• ETRI Journal
• /
• 제18권3호
• /
• pp.171-179
• /
• 1996

Fully passivated low noise AlGaAs/InGaAs/GaAs pseudomorphic (PM) HEMT with wide head T-shaped gates were fabricated by dose split electron beam lithography (DSL). The dimensions of gate head and footprint were optimized by controlling the splitted pattern size, dose, and spaces of each pattern. We obtained stable T-shaped gate of $0.15{\mu}m$ gate length with $1.35{\mu}m-wide$ head. The maximum extrinsic transconductance was 560 mS/mm. The minimum noise figure measured at 18 GHz at $V_{ds}=2V andI_{ds}=17mA$ was 0.41 dB with associated gain of 8.19 dB. At 12 GHz, the minimum noise figure and an associated gain were 0.26 and 10.25 dB, respectively. These noise figures are the lowest values ever reported for GaAs-based HEMTs. These results are attributed to the extremely low gate resistance of wide head T-shaped gate having a ratio of the head to footprint dimensions larger than 9.

• 한국유체기계학회 논문집
• /
• 제10권4호
• /
• pp.21-28
• /
• 2007

The ratio of disk friction loss in a centrifugal pump is very large for the total pump loss in the range of very low specific speed. Therefore, impeller radius should be shortened to increase the pump efficiency because the disk friction loss is proportional to the fifth power of impeller radius. In order to compensate the decreased head by the shortened impeller radius, vane angle at impeller outlet should be increased. However, as the vane angle at impeller outlet becomes larger, performance instability occurs at low flow rate regions. In this study, J-Groove is adopted to suppress the performance instability and detailed examination is performed for the influence of the J-Groove on the pump performance. The results show that J-Groove gives good effect on the suppression of performance instability. Moreover, as J-Groove increases pump head considerably, the pump size can be smaller for head requirements.

• 한국의류학회지
• /
• 제29권5호
• /
• pp.737-744
• /
• 2005

This study was aimed to provide the measurement data and shape classification of the head of the Korean male children for the headwear sizing systems. Five hundred twenty male children, aged nine to twelve years, participated f3r this study. The 17 regions on the head and height, weight of the subjects were directly measured by the expert experimenters. Factor analysis, cluster analysis, GLM analysis and Tukey HSD test were performed using these data. Through factor analysis, low factors were extracted upon factor scores and those factors comprised $69.76\%$ for the total variances. Three clusters as their head shape were categorized using four factor scores by cluster analysis. Type 1 was characterized by the widest width and Bitragion arc, shortest head length. Type 2 had the longest head length and the widest side width and the highest head length and head circumference. Type 3 was characterized by the smallest head circumstance, head width and side width, and medium head length.

• 간호행정학회지
• /
• 제15권1호
• /
• pp.45-53
• /
• 2009

Purpose: This study was to analyze the relationship between head nurse's leadership, staff nurse's health promotion life style and job satisfaction and nursing work performance. Method: The duration for investigation took place from September 11 to 29, 2006 and 501 staff nurses. Results: Nursing work performance of 3 groups of nurses that group of nurses who evaluated leadership of head nurse is high in authority aspect but is low in harmony aspect(p<.05), group of nurses who evaluated leadership of head nurse is low in authority aspect but is high in harmony aspect(p<.01), and group of nurses who evaluated leadership of head nurse is high both in authority aspect and in harmony aspect(p<.001), was all statistically much higher than group of nurses who evaluated leadership of head nurse is low both in authority aspect and in harmony aspect. Conclusion: nursing work performance of staff nurses are compositively affected by social psychological factor such as job factor, health promotion conduct, and job satisfaction and leadership factor of head nurse.

• 한국안전학회지
• /
• 제16권2호
• /
• pp.13-21
• /
• 2001

The effect of water spray for the fire sprinkler depends on droples distribution over maximum possible floor area. The present study are carried out for the characteristics of water spray and droplets experimentally and numerically km two fire sprinkler heads which are CHM head and CHl heal CHl head is self-production and CHl head is widely used up to date. As the result of using CHM head, water spray and droplets are distributed over large area because CHM head has smooth surface and non-flamed shape. When the pressure of fire sprinkler head is low, SMD(sauter mean diameter) is large and when the pressure of fire sprinkler head is high, SMD is small.

• 한국항공우주학회지
• /
• 제37권11호
• /
• pp.1096-1103
• /
• 2009

연소기 헤드부는 극저온 유체인 액체산소가 고압으로 작동하고, 동시에 연소기의 추력으로 인한 하중을 받기 때문에, 극저온에서의 헤드의 구조 안정성 해석을 위한 재료의 변형 거동 예측은 매우 중요하다. 헤드부의 변형 거동을 예측하기 위해 재료의 저온에서의 인장 변형 거동을 묘사할 수 있는 구성 방정식을 Kocks의 전위 에너지 장벽 모델을 바탕으로 열적 요소와 비열적 요소의 결합으로 구성하였으며, 극저온에서 장애물들의 증가로 인한 응력의 열적 요소의 증가를 묘사하기 위해서, 장애물로 인해 발생하는 응력 요소를 Ramberg-Osgood 형태의 식으로 구성하였다. 본 모델은 극저온과 상온의 넓은 온도 영역에서 재료의 변형 거동을 잘 예측하였다.

• 대한두경부종양학회지
• /
• 제36권1호
• /
• pp.15-19
• /
• 2020

Basal cell adenocarcinoma is 1 ~ 2 % of salivary gland carcinoma. It was recently classified as low grade malignancy. It is low grade malignant counterpart of basal cell adenoma. It has similar morphologic attributes with basal cell adenoma, but it has distinctive malignant potential including infiltrative growth into surrounding tissues and distant metastasis. Recently, we have experienced a case of basal cell adenocarcinoma arising from the bilateral parotid gland in a 38-year old woman who was previously operated on superficial parotidectomy due to pleomorphic adenoma. We report this rare case with a review of literature.

• 산업기술연구
• /
• 제22권A호
• /
• pp.43-48
• /
• 2002

Acoustic modes of a vehicle compartment dominate the noise characteristics of the vehicle system in the low frequency range. Vehicle compartments have head liner and air gap of proper thickness to mount a interior lamp, as well as to have a good sound insulation and absorption performance. This study estimates the acoustic modal property of the medium size passenger car by experiment and by finite element analysis and also, investigates the effect of the head liner on the acoustic mode of the passenger compartment to obtain useful information for low noise compartment design.

• Journal of information and communication convergence engineering
• /
• 제22권1호
• /
• pp.1-6
• /
• 2024

Energy efficiency in wireless sensor networks (WSNs) is a critical issue because batteries are used for operation and communication. In terms of scalability, energy efficiency, data integration, and resilience, WSN-cluster-based routing algorithms often outperform routing algorithms without clustering. Low-energy adaptive clustering hierarchy (LEACH) is a cluster-based routing protocol with a high transmission efficiency to the base station. In this paper, we propose an energy consumption model for LEACH and compare it with the existing LEACH, advanced LEACH (ALEACH), and power-efficient gathering in sensor information systems (PEGASIS) algorithms in terms of network lifetime. The energy consumption model comprises energy-sensitive cluster formation and a cluster head selection technique. The setup and steady-state phases of the proposed model are discussed based on the cluster head selection. The simulation results demonstrated that a low-energy-consumption network was introduced, modeled, and validated for LEACH.

• International Journal of Fluid Machinery and Systems
• /
• 제6권3호
• /
• pp.152-159
• /
• 2013

A two-dimensional Darrieus-type hydroturbine system, installed with a wear for flow streams such as small rivers and waterways, has been developed for hydropower utilization of extra-low head less than 2m. There are several problems such as flow rate change and flowing wastes to be solved for its practical use in natural flow streams. In the present study, at first, a design guideline in the case of overflow or bypass flow is shown by using simple flow model. Next, in order to avoid the unexpected obstacles flowing into the hydroturbine, an installation of waste screening system is examined. It is confirmed that the screen is effective with some amount of bypass flow rate, however the output power is remarkably deteriorated.