that is calculated by using average current or average loss and that is measured at a heat sink, its feasibility is confirmed by experiment.

• 대한한방소아과학회지
• /
• 제14권2호
• /
• pp.1-32
• /
• 2000

It has long been known that SOAT is effective for sudden palpitation occurring unexpectedly in Oriental Medicine. However, effect of SOAT on the isolated heart has not been studied yet. The purpose of this study is to investigate the effect of SOAT on hemodynamics and ECG of isolated rat hearts induced by electrical stimulation using Langendorff perfusion apparatus for nonworking heart. SOAT extract was manufactured by water-alcohol precipitated method. Sprague-Dawley rats weighting $120{\sim}150g$ were used for the experiments, Subject animals were divided into four groups, which are consisted of 1) control(Group orally administered by normal saline 1ml for 14days), 2) sample A(Group orally administered by SOAT extract 1ml for 14days), 3) sample C(Group injected by SOAT extract 0.5ml after stimulation, 4) sample C(Group injected by SOAT extract 1ml after stimulation. To evluate the effects of SOAT on hemodynamics and ECG of isolated rat heart induced by stimulation, heart rate, left ventricular pressure, systolic power, diastolic power, coronary artery perfusion volume and ECG were measured using Langendorff apparatus in both stimulation mode(5 volts, 450 beats/min) and arrythmic mode(5 volts, 420 beats/min including 60 beats/min) The results obtained are as follows : 1. After receiving stressful electrical stimuli, isolated heart showed the heart rate, left ventricular pressure, systolic power, diastolic power, coronary artery perfusion volume were all decreased temporarily, but perfusion continued longer recovery to the control state appeared. However, the coronary artery perfusion volume diminished continuously. 2. The heart rates did not change significantly with both stimulation mode and arrhythmic mode, among experimental groups. 3. The left ventricular pressure showed with both stimulation mode and arrhythmic mode, the significant changes(p<0.05) especially in the injection sample group. In case of stimulation mode, low concentration injection group(0.5ml) was more significantly increased rather than high concentration group(1ml) and in case of arrhythmic mode, high density group(1ml) was so increased than the other(0.5ml). 4. For the systolic power and diastolic power, no significant changes were noticed in the stimulation mode, but in the arrhythmic mode of injection sample groups, significant change(p<0.05) was noticed in both systolic power and diastolic power. Specially the high concentration group(1ml) showed more significant increase than the low concentration group. 5. For the coronary artery perfusion volume, no significant change difference among sample groups was observed in both the stimulation mode and the arrhythmic mode. 6. For the ECG recordings, arrhythmia was induced by electrical stimulus of arrythmia mode and after the stimulus was removed, irregular wave appeared temporarily, but as perpusion continued, recovery to the control state was abtained like the stimulation mode. According to the above results, SOAT significantly changed the hemodynamic data from the electrically stressed, isolated hearts of connected Langendorff perfusion apparatus and we propose SOAT has the direct effects on the muscular function of heart.

• 전자공학회논문지A
• /
• 제33A권5호
• /
• pp.212-221
• /
• 1996

A CMOS comparator is designed for low voltage and low power operations. The proposed comparator consists of a preadmplifier followed by a regenerative latch. The preasmplifier reduces the power consumption to a half with the power-down mode and the dynamic offsets of the latch, which is affected by each device mismatch, is statistically analyzed. The circuit is designed and simulated using a 0.8.mu.m n-well CMOS process and the dissipated power is 0.16mW at a 20MHz clock speed based on a 3V supply.

• 한국정보통신학회논문지
• /
• 제14권4호
• /
• pp.917-922
• /
• 2010

본 논문에서는 혼성모드 집적회로에서 이용 가능한 저전력 듀얼모드 CMOS 전류원 회로를 제안한다. MOS 소자의 전자이동도가 온도변화에 반비례하는 음의 온도계수 생성회로와 비례하는 양의 온도계수 생성회로의 합을 통해 변화하는 외부 온도에 독립적인 특성을 갖는 방식을 이용하였다. 특히, 두 개 이상의 출력을 얻어낼 수 있는 듀얼 출력단을 통해 정전류원을 얻을 수 있었다. 전류 분배를 통해 얻을 수 있는 듀얼모드 출력 전류값을 통해 차동 입출력 구조의 소자 및 필터 설계 등 아날로그 회로 영역에서 응용가능하며, 더불어 다양한 서브 블록 시스템 동작에 활용할 수 있는 유용한 특성을 지니고 있다. 저전압 저전력 특성을 보유하고 있는 제안된 전류원 회로는 2V 공급 전압하에서 0.84mW의 전력 소모값을 나타내었으며, 최종 출력값은 각각 $0.38{\mu}A/^{\circ}C$와 $0.39{\mu}A/^{\circ}C$의 변화율을 보여주었다. 제안된 회로는 $0.18{\mu}m$ n-well CMOS 공정을 이용하여 hspice 시뮬레이션 하였다.

• 동력기계공학회지
• /
• 제13권1호
• /
• pp.39-45
• /
• 2009

The attenuation of the fundamental non-torsional modes that propagate down buried steel water pipes has been studied. The mode shapes, mode attenuation due to leakage into the surrounding medium and the scattering of the modes as they interact with pipe joints and fittings have been investigated. In the low frequency region the mode predicted to dominate over significant propagation distances approximates a plane wave in the water within pipe. The established acoustic technique used to locate leaks in buried steel water pipes assumes that leak noise propagates as a single non-dispersive mode at a velocity related to the low frequency asymptote of this water borne mode.

• 대한임베디드공학회논문지
• /
• 제18권4호
• /
• pp.151-157
• /
• 2023

RPL (IPv6 Routing Protocol for Low-power Lossy Network) is a standardized routing protocol for LLNs (Low power and Lossy Networks) by the IETF (Internet Engineering Task Force). RPL creates routes and builds a DODAG (Destination Oriented Directed Acyclic Graph) through OF (Objective Function) defining routing metrics and optimization objectives. RPL supports a leaf mode which does not allow any child nodes. In this paper, we propose INFRA-RPL which provides a dynamic leaf mode functionality to a leaf node with the mobility. The proposed protocol is implemented in the open-source IoT operating system, Contiki-NG and Cooja simulator, and its performance is evaluated. The evaluation results show that INFRA-RPL outperforms the existing protocols in the terms of PDR, latency, and control message overhead.

• 대한전자공학회논문지SD
• /
• 제43권11호
• /
• pp.98-104
• /
• 2006

기존의 버스트 모드 자동전력제어 회로는 저 전력과 단일 칩화에 적합한 효율적인 구조인 반면에 데이터 율(data rate)이 높아짐에 따라 영의 밀도(zero density) 영향을 심하게 받아 에러를 야기하였다. 본 논문에서는 더블 게이트 MOS와 MOS다이오드를 이용하여 주입전류의 불균형을 보상하는 할 수 있는 새로운 구조의 첨두 비교기를 고안하고 이를 자동전력제어 회로에 적용하여 높은 데이터 율에서도 영의 밀도 변화에 강한 버스트 모드 자동전력제어 회로를 제안하였다. 제안한 자동전력제어 회로 내의 첨두 비교기는 높은 데이터 율에서 영의 밀도 변화에도 불구하고 정확한 전류비교 기준점을 견지하며 에러 없이 정상동작 하였다. 또한 제안한 첨두 비교기는 저전력 구조이고 대용량의 커패시터가 사용되지 않아 단일 칩화에도 적합하였다.