• Weed & Turfgrass Science
• /
• v.5 no.4
• /
• pp.268-273
• /
• 2016

Potassium is well-known to improve turfgrass tolerance to environmental stresses such as low temperature and drought stress. Low mowing height reduces leaf area of turfgrass that is main place for photosynthesis and carbohydrate production. Closely-mowed turf would suffer from summer decline by low level of carbohydrate resulted from low photosynthesis of reduced leaf area. The objective of the study is to investigate K rate and mowing height for Kentucky bluegrass. The K rate treatments were 5, 10, and $20g\;K_2O\;m^{-2}$ for the low, medium and high K rates, respectively. The bi-weekly mowing treatment was made for treatments. Mowing was implemented at 40 and 100 mm using a rotary mower. Regardless K rates, the high mowing height would be required when the air temperature is higher than $28.5^{\circ}C$ and high turfgrass quality of Kentucky bluegrass is needed. When the air temperature is optimal for cool-season grass, the high mowing height and the low K rate is needed for the root length of Kentucky bluegrass.

• Korean Journal of Plant Resources
• /
• v.24 no.2
• /
• pp.260-266
• /
• 2011

This study was carried out to control biennial weed which gives a lot of damage to landscaped and early growth of lawns in early spring. The results obtained from the mowing experiment are as follows. (1) Average of occurrence rate of weed species of the total treatments was 17.9%, (2) Occurrence rate of weed species was as 24.7% at 12.5 mm low mowing section. The rate indicates that the lowest weed depression effect was appeared at the lowest mowing among 4 mowing sections. (3) Occurrence rate of weed species was 10.6% at 22.5 mm mowing section. The highest weed depression effect among the 4 mowing sections was observed at the 22.5 mm mowing section. (4) Occurrence rates of weed species were 18.2% and 18.3% at 32.5 mm and 42.5 mm high mowing section, respectively.

• Weed & Turfgrass Science
• /
• v.7 no.2
• /
• pp.140-147
• /
• 2018

In Korea, mowing the grass of a grave (Beolcho) is a very important event preceded by Chuseok (Korean thanks giving day) and Si-Hyang (annual ancestral feast). Because Beolcho usually takes place one or two weeks before Chuseok, the traffic accidents on roads are getting worse and safety accidents are getting more and more. Erroneous Beolcho methods can cause the soil to be exposed and cause the loss of soil or the low shoot density of graveyard grass or weed occurrence. Therefore, the dispersion of the Beolcho timing and the approprite method can be import issues. The present study assessed the effects of grass mowing timing and height before Chuseok on the growth of Zoysia japonica and Z. matrella. The mowing timing was evaluated at 1 week, 2 weeks, 3 weeks, and 4 weeks before Chuseok, and the mowing height differently according to the two type of grass. In Z. japonica, the faster mowing before Chuseok, the longer the plant height, and the coverage rate and shoot density were higher. In Z. matrella, the faster mowing, the longer the shoot length, but the coverage rate and shoot density did not show any difference or tendency. As compared to Z. japonica, the plant height of Z. matrella was kept short regardless of the time of mowing. In both grasses, the plant height was shortened when mowing was done at low cutting height, but the coverage rate and shoot density were decreased. In addition, it was shown that it is advantageous to maintain the shoot density of graveyard lawn by 40-50 mm or 30-40 mm cutting above the ground for Z. japonica or Z. matrella, respectively.

• Asian Journal of Turfgrass Science
• /
• v.25 no.2
• /
• pp.223-228
• /
• 2011

This research was performed to investigate change of green speed according to growth of grass, for this, the method of effective green management for improvement of green speed was searched by investigating green density, soil moisture, surface hardness, and mowing height every day for 6 months. As the result of the study, reliability between, green density, soil moisture, surface hardness, mowing height and green speed were measured to be respectively 0.4742, 0.5690, 0.4632, 0.2806, i.e. soil moisture is considered as the factor which affects green speed the most. Therefore, it will be an advantageous environment to maintain soil moisture a little bit low to improve green speed within the range that does not disrupt the growth of green. In case of green density, it is considered to be effective to get a fast green speed when obtaining enough density during May~June, the most vigorous growth period and at the same time green up period. Surface hardness was confirmed that management work as rolling is a considerably effective method to increase hardness. However, rolling gives high stress to the green, combining another management work as regular hilling could be a good alternative. Reliability of green preview and green speed was 0.2806, lower than soil moisture or surface hardness. Through the results, it was confirmed that management of mowing height to be low less than 3.00 mm is helpful to improve green speed, timely, and it is advantageous to manage green speed when adjusting mowing height during the vigorous growth period of bent grass. However, considering the range of mowing height was not various, being 2.9~3.4 mm, henceforth research on investigation of green speed at more various mowing heights would be necessary. Consequently, except mowing height, other three factors, i.e. green density, soil moisture and surface hardness were investigated to have considerable level of reliability on green speed, and it is considered that each factor affects green speed respectively according to green condition and time. Accordingly, in order for the manager to maintain high speed all year round, intensive care for each factor per time unit considering green growth condition is considered to be necessary.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.5 s.112
• /
• pp.83-93
• /
• 2005

Research was initiated to investigate turf performance under USGA soil system. USGA system 45 centimeters deep was built with rootzone layer, intermediate layer, and drainage layer. Six turfgrass entries were comprised of 3 blends and 3 mixtures from cool-season grasses (CSG). Turfgrass color and quality ratings were best in spring and fall, especially early May to early July and late August to early November. Kentucky bluegrass (KB) consistently produced the greatest performance, while perennial ryegrass (PR) the poorest. Intermediate turf performance between KB and PR was observed with tall fescue (TF). Among CSG mixtures it increased with KB but decreased with PR. There were considerable variations in summer turf Performance. No summer drought injury was found in KB and TF. However, PR showed poor performance through summer as compared with others. Among mixtures, it decreased with PR. It was suggested that PR mix in less than $20\%$ in the mixtures to have an acceptable quality in summer. Cultural intensity also affected it. With lowering mowing height, KB of rhizomatous-type in growth habit kept good quality, while PR and TF with bunch-type in growth habit poor quality. Mowing quality was greatly different among CSG. KB produced clean-cut surface, but PR unclean one. If had an intermediate mowing quality between KB and PR. A great difference in green color retention was observed among CSG. The longest CSG was PR that kept green for 339 days, while the shortest one TF for 267 days. KB continued to keep green for 290 days. The mixtures kept green in color for 292 to 315 days, depending on turfgrass mixing intensity. The greater the PR in content, the longer the green color duration. These results demonstrate that KB was the best and PR the worst among CSG grown in USGA system under a domestic climate, in regards of turf quality, color, mowing quality, summer turf performance and green color duration. KB and TF are most adequate for high-maintenance and low-maintenance area, respectively. In case of mixtures for high-quality turf, it was desirable to use KB-based mixture with PR of below $20\%$ in seeding rate.

• Asian Journal of Turfgrass Science
• /
• v.20 no.1
• /
• pp.11-23
• /
• 2006

This study was carried out to propose low types of green speed expectation models for fast putting green management by changing mowing height($4.0{\sim}2.5$ mm) and timing of rolling, dew removal and dew removal+rolling. Ball roll distance data were taken from the creeping bentgrass(Agrostis palustris Huds. 'Penncross') practice green of east course at the Lakeside C.C. in October 18, 2001 and May 25, 2002. Data were subjected to multi-regression analysis using Statistical Package for the Social Science. Among four types of green speed expectation models, the best multiple-regression equation for fast green management was as follows; $Y_4=4.171-0.225{\cdot}X_1-0.038{\cdot}X_2$ (where, $Y_4$ : green speed(m) after single dew removal+single rolling, $X_1$ : mowing height($4.0{\sim}2.5,\;X_2$ : passage of time ($0{\sim}8$ h.)). The equation[single dew removal by using sponge roller $\rightarrow$ single mowing at 3.0 mm height or less $\rightarrow$ single rolling] explained to provide fast green over 3.2 m (Stimpmeter readings required for USGA championship play) until the end of first round. Therefore, this cultural practice system was believed to provide fast putting green condition for professional golf tournament

• Asian Journal of Turfgrass Science
• /
• v.18 no.4
• /
• pp.201-209
• /
• 2004

This study was carried out to develope new zoysiagrass cultivar 'Senock' (Patent registration: 10-2003-0072018). Artificial crossing between collected lines of Z. sinica and Z. matrella (collected in South Korea) was conducted to develope F1 plant (CSM) which was cultivated at field for open self-pollination. Among the open pollinated progenies, CSM8 (Senock) showed superior performance in color and density rating. 'Senock' showed genetically dark green color, with medium leaf width ($3.1\pm0.17mm$), low plant height ($14\pm5.67cm$), and wide leaf angle ($67.3\pm11.1degree$). Height to the lowest leaf blade of this cultivar was $2.0\pm0.14cm$, which may allow low mowing height. Specific bands with primer number OPB7 by RAPD analysis can be used for cultivar identification.

• Asian Journal of Turfgrass Science
• /
• v.19 no.2
• /
• pp.103-113
• /
• 2005

This study was conducted to improve the green up of zoysiagrass(2. japonica) and cool-season grass($80\%$ Kentucky bluegrass+$20\%$ Perennial ryegrass) during early spring in Korea. Treatments fur zoysiagrass were control, Polyethylene film, Black screen, Black screen+polyethylene film, Green screen+polyethylene film, Polyethylene film+Black screen, Polyethylene film+Green screen, low mowing height(1.5-2cm) and homing. For cool-season grass, non-punched Polyethylene film, punched Polyethylene film treatments were included. Application dates of covering with Polyethylene film were Feb. 22, Feb. 28, March 7, and March 14. Green up was evaluated by visual color rating. The results are as follows; 1. The best method for improving green up of zoysiagrass were Polyethylene film and optimal covering day for zoysiagrass was on Feb. 22. 2. Low mowing height(1.5-2cm) and burning of zoysiagrass showed the faster greening 1$\sim$weeks before than control. .3 Non-punched Polyethylene film covering was best to improve green up of cool-season grass. More time of covering time with cool-season grass induces rapid green up.

• Weed & Turfgrass Science
• /
• v.2 no.2
• /
• pp.198-201
• /
• 2013

This study was carried out to develope new zoysiagrass cultivar Semil' (Registration no. 1749). Artificial crossing between the collected lines of typical Z. matrella, NM1 (collected in South Korea) and the different ecotype of Z. matrella, ASm (collected in South Korea) was made to develop a F1 hybrid plant (NM1 ${\times}$ ASm). Among the 30 progenies, (NM1 ${\times}$ ASm)-1 (Semil) showed superior performance in density rating. 'Semil' showed genetically light green color, with narrow leaf width ($2.7{\pm}0.12mm$), and low plant height ($10.3{\pm}3.7cm$), Length to lowest leaf blade of this cultivar was $1.8{\pm}0.15cm$, which may allow low mowing height upto 12 mm.

• Asian Journal of Turfgrass Science
• /
• v.20 no.1
• /
• pp.1-10
• /
• 2006

This study was carried out to develope new zoysiagrass cultivar 'Millock'(Patent registration No. : 10-2005-0110051). Artificial selfing of collected line of MJ8 was conducted to develope F1 plant (MJ8S). Among the inbred progenies, MJ8S-9 (Millock) showed superior performance in color, density, and rust resistance. 'Millock' showed genetically dark green color, with medium-textured leaf ($4.2{\pm}0.44$ mm), short internode length ($3.5{\pm}0.28$ cm), and wide leaf angle ($52.5{\pm}10.8$ degree). Height to the lowest leaf blade of this cultivar was $1.9{\pm}0.91$ cm, which may allow low mowing height. 'Millock' has a yellowish green stolen. Also, specific bands with primer number OPB 8 by RAPD analysis can be used for a cultivar identification.