• Journal of The Korean Society of Clinical Toxicology
• /
• v.9 no.2
• /
• pp.49-55
• /
• 2011

Purpose: Acetanilide has been in widespread use as an amide herbicide compound. However, available data regarding acute human poisoning is scarce. The aim of this study was to analyze the clinical characteristics of acetanilide poisoning in order to identify the risk factors associated with severity. Methods: We conducted a retrospective observational study encompassing the period January 2005 to December 2010, including adult ED patients suffering from acetanilide intoxication. Toxicological history, symptoms observed, clinical signs of toxicity, and laboratory test results were collected for each patient. The patients were classified into two groups for analysis, according their poisoning severity score (PSS). Resulting clinical data and prognostic variables were compared between mild-to-moderate poisoning (PSS 1/2 grades), and severe poisonings and fatalities (PSS 3/4 grades). Results: There were a total of 37 patients, including 26 alachlor, 6 s-metolachlor, 4 mefenacet, and 1 butachlor cases. The majority of patients (81.1%) were assigned PSS 1/2 grades. Changes in mental status and observation of adverse neurologic symptoms were more common in the PSS 3/4 group. The median ingested volume of amide herbicide compound was 250 ml (IQR 200-300 ml) in the PSS 3/4 group, and 80 ml (IQR 50-138 ml) in the PSS 1/2 group. Also, the median GCS observed in the PSS 3/4 group was 13 (IQR 10-14), which was markedly low as compared to a median GCS of 15 in the PSS 1/2 group. Overall mortality rate was 5.4%, and profound cardiogenic shock was observed prior to death in all fatalities. Conclusion: When compared to previous reports, acute acetanilide poisoning resulted in relatively moderate severity. The presence of neurologic manifestations, hypotension, lower GCS score, and larger ingested volumes was associated with more serious effects and mortalities.

• Journal of the Korean Society of Tobacco Science
• /
• v.26 no.1
• /
• pp.35-42
• /
• 2004

This study was carried out to examinate the effect of aging period on chromatic, chemical and organoleptic characteristics, and to evaluate of optimum aging period for each grade in burley leaf tobacco. The leaf tobaccos were produced in 2000, and threshed, redried and packed in carton box under the current methods. Four grades of processed leaf(A3T, B1T, C1W and D3W) were stored during 24 months (May 10, 2001 to April 31, 2003) in warehouse of Chungju Leaf Tobacco Processing Factory. The leaf tobaccos were sampled at three month intervals for analysis of chromatic, chemical and organoleptic properties. pH values of four grades, and Yellow(b) of A3T and BIT were also significantly decreased during the aging. Filling values, tar, nicotine and CO contents of tobacco smoke, and puff number of cigarettes were not significantly changed during the aging. Positive correlation coefficients were significantly observed between irritation of the calculated attributes from contents of volatile oil components in leaf tobacco and that of the panel sensory attributes. The ratio of maximum change in irritation attribute was larger than that in taste attribute during aging. The calculated irritations of 18～24 months aging for A3T and B1T were significantly lower than zero-aging, while those of C1W and D3W were not significant among aging periods. The panel irritations of 12～15 months aging for four grades were low tendency. The results suggest that decrease of aging period for thin leaf from 21～24 to 12～15 months may be beneficial to save storage cost in burley tobacco.

• Archives of Craniofacial Surgery
• /
• v.18 no.2
• /
• pp.82-88
• /
• 2017

Background: Turbinate hypertrophy is one of the common causes of chronic nasal obstruction. In principle, therapeutic guidelines recommend medical treatment. Failure to treat turbinate thickening despite drug therapy may indicate the need for surgery. The main aim of this study was to determine the effect of radiofrequency surgery, among various other surgical procedures, on people with both nasal septal deviation and turbinate hypertrophy. Methods: Among people with nasal deviation who visited the subject hospital between July 2008 to July 2014, 21 people with nasal septal deviation and severe turbinate hypertrophy before their surgery had undergone septoplasty with turbinoplasty using radiofrequency combined with septoplasty. The degree of the turbinate's hypertrophy was appraised in all the patients before and after the surgery using the rhinoscopy, and acoustic rhinometry was objectively carried out. The subjective effect of the turbinoplasty using radiofrequency was explored through the visual analog scale (VAS) score. Results: The degree of contraction of the nasal mucosa after the rhinoscopy changed from Grades 3 and 4 (100%) to Grades 1 and 2 (95.2%) and Grades 3 (4.8%). The minimal cross-sectional area significantly increased from $0.44{\pm}0.07$ to $0.70{\pm}0.07cm^2$ (p<0.05). The nasal cavity volume increased from $4.79{\pm}0.49$ to $6.76{\pm}0.55cm^2$ (p<0.05). The subjective symptoms evaluated with VAS score a year after the surgery significantly improved (p<0.05). Conclusion: Turbinoplasty using Coblator with septoplasty is an effective treatment method because it expands nasal cavity, has a low incidence of complications, subjectively improves symptoms, and has short treatment duration.

• Korean Institute of Interior Design Journal
• /
• v.16 no.5
• /
• pp.89-97
• /
• 2007

This study compares, analyzes and reevaluates color conditions and images before and after the execution of the 7th curriculum with elementary schools in Gwang-ju Metropolitan City based on the fact that color among physical environments of elementary classrooms has an important influence on children's emotion and draws problems and aims to accumulate the basic materials for preparing guidelines of improving color environment at general classrooms of elementary schools. Consequently, according to color conditions, major colors on ceiling and wall were high brightness/nigh chroma of Y and YR line regardless of division of grades and other color factors of classroom showed that wall and ceiling used similar colors, but brightness was higher after change than before it. In evaluation of color images, lower grades showed negative color images such as 'common,' 'rustic,' and 'strange' before change, but they showed positive color images after change such as 'clean,' 'unique,' and 'soft'. But, most of higher grades showed negative reactions before change such as 'common,' 'strange,' and 'rustic' and they showed positive reactions after change only in such items as 'clean,' 'warm,' and 'unique', but Indicated negative reactions in remaining items such as 'strange,' 'rustic,' 'stiff,' and 'artificial'. Accordingly, in using colors for lower grade classroom, arrangement of colors through adjustment of brightness and chroma between ceiling, wall and other components based on coloring of high brightness and low chroma of similar colors should be considered and for higher grade classroom, arrangement of colors of unique images of mid-brightness/mid-chroma among warm color lines of similar colors should be examined.

• Journal of the Korean Society for Library and Information Science
• /
• v.55 no.2
• /
• pp.131-146
• /
• 2021

In this study, overlapping recommended books in different schools were positively analyzed and the extent to which the recommended books leading to actual loan was statistically analyzed. The purpose of the study is to confirm the effects of recommended books by analyzing the data and extracting the proofs. For the method of research, eighteen elementary schools' recommended book lists and thirteen elementary schools' loan data were collected and compared by schools, by grades in a basic statistical analysis method. The result shows that recommended books similarity was low and recommended books affected the total volume of lend books. Loan frequency by grades showed the difference and in every school, lower grades had high loan frequency. The result of this study will be applied as basic data for applying recommended books in school libraries.

• Journal of Sericultural and Entomological Science
• /
• no.12
• /
• pp.37-45
• /
• 1970

The processing management forms of our country's filature factories in 1969 are summarized as follows. (1) About 80％ of total cocoon collection is made within 5 days involving peak day, and 10％ of cocoon collection is finished until 3 days before and after the peak day, (2) About 92％ of alive cocoons transported on unpaved road, and about 40％ of the cocoons purchased by all factories are loaded on trucks from common selling station which is far beyond 40km, therefore a new packing system of alive cocoons to drop the damage of cocoon qualities, should be taken. (3) 22％ of all factories in our. country have only low-temperature cocoon drying machine. Therefore the installment of hot-air cocoon drying machine is required urgently. (4) In view of cocoon qualities in our country, the grouping method of cocoon for reeling. taken by about 50％ of the factories at percent, which classify cocoons for reeling as high group (1,2,3,4 grades) and low group(5,6 grades), will have to be replaced by the method tat classify them high group (1,2 grades) middle group (3,4 grades), low group (5,6 grades). (5) The .ratio of cocoon assorting stood about 10％ in multi-ends reeling, about 15％ in automatic reeling, conclusively, the ratio of cocoon assorting for automatic reeling was higher tan that for multi-ends reeling. One person's ability for a day in cocoon assorting reaches to about 80-100kg. (6) Cocoon cooking condition requires the increase of the cooking time, the pressure and temperature used to be prolonged as much as the qualities of cocoons are material cocoon ior automatic and double cocoon machines are treated uncompletely. (7) Automatic silk reeling is being performed at 1-2$^{\circ}C$ lower in reeling water temperature and operated at about twice velocity. (8) The temperature and humidity of rereeling room stood at 25$^{\circ}C$, 67.2％ R.H and 32.3$^{\circ}C$, 51.9％ R.H of rereeling machine are showed, Average rereeling velocity is 233m/min and large reefs charged for one person are 7.5 reels and form of skein used in all factories is double skein. (9) About 73％ of water sources for filature used under-earth water. About 48％ of all filature factories in our country have not yet water purifying equipments. Installation of the equipment for these factories seems to be urgent, (10) Denier .balance, sizing reel, seriplane, are being used in most factories as self-inspection apparatus. (11) More than 90％ of the factories use the vacum tank in rereeling process and about 20％ of them use it in cocoon cooing process (12) Only 21％ of the factories use chemicals in filature process. About all them use "Seracol 100" in cocoon cooking process and "Seracol 500" in rereeling process, (13) Above survey results explain each all factories show large difference in the processing management. Therefore, it is believed that intercommunication through seminar or technical exchange will contribute to the production evaluation of cocoon in our filature industry.

• Journal of Korean Elementary Science Education
• /
• v.17 no.2
• /
• pp.55-65
• /
• 1998

This study was intended to suggest the desirable direction in the 7th national curriculum revision through the analysis of the elementary science textbooks in the 6th national curriculum. The analysis system was composed of three categories, (1)knowledge (2)inquiry process and (3)attitude. And knowledge was divided into fact, concept and rule. And inquiry process was divided into thirteen subcategories such as manipulating experimental apparatus, observing, measuring, recording data, classifying, interpreting/ predicting, determining relationship/ causal explanation, extrapolating/ interpolating, drawing conclusions/ formulating a generalization or model, evaluating, formulating a problem, generating a hypothesis and designing an experiment/ controlling variables. Each sentence in the textbooks was considered as an analyzing unit. The frequency and percentage of each category were counted and the ratios were calculated. The findings could be summarized as follows: 1. The content of the elementary science textbooks was composed of knowledge 10.3%, inquiry process 88.8%, attitude 0.8% respectively. 2. As increasing the grades, the ratio of knowledge showed high frequency, but that of attitude showed low frequency. 3. In All the grades, the ratio of observing was the highest in inquiry process. 4. In the domain of physics and chemistry, the manipulating experimental apparatus showed high frequency. In the domain of biology and earth science, the role of observing was emphasized.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.607-614
• /
• 1996

A computer vision based automatic intelligent sorting system for dried oak mushrooms has been developed. The developed system was composed of automatic devices for mushroom feeding and handling, two sets of computer vision system for grading , and computer with digital I/O board for PLC interface, and pneumatic actuators for the system control. Considering the efficiency of grading process and the real time on-line system implementation, grading was done sequentially at two consecutive independent stages using the captured image of either side. At the first stage, four grades of high quality categories were determined from the cap surface images and at the second stage 8 grades of medium and low quality categories were determined from the gill side images. The previously developed neuro-net based mushroom grading algorithm which allowed real time on-line processing was implemented and tested. Developed system revealed successful performance of sorting capability of approximate y 5, 000 mushrooms/hr per each line i.e. average 0.75 sec/mushroom with the grading accuracy of more than 88%.

• Textile Coloration and Finishing
• /
• v.20 no.1
• /
• pp.1-7
• /
• 2008

The study has attempted to introduce a new coating than the conventional standardized method of spray, padding and roll coating. The study has focused on finding condition for separating water and organic layer in marble bath and surface effects according to kind of raw hide. It was found that dyestuff-free was to be used in water layer and the input amount of initial insoluble pigment to be added in marble bath should be adjusted following the change of surface area of the marble bath in order to get efficient marble effect while preventing coagulation of water and organic layers. Eventually, amorphous high value-added leather could be obtained treated in process other than the conventional standardized method. Even raw hides of low grades($C{\sim}E$ grades) could be processed into amorphous marble effect that could conceal or shield surface scratches by the colorant, which eventually eliminated necessity of using excessive amount of chemicals in the coating process leading to achieving high quality marble leather of natural look.

• Corrosion Science and Technology
• /
• v.9 no.5
• /
• pp.175-186
• /
• 2010

The auto industry is demanding more ductile high-strength steel grades to build lighter and stronger car bodies. The hot-dip galvanizing problems of these new steel grades are creating a demand for an improved method to control zinc wettability. The simplest way to improve zinc wettability on industrial hot-dip galvanizing lines is to increase the strip immersion temperature at zinc bath entry for enhancing the aluminothermic reaction. However, this practice increases the reactivity due to overheating the zinc in the snout which induces the formation of brittle Fe-Zn compounds at the strip/coating interface with the formation of higher amounts of dross in the zinc bath and snout contamination. Thus, this simple practice can only be utilized for short production periods of one to two hours without deteriorating coating quality. This problem has been solved by employing a technique that allows the use of a higher and attuned strip immersion temperature at zinc bath entry while still maintaining a constantly low zinc bath temperature. This has been proven to provide the solution for both the improved wettability and a significant reduction in the amounts of dross in the zinc bath.