• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제36권12호
• /
• pp.1193-1199
• /
• 2012

A cup burner experiment was performed to investigate the effect of the oxidizer velocity and concentration on flame instability near extinction. Heptane was used as a fuel and air diluted by nitrogen and carbon dioxide was used in the oxidizer stream. Two types of flame instabilities at the flame base and at axial downstream were observed near extinction. The instability at the flame base could be characterized by cell, swing, and rotation modes, and the cell mode changed to the rotation mode through the swing mode as the oxidizer velocity increased. To assess the parameters for the flame instability, the initial mixture strengths, Lewis number, and adiabatic flame temperature were investigated under each condition. The Lewis number might be the most important among them, but it is impossible to generalize because of the insufficient number of cases. Furthermore, the axial periodic flickering motion disappeared at low and high oxidizer velocities near extinction. This resulted from the fact that low oxidizer velocity induced evaporated fuel velocity below the critical velocity and high velocity made the reacting fuel velocity comparable.

• Journal of Chest Surgery
• /
• 제30권4호
• /
• pp.373-377
• /
• 1997

Between January, 1991 and May 1995, mitral valve repair was undertaken on 32 patients under 15 years for congenital mitral regurgitation. Mean age was 24.0$\pm$26.1 months(range 3 months to 15 years), 16 patients were male and 16 patients were female associated cardiac anomalies were found in 26 patients (81%), and ventricular septal defects were noted in 18 patients(56%). In regards to pathologic findings, there were annular dilatation(n:7), leaflet prolapse(n=18), cleft leaflet(n=5) and restricted valve motion (n=2). The method of repair consisted of annuloplasty(Modif ed Devega type) in 14, repair of redundunt leaflet in 6, closure of cleft in 5, triangular resection in 2 and splitting of papillary muscle in one. There was no operative mortality and two late deaths occurred as a result of heart failure and sepsis. Tro patients required replacement of the mitral valve after 3 months and 7 months respectivehy because of recurrent mitral regurgitation. Actuarial survival was 92.5% at 46 months and actuarial freedom from reoperation was 95% at 12 months and 92.5% at 46 months. Actuarial freedom from valve repair failure was 68% at 12 months and 61.8% at 46 months. Although valve repair failure rate was high, we believe that mitral valve repair should be of rcrred to children because of low mortality and low reoperation rate.

• Journal of the Korean Wood Science and Technology
• /
• 제37권1호
• /
• pp.37-47
• /
• 2009

For the inspection of wood, machine vision is the most common automated inspection method used at present. It is required to sort wood products by grade and to locate surface defects prior to cut-up. Many different sensing methods have been applied to inspection of wood including optical, ultrasonic, X-ray sensing in the wood industry. Nowadays the scanning system mainly employs CCD line-scan camera to meet the needs of accurate detection of lumber defects and real-time image processing. But this system needs exact feeding system and low deviation of lumber thickness. In this study low cost CCD area sensor was used for the development of image processing system for lumber being fed. When domestic red pine being fed on the conveyer belt, lumber images of irregular term of captured area were acquired because belt conveyor slipped between belt and roller. To overcome incorrect image merging by the unstable feeding speed of belt conveyor, it was applied template matching algorithm which was a measure of the similarity between the pattern of current image and the next one. Feeding the lumber over 13.8 m/min, general area sensor generates unreadable image pattern by the motion blur. The red channel of RGB filter showed a good performance for removing background of the green conveyor belt from merged image. Threshold value reduction method that was a image-based thresholding algorithm performed well for knot detection.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• 제4권1호
• /
• pp.1-9
• /
• 1999

Hydrographic survey was carried out in the mid-eastern Yellow Sea from Keum River to Taean Peninsula in order to study the motion of the freshwater from the Keum River during July 07-12, 1997 when a large volume of freshwater was discharged from the Keum River weir. The low-salinity (less than 30.0 psu) plume was distributed over the large area between the Keum River and Ochong Island, 60 km northwest off the Keum River mouth. A band of relatively low saline water, originating from the Keum River, was also observed to the north of Ochong Island. The strong haline front had advanced from near Sibidongpa Island to Ochong Island, 25 km northwest of Sibidongpa Island, for 48 hours. A northwestward flow of a speed greater than 0.2 m/s was observed in the surface plume layer to the north of Sibidongpa Island where the water column was strongly stratified. The observed mean flow and the change of the frontal position are interpreted as resulting from the spreading of the Keum River plume. These results suggest that the discharge from the Keum River plays an important role in the coastal circulation of the mid-eastern Yellow Sea adjacent to the river.

• Journal of the Korean Society for Marine Environment & Energy
• /
• 제9권4호
• /
• pp.225-234
• /
• 2006

Using the data from the sea water monitoring system installed at the Ieodo Ocean Research Station, we have analyzed the water properties around the station as well as the characteristics of the fresh water from the Changjiang River and the influence of typhoons on the sea water. In general, the accuracy and stability of the temperature data are high, but those of the salinity data are worse than the specification of the instruments. The daily variation of temperature and salinity is mainly controlled by the vertical motion of a water column due to semi-diurnal tide and diurnal change in the solar insolation. Seasonal change is prominent in temperature data. The freshwater from the Changjiang River is the main cause of large salinity variation. In August 2003 and August 2004, about 10 days before fresh water was observed near the Jeju Island, low salinity water was observed at the Ieodo Station. On the other hand, in July 2005 fresh water was observed at the station but not at around the Jeju Island. In other words, the fresh water observed at the Ieodo Station does not always expand to the Jeju Island. Two strong typhoons passed by the station in September 2003 and August 2004. The effects of the typhoons were lasted for 3 to 4 days.

• Journal of Korean Elementary Science Education
• /
• 제18권2호
• /
• pp.65-77
• /
• 1999

The purpose of this study was to find out the effectiveness of metacognitive instruction model on the changes of science concepts, when it was applied to 6th grade students. To do this, students were tested with the achievement of molecules and molecular motion concepts and metacognitive self-regulation test as a pretest Based upon metacognitive instruction model and student's conception, instruction program were developed. This metacognitive strategy Program was applied to the experimental group and expository teaching was applied to the comparison group (followed the order and method in authorized science textbook and teachers handbook). When planned lessons were finished, students were given a post-test to find conceptual change. After six months students were given a test again to find retention effect. There was a significant difference in conceptual change and retention between comparison group and experimental group by treatment at p< .05 level, The difference between comparison group and experimental group was especially significant, when the situation of test item wasn't similar to that of the textbook Metacognitive instruction model was more effective to high group than low group in metacognitive self-regulation level on conceptual change and retention. So the metacognitive strategy Played an important role in conceptual change and retention. And we can recognize that the students who take part in the metacognitive lesson can apply the corrected concept to the other concrete situation because they can understand new concept accurately by metacognitive strategies. And we can guess that high group in metacognitive self-regulation level can team metacognitive strategy easily but relatively low group student have some trouble in learning new strategy.

• Journal of the Earthquake Engineering Society of Korea
• /
• 제13권1호
• /
• pp.27-34
• /
• 2009

Site amplification should be considered in order to estimate Soil-Structure Interaction (SSI), seismic source and attenuation parameters with a greater degree of reliability. The horizontal to vertical (H/V) ratio technique, originally proposed by Nakamura (1989), has been applied to analyze the surface waves in microtremor records. Recently, its application has been extended to the shear wave energy of strong motion in order to study the site transfer function. The purpose of this paper is to estimate the H/V spectral ratio using the observed data from 9 seismic stations distributed within the Southern Korean Peninsula, from the Odesan earthquake (2007/01/20). The results show that most of the stations have more stable amplification characteristics in a low frequency band than in a high frequency band. However, each seismic station showed its own characteristic resonant frequency and low and high frequency. The resonant frequency at each station should be estimated carefully, because the quality of seismic data is dependent on the resonant frequency. It can be obtained more reliable results of seismic source and attenuation parameters, if seismic ground motions which deconvolved from site transfer function is used. The site amplification data from this study can be used to generally classify the sites within the Southern Korean Peninsula.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제33권2C호
• /
• pp.192-199
• /
• 2008

In ultra-wideband (UWB) systems, conventionally, the synchronization is to align time phases of a locally generated template and any of multipath components to within an allowable range. However, the synchronization with a low-power multipath component could incur significant performance degradation in receiver operation (e.g., detection) after the synchronization. On the other hand, the synchronization with a high-power multipath component can improve the performance in receiver operation after the synchronization. Generally, the first one among multipath components has the largest power. Thus, the synchronization with the first path component can make better performance than that with low-power component in receiver operation after the synchronization, Based on which, we first propose an optimal decision rule based on a maximum likelihood (ML) approach, and then, develope a simpler suboptimal decision rule for selecting the first path component. Simulation results show that the system has good demodulation performance, which uses new synchronization definition and the proposed decision rules have better performance than that of the conventional decision rule in UWB multipath channels. Between macroblocks in the previous and the current frame. On video samples with high motion and scene change cases, experimental results show that (1) the proposed algorithm adapts the encoded bitstream to limited channel capacity, while existing algorithms abruptly excess the limit bit rate; (2) the proposed algorithm improves picture quality with $0.4{\sim}0.9$dB in average.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제40권12호
• /
• pp.1032-1039
• /
• 2012

The present paper deals with precise relative positioning of formation satellites with long baseline in low Earth orbit making use of L1/L2 dual frequency GPS carrier phase measurements. Kinematic approach means to describe the motion of objects without taking its mass/dynamics model into consideration. The advantage of the kinematic approach is that information about dynamics of the system is not applied, which gives more flexibility and could improve the scientific interest of the observations made by the mission. The ionosphere terms, which are not canceled by double differenced measurement equation in the case of the long baseline, are explicitly estimated as unknown parameters by extended Kalman filter. The estimated float ambiguities by EKF are solved by existing efficient integer vector search strategy under integer least square condition. For the integer vector search, we employ well known MLAMBDA. Finally, The feasibility and accuracy of processing scheme are demonstrated using the GPS measurements for two satellites in low Earth orbit separated by baselines of 100 km.

• Journal of Biomedical Engineering Research
• /
• 제35권5호
• /
• pp.125-131
• /
• 2014

The purpose of this study is to verify the utility of reflected photoplethysmography sensor using two green light emitting diodes that influenced by ambient light. Recently it has been studied that green light emitting diode is suitable for light source of reflected photoplethysmography sensor at low temperature and high temperature. Another study showed that, green light is better for monitoring heart rate during motion than led light. However, it has a bad characteristic about ambient light noise. To verify the utility of reflected photoplethysmography sensor using green light emitting diode, this study measures the photoplethysmography signal that is distorted by ambient light and will propose a solution. This study has two parts of research method. One is measurement system that composed sensor and board. The sensor is made up PE-foam and Non-woven fabric for flexible sensor. The photoplethysmography signal is measured by measurement board that composed high-pass filter, low-pass filter and amplifier. Ambient light source is light bulb and white light emitting diode that has three steps brightness. Photoplethysmography signal is measured with lead II electrocardiography signal at the same time and it is measured at the finger and radial artery for 1 minute, 1000 Hz sampling rate. The lead II electrocardiography signal is a standard signal for heart rate and photoplethysmography signal that measured at the finger is a standard signal for waveform. The test is repeated 3 times using three sensor. The data is processed by MATLAB to verify the utility by comparing the correlation coefficient score and heart rate. The photoplethysmography sensor using two green light emitting diodes is shown better utility than using one green light emitting diode and red light emitting diode at the ambient light. The waveform and heart rate that measured by two green light emitting diodes are more identical than others. The amount of electricity used is less than red light emitting diode and error peak detectability factor is the lowest.