• 한국식품영양과학회지
• /
• 제24권5호
• /
• pp.803-810
• /
• 1995

Gel bead의 효율적인 이용을 목적으로 산소요구성이 전혀 다른 두 균주로 구성된 혼합고정화 배양계의 개발을 시도하였다. 호기성 균으로서 A. awamori, 혐기성균으로서 Z. mobilis를 사용하여 생전분으로 부터 에탄올 생산을 행한 결과는 다음과 같다. 두 균주의 최적 혼합비율은 A. awamori $1.25{\times}10^{9}\;spore/L-gel$, Z. mobilis 0.5g cell/L-gel이었다. 배양이 완료된 후의 gel bead 내의 균주 분포는 각각 혐기부와 호기부, 즉 gel bead의 표면부와 중심부로 생육장소가 구분되어 있었다. A-Z계의 배양에서는 에탄올의 수율이 낮았고, 균사가 gel bead로 부터 누출되었다. 배양 개시 후 36시간째에 배양기의 면전을 특수 제조한 check valve가 부착된 실리콘 plug로 교환하여 혐기적 배양을 행한 A-Z 36계에서는 gel bead로 부터 균사의 누출이 상당히 억제되었고, pH가 4.3을 유지하면서, 에탄올의 수율이 대조구 보다 약2배 높게 나타났다.

• 한국전자파학회논문지
• /
• 제17권10호
• /
• pp.959-966
• /
• 2006

본 논문은 다이플렉서를 이용하여 디지털 셀룰라 대역($f_o$=880 MHz)과 IMT-2000 대역($f_o$=2,140 MHz) 기지국에서 동시에 사용 가능한 이중 대역 전치 왜곡 선형 전력 증폭기(Predistortion Linear Power Amplifier: PD LPA)의 설계 방법을 제시하였다. 입 출력단에 사용된 다이플렉서는 결함 접지 구조(Defected Ground Structure: DGS)를 이용한 저역 통과 여파기와 높은 Q값을 갖는 캐패시터와 마이크로 스트립 스터브를 이용한 고역 통과 여파기로 이루어져 있다. 입출력 반사 계수 특성을 좋게 하기 위하여 3 dB 하이브리드 결합기를 이용한 반사형 타입의 전치 왜곡 선형화기를 설계하였다. IS-95 CDMA IFA 신호와 WCDMA IFA 신호를 이용하여 각 대역에서 제작된 이중 대역 전치 왜곡 선형 전력 증폭기의 인접 채널 누설비(Adjacent Channel Leakage Ratio: ACLR) 개선 정도를 측정한 결과 880 MHz 대역에서 약 10 dB, 2,140 MHz 대역에서 약 9.36 dB 개선되었다.

• Journal of Chest Surgery
• /
• 제28권11호
• /
• pp.1032-1037
• /
• 1995

Between September 1988 and December 1993, 32 cases of benign esophageal stricture, of which 12 males and 20 females, were managed in Seoul National University Hospital hospital. Their age ranged from 2 to 61 years, and the mean age was 33.9 years. The ingestion of caustic agent was the most common cause, and the caustic material was acid in 16 patients [58% and alkali in 11patients [39% . Nearly all of the patients complained of dysphagia, and some of chest pain, epigastric pain, weight loss, vomiting, general malaise, and dyspnea. The most frequent site of stricture was found in the upper thoracic esophagus with 34% incidence followed by the lower thoracic esophagus[28% , whole esophagus[19% , and the mid esophagus[16% . The operations performed were 17[53% ECG[esophagocologastrostomy , 5[16% PCG[pharyngocologastrostomy , 5[16% EG[esophagogastrostomy , 2 EJG [esophagojejunogastrostormy by free jejunal graft , and 1 case each of EJ [esophagojejunostomy , esophageal end to end anastomosis, jejunostomy only, and gastrostomy only. In 23 patients [72% , diseased esophaguses were resected, using transhiatal total esophagectomy in 15 [47% and transthoracic partial esophagectomy in 8 [25% . Of those 23 patients, 3 patients [9.4% were diagnosed as esophageal carsinoma on microscopic examination. The postoperative most common complications were unilateral vocal cord palsy in 6 patients [19% , followed by cervical anastomosis leakage in 4 patients [12.5% , wound infection in 2 patients [6% , and pneumothorax in 2 patients [6% . Late death occurred 8 months after the operation in one patient, which was associated with infection due to anastomotic leakage. Our experience shows that the rate of mortality and the morbidity were low in patients receiving surgical management for esophageal stricture and that the cancer transformation rate was high. We recommend esophageal reconstruction surgery with esophagectomy [transhiatal or transthoracic for the esophageal stricture because it can avoid a chance of prevent cancer transformation.

• Journal of Korean Neurosurgical Society
• /
• 제41권3호
• /
• pp.161-165
• /
• 2007

Objective : Percutaneous approach to the middle thoracic vertebra through the transpedicular route for the patients with osteoporotic vertebral compression fractures is difficult due to the small size of the pedicle and parasagittally oriented vertebra body anatomy. The percutaneous vertebral body access [PVBA] technique utilizing the posterolateral extrapedicular approach avoids the pedicle and provides direct access to the vertebral body. The objective of this study is to evaluate the efficacy of the vertebroplasty utilizing PVBA technique for osteoporotic vertebral compression fractures in the middle thoracic vertebrae. Methods : A retrospective review was done on 20 patients who underwent vertebroplasty utilizing PVBA technique performed for painful osteoporotic compression fracture in the middle thoracic vertebrae at 22 levels from May 2003 to June 2006. The average amount of the injected cement was 1.5-2.5ml. The postprocedural outcome was assessed using a visual analogue scale [VAS]. Results : The treated vertebrae were T5 [1 level], T6 [5 levels], 17 [7 levels], and T8 [9 levels]. The compression rate and kyphotic angle were improved after procedure from $18%{\pm}13.4$ to $16%{\pm}13.8$ [p > 0.05] and from $6.9^{\circ}{\pm}6.7$ to $6.6^{\circ}{\pm}6.2$ [p>005], respectively. Preprocedural VAS was $8.2{\pm}0.70$ and was decreased to $2.1{\pm}1.02$ [p < 0.01] after treatment. Postprocedural cement leakage was noted in 3 levels [13.7%]. There were no cases of leakage to epidural space or neural foramen, segmental artery injury, and pneumothorax. Conclusion : These results suggest that the complication rates are low and good results can be achieved with vertebroplasty utilizing PVBA technique for the osteoporotic vertebral compression fractures especially in the middle thoracic vertebrae.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.255-260
• /
• 2004

Recently, the technologies related to the swash plate type oil hydraulic piston pump are requiring extreme technologies to overcome the limit of high efficiency in cope with high speed and pressure, and are devoted to compact the unit, to gain low noise level, and to adopt electronic technologies, and the question regarding to maximize the mechanical efficiency, that is, to minimize the torque loss by minimizing the leakage loss in the relative sliding region but these are in trade-off relation that tribological responding is very difficult. Cylinder block-valve pate in high speed relative sliding motion has the characteristics that should be extremely controlled for the optimization of these leakage loss and mechanical efficiency, and pressure resistance designing of them is important for high pressure performance. But, studies on the stress analysis of these parts have not been performed briskly, so in this paper the stress distribution and the region where the highest displacement appears are described through the static stress analysis using CATIA V5. Through the future studies on these theme, it has the purpose of finding the suitable materials for the other parts as well as cylinder block and valve plate, in cope with high pressure operation through the stress analysis with the most similar conditions for the practical operation.

• Journal of Korean Neurosurgical Society
• /
• 제42권5호
• /
• pp.363-366
• /
• 2007

Objective : Kyphoplasty performed in the middle thoracic spine presents technical challenges that differ from those in the lower thoracic or lumbar region due to small pedicle size and angular severity for thoracic kyphosis. The purpose of this study was to evaluate the efficacy of balloon kyphoplasty through extrapedicular approach for the treatment of intractable osteoporotic compression fractures in the middle thoracic spine. Methods : The patients who were performed with one level balloon kyphoplasty through extrapedicular approach due to painful osteoporotic compression fractures at T5-T8 from June 2003 to July 2005 were retrospectively analyzed. Imaging and clinical features were analyzed including involved vertebrae level, vertebral height, Injected cement volume, clinical outcome and complications. Results : Eighteen female patients (age ranged from 60 to 77 years old) were included in this study. The average amount of the implanted cement was $4.2{\pm}1.5\;cc$. The mean cobb angle and compression rate were improved from $12.1{\pm}6.5^{\circ}$ to $8.5{\pm}7.2^{\circ}$ and from 30% to 15%, respectively. The mean pain score (visual analogue scale) prior to kyphoplasty was 7.9 and it decreased to 3.0 after the procedure. Cement leakage to the adjacent disc (2 cases) and paravertebral soft tissues (1 case) were seen but there were no major complications such as pneumothorax, segmental arte 이 Injury, pulmonary embolism, or epidural leakage. Conclusion : Balloon kyphoplasty through extrapedicular approach is considered as a safe and effective in treating the middle thoracic regions with low complication rate.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.45-49
• /
• 2001

We have investigated physical and electrical properties of the Hf $O_2$/HfS $i_{x}$/ $O_{y}$ thin film for alternative gate dielectrics in the metal-oxide-semiconductor device. The oxidation of Hf deposited directly on the Si substrate results in the H $f_{x}$/ $O_{y}$ interfacial layer and the high-k Hf $O_2$film simultaneously. Interestingly, the post-oxidation N2 annealing of the H102/H1Si70y thin films reduces(increases) the thickness of an amorphous HfS $i_{x}$/ $O_{y}$ layer(Hf $O_2$ layer). This phenomenon causes the increase of the effective dielectric constant, while maintaining the excellent interfacial properties. The hysteresis window in C-V curves and the midgap interface state density( $D_{itm}$) of Hf $O_2$/HfS $i_{x}$/ $O_{y}$ thin films less than 10 mV and ~3$\times$10$^{11}$ c $m^{-2}$ -eV without post-metallization annealing, respectively. The leakage current was also low (1$\times$10-s A/c $m^2$ at $V_{g}$ = +2 V). It is believed that these excellent results were obtained due to existence of the amorphous HfS $i_{x}$/ $O_{y}$ buffer layer. We also investigated the charge trapping characteristics using Fowler-Nordheim electron injection: We found that the degradation of Hf $O_2$/HfS $i_{x}$/ $O_{y}$ gate oxides is more severe when electrons were injected from the gate electrode.e electrode.e.e electrode.e.

• Journal of Chest Surgery
• /
• 제51권1호
• /
• pp.1-7
• /
• 2018

Background: Sutureless aortic valve replacement (SU-AVR) has been developed as an alternative surgical treatment for patients with symptomatic severe aortic stenosis (AS). The aim of this study was to evaluate the clinical outcomes of SU-AVR through an assessment of hemodynamic performance and safety. Methods: From December 2014 to June 2016, a total of 12 consecutive patients with severe AS underwent SU-AVR. The endpoints were overall survival and valve-related complications (paravalvular leakage, valve thrombosis, migration, endocarditis, and permanent pacemaker implantation). The mean follow-up duration was $18.1{\pm}8.6months$. Results: The mean age of the patients was $77.1{\pm}5.8years$ and their mean Society of Thoracic Surgeons score was $9.2{\pm}17.7$. The mean cardiopulmonary bypass and aortic cross-clamp times were $94.5{\pm}37.3$ minutes and $54.9{\pm}12.5minutes$, respectively. Follow-up echocardiography showed good prosthesis function with low transvalvular pressure gradients (mean, $13.9{\pm}8.6mm\;Hg$ and peak, $27.2{\pm}15.0mm\;Hg$) at a mean of $9.9{\pm}4.2months$. No cases of primary paravalvular leakage, valve thrombosis, migration, or endocarditis were reported. A new permanent pacemaker was implanted in 1 patient (8.3%). The 1-year overall survival rate was $83.3%{\pm}10.8%$. Conclusion: Our initial experience with SU-AVR demonstrated excellent early clinical outcomes with good hemodynamic results. However, there was a high incidence of permanent pacemaker implantation compared to the rate for conventional AVR, which is a problem that should be solved.

• 한국전기전자재료학회논문지
• /
• 제14권7호
• /
• pp.567-571
• /
• 2001

We investigated the structural and electrical properties of Ba(Zr$_{x}$Ti$_{1-x}$ )O$_3$(BZT) thin films with a mole fraction of x=0.2 and a thickness of 150 nm. BZT films were prepared on Pt/SiO$_2$/Si substrate with the various substrate temperature by a RF magnetron sputtering system. When the substrate temperature was above 50$0^{\circ}C$, we obtained multi-crystalline BZT films oriented to (110), (111), and (200) directions. As the substrate temperature increases, the films are crystallized and their dielectric constants become high. C-V characteristic curve of the film deposited at high temperature is more sensitive than that of the film deposited at low temperature. The parameters of the BZT film are as follows; the dielectric constants(dissipation factors) at 1 MHz are 95(0.021), 140(0.024), and 240(0.033) deposited at 400, 500, $600^{\circ}C$, respectively; the leakage currents at 666.7 kV/cm are 5.73, 23.5, and 72.8x10$^{-8}$ A/$\textrm{cm}^2$ fo the films deposited at 400, 500, and 600 $^{\circ}C$, respectively; the leakage currents at 666.7kV/cm are 5.73, 23.5, and 72.8x10$^{-8}$ A/$\textrm{cm}^2$ for the films deposited at 400, 500, $600^{\circ}C$, respectively. The BZT film deposited at 40$0^{\circ}C$ shows stable electrical properties, but dielectric constant for application is a little small.ll.

• 한국작물학회지
• /
• 제49권1호
• /
• pp.25-29
• /
• 2004

The responses of soybean seeds were evaluated to accelerated aging and gamma irradiation with regard to germination, seed leakage, seed leachate component and dry weight of hypocotyl and primary root of the germinating seed. Accelerated aging significantly reduced the final germination rate while gamma irradiation increased the final germination rate. Furthermore, the interactive effects occurred that the final germination rate of 5-day aged seeds increased considerably in response to 4 Gy of gamma irradiation. The extent to which the electrolyte was leaked from the seeds (conductivity) was significantly affected by accelerated aging and showed a close negative correlation with the germination rate. Gamma irradiation, however, did not significantly affect the electrical conductivity of seed leachate. The accelerated aging significantly increased the concentrations of the particular electrolytes leaked from the seeds while the gamma irradiation did not affect those concentrations. Of the electrolytes leaked from the seeds, Ca and Mg showed relatively lower concentrations while K showed greater concentrations than others. Moreover, N and P showed similar responses to aging treatment. Aging treatment significantly affected dry weight (DW) of hypocotyls and primary root. Also, gamma irradiation decreased DW of hypocotyls and primary root, particularly for 8 Gy associated with 5 days aging treatment. The data were discussed in terms of the relationships of seed vigor with aging treatment and gamma irradiation.