• 콘크리트학회지
• /
• 제8권5호
• /
• pp.189-200
• /
• 1996

콘크리트의 투수성은 내구성에 커다란 영향을 미치는 요인이 된다. 콘크리트의 강도가 커질수록 투수성은 적어지므로 재래적인 방법으로는 투수 실험이 어렵다. 본 연구에서는 콘크리트의 투수성능향상을 위하여 투수성이 작은 콘크리트에 효과적으로 사용할 수 있는 새로운 투수기법을 연구하고, 투수성이 매우 낮은 초저투수성 콘크리트를 개발하는데 주목적을두고 있다. 이를 위하여 주요 실험변수로서 시멘트의 종류, 단위시멘트량, 혼화재 종류 및 첨가량 그리고 굵은 골재의 최대치수를 주요 변수로 하여 투수성 시험과 가도시험을 포괄적으로 수행하였다. 본 시험 결과 콘크리트의 강도가 증가함에 따라서 콘크리트의 내투수성은 향상됨을 알 수 있으며, 내투수성을 증진하기 위해서는 단위시멘트량의 증가보다는 적절한 혼화재 사용과 그 혼입량을 조절하는 것이 더욱 효과적임을 알 수 있었다. 보통배합의 일반 콘크리트는 투수성이 매우 높은 반면 본 연구에서 제안된 콘크리트는 실리카흄등의 적정 혼입으로 일반 콘크리트의 1/100이하의 매우 낮은 투수성을 보여 초저투수성 콘크리트의 개발이 가능하였다. 본 연구는 앞으로 콘크리트 구조물의 내구성 향상을 위한 중요한 토대를 구축하고 이에 따른 기초자료를 제공할 수 있는 것으로 사료된다.

• 자원환경지질
• /
• 제53권1호
• /
• pp.99-110
• /
• 2020

국외에서는 DNAPL오염부지 정화처리 과정에서 오염된 저투수성 매체를 주요 관리대상으로 고려하며, 저투수성 매체로부터 역확산하는 오염물질과 대수층 오염 지속성에 관한 연구가 활발히 진행되어 왔다. 그러나 국내 지하수 분야에서는 관련 연구가 미비한 실정이기 때문에, 본 논문은 저투수성 매체에서 오염물질의 정확산 및 역확산 현상을 소개하고 대표적인 연구사례를 통해 그 중요성을 제안하고자 한다. 본 논문에서는 저투수성 매체의 경계조건에 따른 6개의 정확산 및 역확산 시나리오와 각각의 시나리오에 사용된 해석해를 제시하였다. FI (forward diffusion into infinite domain)와 BI (back diffusion from infinite domain) 시나리오는 저투수성 매체의 깊이를 무한하게 가정한 경우, 정확산과 역확산 시나리오를 나타내며 과거 대다수의 저투수성 매체와 관련된 연구에서 사용되었다. 최근 연구에서는 저투수성 매체의 깊이를 유한하게 고려하고 있으며, 본 연구에서 사용한 유한 경계에서 정확산 시나리오는 FFN(forward diffusion into finite domain with no flux boundary), 역확산 시나리오는 BFN (back diffusion from finite domain with no flux boundary)이다. 또한 저투수성 매체 하부 경계를 통한 오염물질의 이동이 가능할 때 정확산 시나리오는 FFF (forward diffusion into finite domain with flux boundary), 역확산 시나리오는 BFF (back diffusion from finite domain with flux boundary)에 해당한다. 본 논문에서 제시한 시나리오와 해석해를 사용한 모델링은 저투수성 매체의 깊이 또는 오염 노출 기간 등의 현장 특성에 맞는 오염처리 공법을 선정하는데 기여할 수 있다. 또한 모델링 결과는 대수층의 정화 이후에도 역확산으로 발생하는 오염의 지속기간, 오염 정도 등의 정보를 제공함으로써 보다 효율적인 오염 정화처리에 기여할 것으로 사료된다.

• Geosystem Engineering
• /
• 제21권6호
• /
• pp.344-351
• /
• 2018

It is reported that the flooding rate in low permeability sandstones is low and the oil recovery is hard to increase after water breakthrough. Understanding characteristics of waterflood is hence important for the recovery improvement. In this work, flooding tests on low permeability sandstones were conducted. The corresponding flooding characteristics were investigated by means of CT scanning and Nuclear Magnetic Resonance. Effects of irreducible water and different rates were also discussed in detail. Experimental results reveal a piston-like displacement at a low rate in low permeability samples. The saturation profile is steep and almost vertical to the forward direction. The results at a low rate confirm that once water broke through, increasing the flooding rate or flooding time can hardly reduce the remaining oil inside the sample. It is probably due to the high pore-throat ratio proven by rate-controlled mercury. Results also confirm that the presence of initial water enhanced sweep efficiency substantially. On one hand, because water had previously occupied the small pores, the subsequent oil can only invade relatively large pores and became more movable. On the other hand, stable collars can not form due to the steep front, which may suppress the snap-off.

• 자원환경지질
• /
• 제53권1호
• /
• pp.11-21
• /
• 2020

본 연구는 대수층과 저투수층이 존재하는 단일시스템에서 trichloroethylene (TCE)과 tetrachloroethylene (PCE)의 거동에 대해 1차원 확산 해석해를 사용하여 저투수층의 농도 분포, 대수층과 저투수층의 경계면에서 확산 선속, 그리고 역확산에 의한 대수층의 오염 지속성을 모델링하였다. 모델링에 사용된 해석해는 이전 연구에서 많이 사용되었던 저투수층의 두께가 무한한 조건의 해석해와 본 연구에서 제시한 저투수층의 두께가 유한한 조건을 고려한 해석해를 모두 사용하였다. 제시된 해석해의 타당성을 평가하기 위해 저투수층의 두께가 무한한 조건의 해석해와 Yang et al.(2015)이 개발한 1차원 확산 해석해의 결과를 Nash-Sutcliffe 유효계수(NSE)로 비교하였다. 저투수층의 농도 분포, 확산 선속, 그리고 대수층의 오염 지속성 등 모든 결과에서 무한한 조건의 해석해를 이용하였을 때 과소평가되는 결과를 나타내었다. 그리고 본 연구에서 제시한 해석해의 결과와 Yang et al. (2015)이 개발한 해석해의 결과는 높은 일치성(NSE = 0.99)을 보였다. 본 연구에서 제시한 해석해를 실제 오염된 부지에 효율적으로 적용하기 위해 유효확산계수, 저투수층의 두께, 그리고 확산된 시간을 이용하여 확산 거리(Z_d)라는 용어를 소개하였다. 확산 거리가 0.7 보다 작은 경우 저투수층의 두께가 무한한 조건의 해석해를 사용할 수 있으며, 확산 거리가 0.7 보다 큰 경우 저투수층의 두께가 유한한 확산 해석해를 사용하여야 모델링의 신뢰성을 높일 수 있을 것으로 사료된다.

• International Journal of Concrete Structures and Materials
• /
• 제2권2호
• /
• pp.83-90
• /
• 2008

Permeability to vapor and water among other performances required for finishing materials is dealt with in this study. The relative moisture content of concrete coated/covered with a finishing material was experimentally investigated while changing the environmental conditions including temperature, relative humidity, and rainfall. An organic paint (water-based urethane), organic synthetic resin emulsion-type film coating (film coating E), and inorganic porcelain tiles were selected as the finishing materials. When compared from the aspect of vapor and water permeability, the vapor permeability and water permeability of water-based urethane were high and low, respectively; those of film coating E were high and high, respectively; and those of porcelain tiles were low and low, respectively. This means that the moisture state of concrete structures is governed not only by the environmental conditions but also by the performance of finishing materials. It is therefore of paramount importance to appropriately select a finishing material to address the specific deteriorative factors involved in the concrete structure to be finished.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.545-552
• /
• 2002

The purpose of this paper is to investigate permeability characteristic of soil-bentonite landfill liner and development of desirable liner system. In this study, permeability tests for soil-bentonite, reactive soil-bentonite and apply bentomat and reactive mat are carried out under the low and high water pressure. According to test result, additional amount of bentonite decreases the coefficient of permeability up to the bentonite mixture ratio of 15%. Therefore, the permeability test for landfill liner's indicated that the use of general water would be in more safe side because the liner system show low permeability duet decrease effect of porous by suspended soild(SS). The permeability of leachate for Zeolite mixture ratio 0, 5, 10% with bentonite mixture ratio 15% showed negligible variation in the permeability with general water. Therefore, Zeolite could be used as a successful that is available purification material for the treatment of leachate, without changing the of landfill liners. Also odious smell could be removed by adding smell amount of Zeolite to the leachate. It was revealed that the bentomat and reactive mat installed in soil-bentonite layer effectively improved the permeability as well as purification of the leachate.

• 한국의류산업학회지
• /
• 제22권1호
• /
• pp.112-118
• /
• 2020

This paper examined the water repellency, water proofing and water vapor permeability of twelve types of woven fabrics for sports wear clothing. Their physical properties were compared and discussed with the fabric structural parameters and surface finishing effect. A water repellent property of 100% was obtained in the coated or laminated water repellent finished fabrics; in addition, cotton/nylon breathable composite fabrics treated with a laminated finishing and with low fabric density showed a 90% water repellency. Water proofing fabric above 6,000 mm H₂O hydraulic pressure was achieved by coated or laminated finishing; however, high density fabric or medium-level coated fabrics exhibited 100% water repellent and low water proofing characteristics. Superior water vapor permeability characteristics with good water repellency and proofing properties were achieved at the 2.5 layered low density and with 0.7 - 0.9 cover factor nylon fabrics treated with hydrophilic laminated finishing. The regression analysis for examining the effects of fabric structural parameters and surface finishing such as coating and laminating to the water vapor permeability exhibited a high determination coefficient of fabric structural parameters of 63.5%; in addition,, main factors among fabric structural parameters appeared to be cover factor and fabric thickness per weight. Coating and Laminating factors exhibited determination coefficient of water vapor permeability parameters of 36.5%.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.611-612
• /
• 2006

In a manufacturing technique of the sintered filter, pressureless sintering method has good permeability, it is not need the binder and lubricant used on compacting process, so it has little contamination and it is easy to control the pore size and shape but the mechanical strength is low relatively and it is difficult that parts of complicate form are manufactured. In the case of manufacturing the filter by press and sintering method, in order to be satisfactory characteristic of un-pressed filter, in this study sintered metal filter fabricated by using 30-40mesh stainless steel 316L powder and additive agents. Porosity and structure of pores, permeability and mechanical strength of the sintered filter were investigated with the variation sintering conditions. Porosity was nearly constant about $60{\sim}70%$, density, permeability and mechanical strength were changed markedly with quantity of additive materials and sintering conditions.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.985-990
• /
• 2001

Chloride permeability of high strength concrete(HSC) was investigated using saltwater pending test and rapid chloride permeability test by electrical potential(ASTM C 1202). The lower water-cement ratio concrete showed the lower diffusion coefficient of chloride. The relationship between the diffusion coefficient of chloride and charge passed by the rapid chloride permeability test could be obtained. This relationship appears to be an effective method for evaluating chloride permeability of low water-cement HSC.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.491-498
• /
• 2002

Dredged and reclaimed soft clays form slurry state which is very high water content and very low shear strength, experience large self-weight consolidation, nonlinear compressibility and permeability phenomenon would take place. In this case, a material functions which represent variety effective stress-void ratio-permeability relation (especially very low effective stress), are should be determined to predict nonlinear finite strain consolidation phenomenon forehand In this study, large slurry consolidometer with a 380mm diameter and a 1400mm height which is able to consolidation and permeability test, was developed to determine material function of very soft clay with a 500% initial water content clay, self-weight consolidation and low stress level consolidation (1Kpa, 3Kpa, 6Kpa, 12Kpa) was conducted and after each consolidation step permeability test also conducted. after final consolidation step, a constant rate of strain consolidation was conducted with undisturbed sample obtained from the large consolidometer. On the above result, material function was determined and laboratory test was modelled to evaluate its validity, numerical analysis on th field was compared to other method.