• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.10
• /
• pp.85-90
• /
• 1971

Dormancy breaking methods were studied on Avenasterilis seeds. The treatments were: application of alcohol, hot water, low temperature, pure oxygen, thiourea and gibberellic acid. Thiourea treatment with 3 different concentrations (0.25 x 10$^{-2}$ M, 0.625 x 10$^{-2}$ M, 1.25 x 10$^{-2}$ M) had little effect in breaking dormancy. Gibberellic acid treatment applied at 5ppm, 50ppm, 500ppm were effective and maximum germination was obtained with 500ppm. Low temperature treatment at 3$^{\circ}C$ for a week in a refrigerator was also very effective in breaking dormancy. Other treatments were not effective. In all cases, primary seeds germinated significantly better than secondary seeds. Different A. sterilis strains varied significantly in their response to gibberellic acid treatment. Different concentrations of gibberellic acid also gave significantly different responses in breaking dormancy.

• Progress in Superconductivity
• /
• v.9 no.1
• /
• pp.91-95
• /
• 2007

[ $YBa_2Cu_3O_{7-{\delta}}$ ] films have been prepared on $LaAlO_3$ (100) single-crystal substrates by the metal organic deposition using dichloroacetate precursors (DCA-MOD). DCA precursor solutions with different composition such as; Yttrium-excess(15 at%), barium-poor(25 at%), and a stoichiometric(Y:Ba:Cu=1:2:3) were prepared in order to investigate the effects of precursor composition on the properties of YBCO films prepared by DCA-MOD method. Coated films were calcined at low temperature up to $500^{\circ}C$ in flowing humid oxygen atmosphere. Conversion heat treatment was performed $800^{\circ}C$ for 2 h in flowing Ar gas containing 1000 ppm oxygen with a humidity of 9.45%. For the film prepared using excess yttrium composition, high critical current density ($J_c$) of $>2MA/cm^2$ was obtained whereas, for the films prepared using barium-poor composition, $J_c$ was lower than $1MA/cm^2$.

• Environmental Engineering Research
• /
• v.25 no.2
• /
• pp.212-221
• /
• 2020

This work discusses the palm oil mill processing carried out at Jugra Palm Oil Mill Sdn Bhd, situated at Selangor, Malaysia with the capacity of 45-t fresh fruit bunch (FFB)/h. Typically, oil palm residues and palm oil mill effluent (POME) from FFB are generated while processing. Prior to discharge, POME should be treated to remove pollutants in the effluent. As such, the performances of anaerobic and aerobic ponds were assessed in this study to determine temperature, pH, biological oxygen demand (BOD), sludge volume index (SVI), and dissolved oxygen (DO). From the experiments, mesophilic temperature due to better process stability was applied in anaerobic ponds. The pH results displayed a fluctuating trend between lower control limit and upper control limit, and, the pH value increased from one pond to another. The final discharge BOD and SVI appeared to be lower than 100 mg/L and 10 mL/L indicating low degree of pollution and good settling ability for biomass/solid. DO was close to normal, mostly below 2 mg/L. The experimental outcomes revealed the effective treatability of POME in adherence to the standard regulation, which is the priority for environmental sustainability within this industry domain.

• Corrosion Science and Technology
• /
• v.17 no.3
• /
• pp.123-128
• /
• 2018

The fabrication of a controlled surface is of great interest because it can be applied to various engineering facilities due to the various properties of the surface, such as self-cleaning, anti-bio-fouling, anti-icing, anti-corrosion, and anti-sticking. Controlled surfaces with micro/nano structures were fabricated using an ion beam focused onto a polypropylene (PP) surface with a fluoridation process. We developed a facile method of fabricating hydrophobic surfaces through ion beam treatment with argon and oxygen ions. The fabrication of low surface energy materials can replace the current expensive and complex manufacturing process. The contact angles (CAs) of the sample surface were $106^{\circ}$ and $108^{\circ}$ degrees using argon and oxygen ions, respectively. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FT-IR) spectroscopy were used to determine the chemical composition of the surface. The morphology change of the surfaces was observed by scanning electron microscopy (SEM). The change of the surface morphology using the ion beam was shown to be very effective and provide enhanced optical properties. It is therefore expected that the prepared surface with wear and corrosion resistance might have a considerable potential in large scale industrial applications.

• Journal of the Korean Ceramic Society
• /
• v.37 no.2
• /
• pp.168-173
• /
• 2000

YMnO3 thin films were prepared on Pt/Ti/SiO2/Si substrate by chemical solution deposition method. The films were crystallized by heat-treatment at 85$0^{\circ}C$ for 1 hour. Effects of an annealing atmosphere(O2, Ar, vacuum) on the crystallization behavior and electridcal properties were investigated. YMnO3 thin films annealed under Ar atmosphere showed a superior crystallinity and a very strong c-aix preferred-orientation which was a polar axis. Leakage current density of the films decreased with lowering oxygen partial pressure of the annealing atmosphere. C-V and P-E ferroelectric hysteresis were observed only in the thin film heat-treated under Ar atmosphere.In order to prepare YMnO3 thin films having both low leakage current and ferroelectricity, the annealing atmsphere should be kept under a proper oxygen partial pressure which was about 1 Pa in this work. Leakage current density at 1 volt, dielectric constant($\varepsilon$r), remanent polarization(Pr), and coercive field(Ec) were 1.7$\times$10-8 A/$\textrm{cm}^2$, 25, 1.08$\mu$C/$\textrm{cm}^2$, and 100 kV/cm, respectively.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.355-358
• /
• 2002

In this study, we have tried to find the maximum microbial efficiency at the various dissolved oxygen (DO) concentration conditions in the treatment of pharmaceutical wastewater. Experiments of activated sludge process were performed to examine the relation between microbial activity and DO concentration in a continuous bioreactor. The reduction rate of COD (chemical oxygen demand) was low at the DO concentration between 0 ppm and 1.0 ppm, but it went higher and showed maximum between 1.5 ppm and 3.0 ppm. Then the COD reduction rate was quickly decreased above the DO concentration of 3.0 ppm.

• Biomolecules & Therapeutics
• /
• v.4 no.4
• /
• pp.402-407
• /
• 1996

Effects of oxidative stress on the induction of apoptosis and the activity of antioxidant enzymes were investigated in HL-60 cells using $H_2O$$_2$and cisplatin which generate oxygen species in the cell. Various concentrations of oxidants were treated to cells and at different incubation time, cells were harvested for assays. Cell viability, morphology by propidium iodide staining and DNA fragmentation by agarose gel electrophoresis were observed to determine whether they induce apoptosis. The activity of antioxidant enzymes such as superoxide dismutase and catalase was also measured to evaluate the cellular response to the oxidative damage. The results are as follows: $H_2O$$_2$ induced apoptosis at 10 $\mu$M after 6h incubation, while it took 12h for cisplatin. Both oxidants induced the superoxide dismutase activity at a tolerable low concentration. However, at a concentration which causes apoptotic cell death, the enzyme level was dropped markedly at first and then recovered to the normal level after which it declined again, probably due to cell death. On the other hand, changes in the activity of catalase were not significant at most concentrations except the statistically significant decrease at 24h after 10 $\mu$M-$H_2O$$_2$treatment. In this study, $H_2O$$_2$- and cisplatintreated cells showed similar results in apoptotic response and enzyme activities, suggesting that anticancer activity of cisplatin may be related, at least in part, to the production of oxygen free radicals.

• Journal of the Korean institute of surface engineering
• /
• v.39 no.3
• /
• pp.98-104
• /
• 2006

Al-doped ZnO (AZO) films were deposited on the plastic substrate by inductively coupled plasma (ICP) assisted DC magnetron sputtering. The AZO films were produced by sputtering a metallic target (Zn/Al) in a mixture of argon and oxygen gases. AZO films with an electrical resistivity of ${\sim}10^3\;{\Omega}cm$ and an optical transmittance of 80% were obtained even at a low deposition temperature. In-situ process control methods were used to obtain stable deposition conditions in the transition region without any hysteresis effect. The target voltage was controlled either at a constant DC power. It was found that the ratio of the zinc to oxygen emission intensity, I (O 777)/I (Zn 481) decreased with increasing the target voltage in the transition region. The $Ar/O_2$ plasma treatment improve the adhesion strength between the polycarbonate substrate and AZO films.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.2
• /
• pp.57-60
• /
• 2018

Recently, Thin-film transistors (TFTs) are fundamental building blocks for state-of-the-art microelectronics, such as flat-panel displays and system-on-glass. Zinc oxide thin films have the advantage that they can grow at low temperature and can obtain high charge movility. Also the zinc oxide thin film can be used to control the resistance according to the oxygen content, so it is very easy to obtain the desired physical properties. In this paper, we fabricated a zinc oxide thin film on a polished copper substrate through a solution process, then improved the crystallinity through a geat treatment porcess, and studied to transfer it on a flexible substrate after the heat treatment was completed.

• Membrane Journal
• /
• v.32 no.4
• /
• pp.227-234
• /
• 2022

Wastewater is released from leather, textile, paint, wood, or dye processing industries as well as petroleum refining industries. Wastewater from these industries contains water pollutant such as heavy metals and nitrogen compounds and has high chemical oxygen demand (COD). While there various filtering pollutants from wastewater for safe disposal, membrane-based technology is one of the most efficient methods for its high efficiency and low cost. Among various membranes, zeolite membranes gain spotlight for its cost-effectiveness and have undergone a lot of research. This review is focused on recent progress in zeolite membrane for wastewater treatment in following order: i) wastewater treatment, ii) microfiltration membrane, iii) hollow fiber membrane, and iv) ultrafiltration membrane.